Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 16,775 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 8,463 part numbers: Motion Control Products     GLEASON 2,860 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 1,628 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 457 part numbers: Electrical Control Products   HUBBELL 1,429 part numbers: Electrical Control Products   SUPERBOLT 113 part numbers: Fastening Solutions   RENOLD 123 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

Rotary Limit Switches, Position Sensors, Resolvers, Encoders   1980 Rotating Cam Limit Switch   DESCRIPTION   The Series 1980 Micro-Adjust Rotating Cam Limit Switch is a pilot device used for heavy duty material handling mechanisms, mechanical presses, packaging machines, rotary tables, and in many other applications where repetitive and sequential operations are required in control circuitry. When motion is expressed in shaft rotation, either thru a roller chain, gear train, or directly, the Rotating Cam Limit Switch makes it possible to open or close independent circuits at any desired angular positions. The Series 1980 is available in NEMA 1, NEMA 4 & 5, NEMA 7, NEMA 9, and NEMA 12 enclosures. The units can be ordered with 2 to 40 circuits.   SPECIFICATIONS   Resolver   Resolution - 12 bit resolution (4096 counts) RPM - 1024 max.   DeviceNet   Conformance - This product has been tested by ODVA's authorized Independent Test Lab and found to comply with ODVA Conformance Test Software Version A-12. Power Requirements - 92mA @ 11Vdc typical - 67mA @ 24Vdc typical. InRush - 350mA @ 11Vdc for 20 ms - 450mA @ 25Vdc for 10 ms. Device Type - "Generic" Communications - Group 2 slave only. Messages supported - Polled, Bit Strobed, Explicit. Baud Rates - 125K, 250K, 500K Position Rate - 915 microseconds RPM - 29.29 ms Scale Factor - 2 to 4096 Position Range - 0 to 1 less than scale factor. Setpoints - Separate ON and OFF points for each setpoint. Quantity - 8 Range - 0 to 1 less than scale factor. Approvals - CE Operating Temperature -20oC to +70oC Storage Temperature -40oC to +85oC   • 1980S Rotating Cam Limit Switch Manual • 1980 Ordering Guide and Technical Information • 1950 Precision Snap Switch Information • Drawing Gemco 1950 Snap Switches • Dimension Drawing NEMA 4 RCLS 2-40 CIR W SDGR • NEMA 7 and NEMA 9 Explosion-Proof Statement, Rev A       1980 Rotating Cam Limit Switch Set-up Procedure No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-P0034600 Ametek Gemco Cam Tool  Part P0034600  Old Part P-346-B  Timing & Dwell Adjustment Tool  For 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 7 Days  Dated 01-2023  (1LB) H 4" L 5" W 4" Box 42 $5.00                                 Stand Alone Brake Monitoring Module and Accessories No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-SD0202900 Ametek Gemco Stand Alone Brake Monitor Module  Part SD0202900  NEMA 1 Enclosure with Cover and Shaft  Ships in 2 Weeks  Dated 01-2021 - 0 $306.00 2 AME-SD0213300 Ametek Gemco Stand Alone Brake Monitor Module  Part SD0213300  NEMA 12 Enclosure with Cover & Shaft  Ships in 3 Weeks, Peck MI  Dated 01-2021 - 0 $409.00 3 AME-SD0117800 Ametek Gemco Cam 1980  Part SD0117800  Old Part SD-1178-C  Mold # P.268.B  Standard Adjustable Cam Assembly  Parts P0035600 & P0035700  Includes 2 Roll Pins for installation  For some - most 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2024  (1LB) H 4" L 6" W 4" Box 0 $155.00 4 AME-SD0197700 Ametek Gemco Disc  Part SD0197700  Electronic Pulse Generating Disc  Optical Pulse Disc for 1980 Series RCS  Normally aStock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2021  (1LB) H 4" L 6" W 4" Box - 1 $100.00 5 AME-SD0194800 Ametek Gemco Electronic Pulse Generating Switch  Part SD0194800  5 Volt DC  For Brake Monitor  Ships in  Dated  (1LB) H 6" L 4" W 4" 0 $395.28 6 AME-SD0157100 Ametek Gemco Roller Follower Assembly  Part SD0157100  aka P-518-B P-520-B  Limit Switch Roller Follower  Mounts between the Cam & Snap Switch  Increases switch life on 1980 Series Cam Box's  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 178 $38.95 7 AME-1950-1-B-A-AO Ametek Gemco Switch 1950  Part 1950-1-B-A-AO  19501BAA0  1950 = Precision, Snap Action, Switch Assembly  1 = SPDT, Single Pole Double Throw  can be wired for N.O or N.C. Circuit  Four Screw Terminals  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC / DC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 95 $63.00 8 AME-1950-4-B-A-AO Ametek Gemco Switch 1950  Part 1950-4-B-A-AO  19504BAAO  19504BAA0  1950 = Precision, Snap Action, Switch Assembly  4 = Double Pole Double Throw / D.P.D.T.  Eight Screw Terminals, can be wired for Normally Open or   Normally Close Circuits  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals, Qty., 8  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 0 $123.00 Add-On Brake Monitoring Module and Accessories No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-SD0195800 Ametek Gemco Module  Add-On, Brake Monitor Module Assembly  NEMA 1 Enclosure with Cover & Shaft  [1/2017]  [1/2018]  [1/2018] - 0 $306.00 2 AME-SD0117800 Ametek Gemco Cam 1980  Part SD0117800  Old Part SD-1178-C  Mold # P.268.B  Standard Adjustable Cam Assembly  Parts P0035600 & P0035700  Includes 2 Roll Pins for installation  For some - most 1980 Series Cam Limit Switches  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2024  (1LB) H 4" L 6" W 4" Box 0 $155.00 3 AME-SD0197700 Ametek Gemco Disc  Part SD0197700  Electronic Pulse Generating Disc  Optical Pulse Disc for 1980 Series RCS  Normally aStock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2021  (1LB) H 4" L 6" W 4" Box - 1 $100.00 4 AME-SD0194800 Ametek Gemco Electronic Pulse Generating Switch  Part SD0194800  5 Volt DC  For Brake Monitor  Ships in  Dated  (1LB) H 6" L 4" W 4" 0 $395.28 5 AME-SD0157100 Ametek Gemco Roller Follower Assembly  Part SD0157100  aka P-518-B P-520-B  Limit Switch Roller Follower  Mounts between the Cam & Snap Switch  Increases switch life on 1980 Series Cam Box's  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 178 $38.95 6 AME-1950-1-B-A-AO Ametek Gemco Switch 1950  Part 1950-1-B-A-AO  19501BAA0  1950 = Precision, Snap Action, Switch Assembly  1 = SPDT, Single Pole Double Throw  can be wired for N.O or N.C. Circuit  Four Screw Terminals  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC / DC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 10 Days  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 95 $63.00 7 AME-1950-4-B-A-AO Ametek Gemco Switch 1950  Part 1950-4-B-A-AO  19504BAAO  19504BAA0  1950 = Precision, Snap Action, Switch Assembly  4 = Double Pole Double Throw / D.P.D.T.  Eight Screw Terminals, can be wired for Normally Open or   Normally Close Circuits  Side "A" Normally Open Terminals  Side "B" Normally Closed Terminals  B = Binder / Screw Terminals, Qty., 8  A = Front Mounting  AO = Switch Plunger operated via a cam or a roller follower  U.L. Listed, 15 AMPS, 110 - 600 Volts AC  -50 to 185 Degree F  Recommended replacement @ 15 million cycles  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2025  (1LB) H 4" L 5" W 4" Box 0 $123.00 1980 Rotating Cam Limit Switch No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-1980-101-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-101-D-DP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $971.00 2 AME-1980-101-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-101-D-SP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" 0 $919.00 3 AME-1980-101-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-101-L-DP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $884.00 4 AME-1980-101-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-101-L-SP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $832.00 5 AME-1980-101-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-101-R-DP-X  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $884.00 6 AME-1980-101-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-101-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  01 = 1 Independent Cam / Circuit / Switch   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  (10LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $832.00 7 AME-1980-101-X-DP-X-M-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-101-X-DP-X-M-3-R  Base Part Number:  1980-101, NEMA 1, Circuits: 1;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  3 - Gear Multiplier ratio 1:3  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,335.00 8 AME-1980-102-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-D-DP-X  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,117.00 9 AME-1980-102-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-D-SP-TD1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,310.00 10 AME-1980-102-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-D-SP-X  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,013.00 11 AME-1980-102-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-102-L-DP-X  Series 1980  1 = NEMA 1 Enclosure  02 = 2 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switch U.L. Listed   X = No Timing Dial or Dial Window is provided  3 Year Warranty  (11 LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,030.00 12 AME-1980-102-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-102-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuit  4 screw terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" 0 $926.00 13 AME-1980-102-R-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-102-R-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  2 = 2 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $939.60 14 AME-1980-102-R-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-102-R-DP-X  Series 1980  1 = NEMA 1 Enclosure  02 = 2 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switch U.L. Listed   X = No Timing Dial or Dial Window is provided  3 Year Warranty  (11LBS) H 12.00" L 10.00" W 8.00"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,030.00 15 AME-1980-102-R-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-R-SP-R-TD1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,255.00 16 AME-1980-102-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-R-SP-TD1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,223.00 17 AME-1980-102-R-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch  Part AME-1980-102-R-SP-TD4  NEMA 1 Enclosure  2 Circuit  Right Hand shaft Extension  SPDT Switches, Single Pole Double Throw  Timing Dial Labeled for CCW Rotation  [Amazon] Dated 1/17  (14LBS) H 8" L 18" W 12" Box  [1/2018]  [1/2018] 0 $1,223.00 18 AME-1980-102-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-102-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $926.00 19 AME-1980-102-X-DP-TD1-R-20-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-TD1-R-20-R1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,564.00 20 AME-1980-102-X-DP-X-R-30-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-30-L1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 21 AME-1980-102-X-DP-X-R-3-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-3-L1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 22 AME-1980-102-X-DP-X-R-50-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-50-R1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  50 - Right Angle Gear Reducer ratio 50:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 23 AME-1980-102-X-DP-X-R-5-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-5-L1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 24 AME-1980-102-X-DP-X-R-64-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-R-64-R1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  64 - Right Angle Gear Reducer ratio 64:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,267.00 25 AME-1980-102-X-DP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-S-5-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,481.00 26 AME-1980-102-X-DP-X-S-7-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-DP-X-S-7-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  7 - Straight Drive Gear Reducer ratio 7:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,481.00 27 AME-1980-102-X-SP-X-R-10-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-R-10-R2  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,163.00 28 AME-1980-102-X-SP-X-R-32-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-102-X-SP-X-R-32-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  2 = 2 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  32 = 32 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,163.00 29 AME-1980-102-X-SP-X-R-4-L6 Ametek Gemco Rotating Cam Limit Switch Model 1980-102-X-SP-X-R4-L6  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  2 = 2 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  4 = 4 to 1 Gear Ratio  L6 = Left End Gear Reducer Shaft Location 6  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,529.28 30 AME-1980-102-X-SP-X-R-60-L1 Ametek Gemco 1980 Rotating Cam Limit Switch   Part 1980-102-X-SP-X-R-60-L1  1980102XSPXR60L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  02 = 2 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  60 = 60 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  Ships in 4 to 6 Weeks, Peck MI  Dated 07-2025  (14LBS) H 8" L 18" W 12" Box 0 $2,293.00 31 AME-1980-102-X-SP-X-R-6-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-R-6-L8  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,163.00 32 AME-1980-102-X-SP-X-R-7-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-R-7-L1  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,163.00 33 AME-1980-102-X-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-1-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 34 AME-1980-102-X-SP-X-S-20-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-20-L  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 35 AME-1980-102-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-20-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 36 AME-1980-102-X-SP-X-S-25-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-25-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  25 - Straight Drive Gear Reducer ratio 25:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 37 AME-1980-102-X-SP-X-S-400-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-400-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 38 AME-1980-102-X-SP-X-S-4-L Ametek Gemco Rotating Cam Limit Switch Model 1980-102-X-SP-X-S-4-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  2 = 2 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S= Straight Angle Gear Reducer  4 = 4 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,680.48 39 AME-1980-102-X-SP-X-S-7-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-102-X-SP-X-S-7-R  Base Part Number:  1980-102, NEMA 1, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  7 - Straight Drive Gear Reducer ratio 7:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,377.00 40 AME-1980-103-D-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-DP-R-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,308.00 41 AME-1980-103-D-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-DP-TD1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,557.00 42 AME-1980-103-D-DP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-103-D-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  03 = 3 Independent Circuits / Switches / Cams   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extensions from Enclosure, 2   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch, # 1950-4-B-A-AO  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter Clock Wise Rotation  3 Year Limited Warranty  (13LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,557.00 43 AME-1980-103-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-DP-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,260.00 44 AME-1980-103-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-SP-TD1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,401.00 45 AME-1980-103-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-D-SP-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,104.00 46 AME-1980-103-L-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (11LBS)  (14LBS) H 8.00" L 18.00" W 12.00"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $1,470.00 47 AME-1980-103-L-DP-TD2 Ametek Gemco Rotating Cam Limit Switch  Model 1980-103-L-DP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  8 screw terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for C.C.W. Rotation  3 Year Limited Warranty  Ships in 2 Weeks  Dated 1-19  (14LBS) H 8" L 18" W 12" Box 0 $1,470.00 48 AME-1980-103-L-DP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-L-DP-TD3  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,470.00 49 AME-1980-103-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,173.00 50 AME-1980-103-L-SPK-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-103-L-SPK-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SPK = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches   Which can be wired for either a N.O.or a N.C. Circuit.   With 4 Clamp Terminals per switch  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  [Amazon] 1/17  (12LBS) H 8" L 12" W 10" Box  [1/2018]  [1/2018] 0 $1,065.00 51 AME-1980-103-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-103-L-SP-TD1  1980103LSPTD1  1980 = Series Rotating Cam Limit Switch  1 = NEMA 1 Enclosure  03 = 3 Independent Circuits - Cam - Switches  L = Left Hand Shaft Extension  SP = S.P.D.T. Single Pole, Double Throw Snap Switches  TD1 = Timing Dial Installed, Labeled for CW Rotation, Mounting Horizontal  Ships in 10 Days, Peck MI  Dated 01-2020  (14LBS) H 8" L 18" W 12" Box 9 $1,314.00 52 AME-1980-103-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-103-L-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for C.C.W. Rotation  3 Year Limited Warranty (11LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,314.00 53 AME-1980-103-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-103-L-SP-X  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   1980 = Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per Switch  X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 2 Weeks  Dated 1-19  (14LBS) H 8" L 12" W 12" Box 0 $1,017.00 54 AME-1980-103-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-DP-R-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,221.00 55 AME-1980-103-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-DP-TD1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,470.00 56 AME-1980-103-R-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-DP-TD2  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,470.00 57 AME-1980-103-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-DP-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,173.00 58 AME-1980-103-R-SP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-SP-R-TD2  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,362.00 59 AME-1980-103-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-SP-R-X  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,065.00 60 AME-1980-103-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-103-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03= 3 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial Labeled for Clockwise Rotation  3 Year Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 3 $1,314.00 61 AME-1980-103-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-R-SP-TD2  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,314.00 62 AME-1980-103-R-SP-TD4 Ametek Gemco Rotating Cam Limit Switch Part 1980-103-R-SP-TD4  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03= 3 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD4 = Timing Dial, Counter Clockwise Rotation  (14LBS) H 8" L 18" W 12" Box  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,314.00 63 AME-1980-103-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-103-R-SP-X  aka 1980103RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The Micro-Adjust Cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees   1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams - Circuits - Switches   R = Right Hand Shaft Extension from Enclosure   SP = S.P.D.T. Switches - Single Pole Double Throw, Precision Snap Action  Gemco Mfg., UL Listed Switches Assembly File E56660   Which can be wired for either a N.O or a N.C. Circuit  4 screw terminals per switch  X = No other options  3 Year Limited Warranty  Normally a Stock Item @ BPI  Ships from Stock to 2 Weeks  Dated 10-2021  (14LBS) H 10" L 12" W 9" Box 0 $1,017.00 64 AME-1980-103-X-DP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-R-5-L7  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,410.00 65 AME-1980-103-X-DP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-R-5-R1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,410.00 66 AME-1980-103-X-DP-X-S-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-S-2-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,624.00 67 AME-1980-103-X-DP-X-S-32-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-S-32-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  32 - Straight Drive Gear Reducer ratio 32:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,624.00 68 AME-1980-103-X-DP-X-S-48-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-DP-X-S-48-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  48 - Straight Drive Gear Reducer ratio 48:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,624.00 69 AME-1980-103-X-SP-R-X-R-2-R5 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-R-X-R-2-R5  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  R5 - Right end position 5;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,302.00 70 AME-1980-103-X-SP-TD1-R-6-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TD1-R-6-R1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,551.00 71 AME-1980-103-X-SP-TD1-S-15-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TD1-S-15-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  15 - Straight Drive Gear Reducer ratio 15:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,765.00 72 AME-1980-103-X-SP-TD1-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TD1-S-24-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,765.00 73 AME-1980-103-X-SP-TD1-S-36-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TD1-S-36-L  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,765.00 74 AME-1980-103-X-SP-TW1-S-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-TW1-S-2-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TW1 - Timing Dial: CW Rotation, Mounting: Horizontal, Window;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,841.00 75 AME-1980-103-X-SP-X-R-4-R7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-R-4-R7  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R7 - Right end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,254.00 76 AME-1980-103-X-SP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-R-8-R1  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,254.00 77 AME-1980-103-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-10-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 78 AME-1980-103-X-SP-X-S-1-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-1-L  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 79 AME-1980-103-X-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-1-R  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 80 AME-1980-103-X-SP-X-S-200-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-200-L  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  200 - Straight Drive Gear Reducer ratio 200:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 81 AME-1980-103-X-SP-X-S-28-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-103-X-SP-X-S-28-L  Base Part Number:  1980-103, NEMA 1, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  28 - Straight Drive Gear Reducer ratio 28:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,468.00 82 AME-1980-104-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-104-D-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extensions from Enclosure, 2   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (13LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 2 $1,406.00 83 AME-1980-104-D-SP-R-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-D-SP-R-TD3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,559.00 84 AME-1980-104-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shafts Extending from Enclosure, 2  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,495.00 85 AME-1980-104-D-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-104-D-SP-X  1980104DSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Double, 2 Shaft Extensions from the enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 3 Weeks, Peck MI  Dated 01-2023 1 $1,198.00 86 AME-1980-104-L-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-L-DP-R-X  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,383.00 87 AME-1980-104-L-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-104-L-DP-TD1  1980104LDPTD1  1980 = Series  1 = NEMA 1  04 = 4 Circuits  L = Left Hand shaft Extension  DP = D.P.D.T. Switches, UL Listed  TD1 = Timing Dial, Labeled for CW Rotation  Ships in 2 Weeks, Peck MI  Dated 01-2021  (14LBS) H 8" L 14" W 12" Box 0 $1,616.00 88 AME-1980-104-L-DP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-104-L-DP-X  aka 1980104LDPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches   L = Left Hand Shaft Extension from Enclosure   DP = D.P.D.T. Switches / Double Pole Double Throw, Snap Action  Switches can be wired for N.O. or N.C. Circuits  8 Screw Terminals per Switch  Switch Part 1950-4-B-A-AO, UL Listed  X = No other options  3 Year Limited Warranty  Ships in 2 Weeks  Dated 1-19  (14LBS) H 8" L 18" W 12" Box 0 $1,319.00 89 AME-1980-104-L-SP-R-X Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-R-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,175.00 90 AME-1980-104-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for Clockwise Rotation  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 91 AME-1980-104-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-L-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter Clockwise Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 92 AME-1980-104-L-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-L-SP-TD3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 93 AME-1980-104-L-SP-TW1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-L-SP-TW1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TW1 - Timing Dial: CW Rotation, Mounting: Horizontal, Window;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,484.00 94 AME-1980-104-L-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-104-L-SP-X  1980104LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a Tool Supplied or by hand  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated 01-2024  (12LBS) H 8" L 12" W 10" Box 1 $1,111.00 95 AME-1980-104-R-DP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-DP-R-TD1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,680.00 96 AME-1980-104-R-DP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-DP-R-TD2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,680.00 97 AME-1980-104-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-DP-TD1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,616.00 98 AME-1980-104-R-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-DP-TD2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,616.00 99 AME-1980-104-R-DP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-104-R-DP-X  1980104RDPX  Series 1980 Cam Box featuring Cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams - Circuits - Switches   Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   DP = D.P.D.T. Switches - Double Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  8 Screw Terminals per switch  Switch Part 1950-4-B-A-A0  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No other options  3 Year Limited Warranty  Ships in 3 Weeks, Peck MI  Dated 01-2024  (14LBS) H 8" L 14" W 10" Box 0 $1,319.00 100 AME-1980-104-R-SPK-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-SPK-X  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SPK - SPDT with Clamp Terminal;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,175.00 101 AME-1980-104-R-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-SP-R-TD1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,472.00 102 AME-1980-104-R-SP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-SP-R-TD2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,472.00 103 AME-1980-104-R-SP-R-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-104-R-SP-R-X  1980104RSPRX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture & dust protection   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 3 Weeks, Peck MI  Dated 10-2021  (14LBS) H 8" L 14" W 12" Box 1 $1,175.00 104 AME-1980-104-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $1,408.00 105 AME-1980-104-R-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-R-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter C.W. Rotation  3 Year Limited Warranty  (10LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 106 AME-1980-104-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-R-SP-TD3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,408.00 107 AME-1980-104-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-104-R-SP-X  1980104RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied  and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty, FOB Peck MI  Normally a Stock Item @ BPI  Ships from Stock to 4 Weeks  Dated 01-2025  (12LBS) H 8" L 12" W 10" Box 2 $1,178.00 108 AME-1980-104-X-DP-R-TD1-R-20-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DPR-TD1-R-20-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DPR = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R = Right Angle Gear Reducer  20 = 20 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  3 to 4 Weeks to Ship  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,072.52 109 AME-1980-104-X-DP-R-TD1-R-24-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DPR-TD1-R24-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R = Right Angle Gear Reducer  24 = 24 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  3 to 4 Weeks to Ship  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $2,917.00 110 AME-1980-104-X-DP-R-TD1-R-30-L8 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DPR-TD1-R30-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R= Right Angle Gear Reducer  30 = 30 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  3 to 4 Weeks to Ship  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,072.52 111 AME-1980-104-X-DP-X-R-10-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-10-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 112 AME-1980-104-X-DP-X-R-16-L8 Ametek Gemco Rotating Cam Limit Switch  Part 1980-104-X-DP-X-R-16-L-8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  16 = 16 to 1 Gear Ratio  L8 = Left End Gear Reducer Shaft Location 8   (15LBS) H 8" L 18" W 12" Box  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 113 AME-1980-104-X-DP-X-R-16-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-16-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  16 - Right Angle Gear Reducer ratio 16:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 114 AME-1980-104-X-DP-X-R-18-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-18-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  18 - Right Angle Gear Reducer ratio 18:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 115 AME-1980-104-X-DP-X-R-1-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-1-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 116 AME-1980-104-X-DP-X-R-2.5-L2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-2.5-L2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2.5 - Right Angle Gear Reducer ratio 2.5:1  Shaft Location:  L2 - Left end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 117 AME-1980-104-X-DP-X-R-2.5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-2.5-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2.5 - Right Angle Gear Reducer ratio 2.5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 118 AME-1980-104-X-DP-X-R-2.5-R7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-2.5-R7  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2.5 - Right Angle Gear Reducer ratio 2.5:1  Shaft Location:  R7 - Right end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 119 AME-1980-104-X-DP-X-R-24-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-24-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  24 - Right Angle Gear Reducer ratio 24:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 120 AME-1980-104-X-DP-X-R-24-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-24-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  24 - Right Angle Gear Reducer ratio 24:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 121 AME-1980-104-X-DP-X-R-28-L8 Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-104-X-DP-X-R-28-L8  1980104XDPXR28L8  Base Part Number:  1980-104, NEMA 1, Circuits: 4  Shaft Extension:  X - No Shaft Extension Opposite Gear Box  Switch:  DP - Double Pole, Double Throw  Timing Dial and Mounting:  X - None  Gear Reducer:  R - Right Angle  Gear Reducer/Multiplier Code:  28 - Right Angle Gear Reducer Ratio 28:1  Shaft Location:  L8 - Left End Position 8  Ships in 4 to 6 Weeks, Peck MI  Dated 06-2025  (14LBS) H 8" L 18" W 12" Box 0 $2,709.00 122 AME-1980-104-X-DP-X-R-28-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-28-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  28 - Right Angle Gear Reducer ratio 28:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 123 AME-1980-104-X-DP-X-R-4-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-4-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 124 AME-1980-104-X-DP-X-R-5-L2 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-R-5-L-2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L2 = Left End Gear Reducer Shaft Location 2 (15LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 125 AME-1980-104-X-DP-X-R-5-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-R-5-L-7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7 / Bottom Left / Left End View  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 126 AME-1980-104-X-DP-X-R-6-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-6-R8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 127 AME-1980-104-X-DP-X-R-7-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-7-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 128 AME-1980-104-X-DP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-R-8-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,556.00 129 AME-1980-104-X-DP-X-S-1.33-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-1.33-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1.33 - Straight Drive Gear Reducer ratio 1.33:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 130 AME-1980-104-X-DP-X-S-1000-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-1000-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  1000 = 1000 to 1 Gear Ratio  R = Right End Gear Reducer Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,962.36 131 AME-1980-104-X-DP-X-S-10-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-10-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 132 AME-1980-104-X-DP-X-S-10-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-10-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  10 = 10 to 1 Gear Ratio  R = Right End Gear Reducer  (18LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 133 AME-1980-104-X-DP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-1-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 134 AME-1980-104-X-DP-X-S-20-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-20-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 135 AME-1980-104-X-DP-X-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-24-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 136 AME-1980-104-X-DP-X-S-25-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-25-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  25 - Straight Drive Gear Reducer ratio 25:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 137 AME-1980-104-X-DP-X-S-25-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-DP-X-S-25-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  25 = 25 to 1 Gear Ratio  R = Right End Gear Reducer  (18LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 138 AME-1980-104-X-DP-X-S-36-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-36-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 139 AME-1980-104-X-DP-X-S-3-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-3-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 140 AME-1980-104-X-DP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-3-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 141 AME-1980-104-X-DP-X-S-400-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-400-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 142 AME-1980-104-X-DP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-5-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 143 AME-1980-104-X-DP-X-S-6-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-6-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 144 AME-1980-104-X-DP-X-S-80-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-DP-X-S-80-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,770.00 145 AME-1980-104-X-SP-R-TD1-R-30-L8 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SPR-TD1-R30-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R= Right Angle Gear Reducer  25 = 25 to 1 Gear Ratio  L8 = Left End Gear Reducer Shaft Location 8  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,921.32 146 AME-1980-104-X-SP-R-TD1-S-1.5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-R-TD1-S-1.5-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1.5 - Straight Drive Gear Reducer ratio 1.5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,923.00 147 AME-1980-104-X-SP-R-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-R-X-S-10-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,626.00 148 AME-1980-104-X-SP-R-X-S-4-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-R-X-S-4-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,626.00 149 AME-1980-104-X-SP-TD1-R-1-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-TD1-R-1-L1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,645.00 150 AME-1980-104-X-SP-TD1-R-36-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-TD1-R-36-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  36 - Right Angle Gear Reducer ratio 36:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,645.00 151 AME-1980-104-X-SP-TD1-S-100-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-TD1-S-100-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial Labeled for Clock Wise Rotation  S = Straight Drive Gear Reducer  100 = 100 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 11 $2,020.68 152 AME-1980-104-X-SP-TD1-S-15-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-TD1-S-15-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  15 - Straight Drive Gear Reducer ratio 15:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,859.00 153 AME-1980-104-X-SP-TD1-S-50-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-TD1-S-50-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  50 - Straight Drive Gear Reducer ratio 50:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,859.00 154 AME-1980-104-X-SP-X-M-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-M-2-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  2 - Gear Multiplier ratio 1:2  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 155 AME-1980-104-X-SP-X-M-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-M-4-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  4 - Gear Multiplier ratio 1:4  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 156 AME-1980-104-X-SP-X-R-10-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-10-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 157 AME-1980-104-X-SP-X-R-12-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-12-L1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  12 - Right Angle Gear Reducer ratio 12:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 158 AME-1980-104-X-SP-X-R-15-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-15-L1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  15 - Right Angle Gear Reducer ratio 15:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 159 AME-1980-104-X-SP-X-R-16-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-16-L8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  16 - Right Angle Gear Reducer ratio 16:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 160 AME-1980-104-X-SP-X-R-1-L6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-1-L6  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L6 - Left end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 161 AME-1980-104-X-SP-X-R-1-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-1-L7  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 162 AME-1980-104-X-SP-X-R-1-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-1-R3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 163 AME-1980-104-X-SP-X-R-1-R5 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R1-R5  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  R5 = Right End Gear Reducer Shaft Location 5  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,659.96 164 AME-1980-104-X-SP-X-R-2-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-2-R3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 165 AME-1980-104-X-SP-X-R-30-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-30-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 166 AME-1980-104-X-SP-X-R-3-L6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-3-L6  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L6 - Left end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 167 AME-1980-104-X-SP-X-R-3-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-3-L7  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 168 AME-1980-104-X-SP-X-R-3-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-3-R3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 169 AME-1980-104-X-SP-X-R-4.75-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-4.75-L8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4.75 - Right Angle Gear Reducer ratio 4.75:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 170 AME-1980-104-X-SP-X-R-4.75-R8 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-4.75-R8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  4.75 = 4.75 to 1 Gear Ratio  R8 = Right End Gear Reducer Shaft Location 8  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,659.96 171 AME-1980-104-X-SP-X-R-400-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-400-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  400 = 400 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,659.96 172 AME-1980-104-X-SP-X-R-4-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-4-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  4 = 4 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,659.96 173 AME-1980-104-X-SP-X-R-4-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-4-L8  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 174 AME-1980-104-X-SP-X-R-4-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-4-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 175 AME-1980-104-X-SP-X-R-5-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-5-L1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 176 AME-1980-104-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-5-L7  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 177 AME-1980-104-X-SP-X-R-5-R1 Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-104-X-SP-X-R-5-R-1  1980104XSPXR5R1  1980 = Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Switch Settings 4 to 356 Degrees   Adjusted by use of a tool supplied and mounted inside the enclosure or by hand  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams - Circuits - Switches   X = No shaft extension opposite gearbox / no double shaft extension   SP = S.P.D.T. Switches - Single Pole Double Throw, Snap Action, U.L. Listed  which can be wired for either a N.O. or N.C. Circuits  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial is to be provided  R = Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R = Right End Gear Reducer   1 = Shaft Location 1  Ships 3 Weeks, Peck MI  Dated 01-2020  (14LBS) H 8" L 16" W 12" Box 0 $2,348.00 178 AME-1980-104-X-SP-X-R-5-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-5-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 179 AME-1980-104-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-5-R3  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 180 AME-1980-104-X-SP-X-R-7-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-R-7-L7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  7 = 7 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 181 AME-1980-104-X-SP-X-R-7-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-7-R2  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 182 AME-1980-104-X-SP-X-R-8-R1 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-104-X-SP-X-R-8-R1  1980 = 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  4 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  8 = 8 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  Ships in 3 to 4 Weeks, Peck MI  Dated 01-2021  (14LBS) H 8" L 18" W 12" Box 0 $2,348.00 183 AME-1980-104-X-SP-X-R-8-R6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-R-8-R6  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R6 - Right end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,348.00 184 AME-1980-104-X-SP-X-S-100-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-100-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  100 = 100 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $2,562.00 185 AME-1980-104-X-SP-X-S-10-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-10-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  10 = 10 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 186 AME-1980-104-X-SP-X-S-12-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-12-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 187 AME-1980-104-X-SP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-12-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 188 AME-1980-104-X-SP-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-14-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 189 AME-1980-104-X-SP-X-S-14-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-14-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 190 AME-1980-104-X-SP-X-S-16-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-16-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  16 - Straight Drive Gear Reducer ratio 16:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 191 AME-1980-104-X-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-1-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 192 AME-1980-104-X-SP-X-S-200-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-200-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  200 = 200 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 193 AME-1980-104-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-20-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 194 AME-1980-104-X-SP-X-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-24-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 195 AME-1980-104-X-SP-X-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-30-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  30 - Straight Drive Gear Reducer ratio 30:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 196 AME-1980-104-X-SP-X-S-400-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-400-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 197 AME-1980-104-X-SP-X-S-48-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-48-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  48 - Straight Drive Gear Reducer ratio 48:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 198 AME-1980-104-X-SP-X-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-5-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 199 AME-1980-104-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-5-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 200 AME-1980-104-X-SP-X-S-60-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-60-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 201 AME-1980-104-X-SP-X-S-6-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-6-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 202 AME-1980-104-X-SP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-6-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 203 AME-1980-104-X-SP-X-S-8-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-X-SP-X-S-8-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8 - Straight Drive Gear Reducer ratio 8:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,562.00 204 AME-1980-104-Y-DP-R-X-R-48-R2 Ametek Gemco Rotating Cam Limit Switch Model 1980-104-Y-DP-R-X-R48-R2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  04 = 4 Independent Cams / Circuits / Switches  Y = Shaft Extension Opposite the Gear Box, Dual Shaft  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  R = Rubber Boots on the switch plunger for additional dust & moisture protection   X = No Timing Dial  R = Right Angle Gear Reducer  48 = 48 to 1 Gear Ratio  R2 = Right End Gear Reducer Shaft Location 2 / Right Side Lower Postion / End View 1/15  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,707.00 205 AME-1980-104-Y-DP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-104-Y-DP-X-S-4-R  1980104YDPXS4R  1980-104, NEMA 1, Circuits: 4  Shaft Extension:  Y - Shaft Extension Opposite Gear Box  Switch:  DP - Double Pole, Double Throw  Timing Dial and Mounting:  X - None  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End  Ships in 3 Weeks  Dated 01-2020  (16LBS) H 8" L 18" W 12" 0 $2,857.00 206 AME-1980-104-Y-DP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-5-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,857.00 207 AME-1980-104-Y-DP-X-S-60-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-60-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,857.00 208 AME-1980-104-Y-DP-X-S-60-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-DP-X-S-60-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,857.00 209 AME-1980-104-Y-SP-X-R-1.5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-104-Y-SP-X-R-1.5-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1.5 - Right Angle Gear Reducer ratio 1.5:1  Shaft Location:  R1 - Right end position 1  Ships in 3 Weeks, Peck MI  Dated 1-20  (14LBS) H 8" L 18" W 12" Box 0 $2,435.00 210 AME-1980-104-Y-SP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-R-5-R1  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,435.00 211 AME-1980-104-Y-SP-X-S-1-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-S-1-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,649.00 212 AME-1980-104-Y-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-S-1-R  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,649.00 213 AME-1980-104-Y-SP-X-S-3-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-S-3-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,649.00 214 AME-1980-104-Y-SP-X-S-4-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-104-Y-SP-X-S-4-L  Base Part Number:  1980-104, NEMA 1, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,649.00 215 AME-1980-105-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-D-DP-X  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,925.00 216 AME-1980-105-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-D-SP-TD1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,962.00 217 AME-1980-105-L-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-L-DP-TD1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,135.00 218 AME-1980-105-L-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-L-DP-TD2  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,135.00 219 AME-1980-105-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-L-DP-X  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,838.00 220 AME-1980-105-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-105-L-SP-TD1  Series 1980  1 = NEMA 1 Enclosure  05 = 5 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw Snap Action Switches U.L. Listed  TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,875.00 221 AME-1980-105-L-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-105-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,578.00 222 AME-1980-105-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-R-DP-R-X  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,918.00 223 AME-1980-105-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-R-DP-TD1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,135.00 224 AME-1980-105-R-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  05 = 5 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch  X = No Timing Dial or Dial Window is provided  3 Year Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,838.00 225 AME-1980-105-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,875.00 226 AME-1980-105-R-SP-TW1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-R-SP-TW1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TW1 - Timing Dial: CW Rotation, Mounting: Horizontal, Window;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,951.00 227 AME-1980-105-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-105-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,578.00 228 AME-1980-105-X-DP-X-R-10-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-DP-X-R-10-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,075.00 229 AME-1980-105-X-DP-X-R-48-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-DP-X-R-48-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  48 - Right Angle Gear Reducer ratio 48:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,075.00 230 AME-1980-105-X-DP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-DP-X-R-5-R3  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,075.00 231 AME-1980-105-X-DP-X-R-7-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-DP-X-R-7-L1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,075.00 232 AME-1980-105-X-SP-R-X-S-28-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-R-X-S-28-L  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  28 - Straight Drive Gear Reducer ratio 28:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,109.00 233 AME-1980-105-X-SP-TD1-R-36-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-TD1-R-36-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  36 - Right Angle Gear Reducer ratio 36:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,112.00 234 AME-1980-105-X-SP-TD1-R-8-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-TD1-R-8-R4  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,112.00 235 AME-1980-105-X-SP-TD1-S-18-R Ametek Gemco Rotating Cam Limit Switch  Model AME-1980-105-X-SP-TD1-S-18-R  1980 = Series Cam Limit switch  1 = NEMA 1 Enclosure  05 = 5 Circuits / Switches / Cams  X = No Shaft Extension Opposite thee Gear Box  SP = SPDT, Single Pole Double Throw Switches  TD1 = Timing Dial labeled for Clock Wise Rotation  S = Straight Drive Gear Reducer   18 = 18 to 1 Gear Reducer Ratio  R = Right, Gear Reducer Mounted to the Right End  [Amazon] Dated 1/17  (4LBS) H 8" L 18" W 12" Box  [1/2018]  [1/2018] 0 $3,326.00 236 AME-1980-105-X-SP-TD1-S-50-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-TD1-S-50-R  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  50 - Straight Drive Gear Reducer ratio 50:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,326.00 237 AME-1980-105-X-SP-TD1-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-TD1-S-5-L  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,326.00 238 AME-1980-105-X-SP-X-R-10-L7 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-105-X-SP-X-R-10-L7  1980105XSPXR10L7  1980 = 1980 Series Cam Limit Switch  1 = NEMA 1 Enclosure  05 = 5 Independent circuits - Switches - Cams  X = No Shaft Extension Opposite Gear Box  SP = Single Pole, Double Throw  X = No Switch Options  R = Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  L = Left End Reducer & Shaft  7 = Shaft Position 7  Ships in 3 Weeks, Peck MI  Dated 01-01-2021  (14LBS) H 8" L 14" W 12" Box 0 $2,815.00 239 AME-1980-105-X-SP-X-R-10-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-R-10-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 240 AME-1980-105-X-SP-X-R-1-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-105-X-SP-X-R-1-L7  Series 1980  1 = NEMA 1 Enclosure  05 = 5 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw Precision Snap Action Switches  X = No Timing Dial  R= Right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 241 AME-1980-105-X-SP-X-R-1-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-R-1-R3  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 242 AME-1980-105-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-R-5-L7  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 243 AME-1980-105-X-SP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-R-8-R1  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,815.00 244 AME-1980-105-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-S-10-R  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,029.00 245 AME-1980-105-X-SP-X-S-14-R Ametek Gemco Rotating Cam Limit Switch Model 1980-105-X-SP-X-S-14-R  Series 1980  1 = NEMA 1 Enclosure  5 = 5 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw  X = No Timing Dial  S= Straight Drive Gear Reducer  14 = 14 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,029.00 246 AME-1980-105-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-X-SP-X-S-5-R  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,029.00 247 AME-1980-105-Y-SP-TD1-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-105-Y-SP-TD1-S-5-L  Base Part Number:  1980-105, NEMA 1, Circuits: 5;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,413.00 248 AME-1980-106-D-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-D-DP-TD1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,381.00 249 AME-1980-106-D-DP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-D-DP-TD3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,381.00 250 AME-1980-106-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-106-D-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual / Left & Right Hand Shaft Extensions from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   3 Year Limited Warranty (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,084.00 251 AME-1980-106-D-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-D-SP-R-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,868.00 252 AME-1980-106-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual / Left & Right Hand Shaft Extensions from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,069.00 253 AME-1980-106-D-SP-TD2 Ametek Gemco Rotating Cam Limit Switch  Model 1980-106-D-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shafts Extending from Enclosure, 2  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuit  4 screw terminals per switch  Switch Settings 4 to 356 Degrees  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter Clock Wise Rotation  3 Year Limited Warranty  Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $2,069.00 254 AME-1980-106-D-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-106-D-SP-X  aka 1980106DSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   D = Double Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuits  4 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  Ships in 2 Weeks  Dated 01-2023  (14LBS) H 8" L 18" W 12" Box 1 $1,772.00 255 AME-1980-106-L-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-L-DP-R-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,093.00 256 AME-1980-106-L-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-L-DP-TD2  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,294.00 257 AME-1980-106-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-106-R-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,997.00 258 AME-1980-106-L-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-L-SP-R-TD1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,078.00 259 AME-1980-106-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 260 AME-1980-106-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-L-SP-TD2  Series 1980  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD2 = Timing Dial Labeled for C.C.Wise Rotation  3 year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 261 AME-1980-106-L-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-L-SP-TD3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 262 AME-1980-106-L-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-106-L-SP-X  1980106LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The Micro-Adjust Cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O.or a N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial is to be provided  3 Year Limited Warranty  Ships in 6 Weeks, Peck MI  Dated 01-2023  (14LBS) H 8" L 14" W 8" Box 0 $1,685.00 263 AME-1980-106-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-DP-R-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,093.00 264 AME-1980-106-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-DP-TD1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,294.00 265 AME-1980-106-R-DP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-R-DP-TD2  Series 1980  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switches  TD2 = Timing Dial C.C.W. Counter Clock Wise Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,294.00 266 AME-1980-106-R-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-106-R-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,997.00 267 AME-1980-106-R-SPK-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-SPK-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SPK - SPDT with Clamp Terminal;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,781.00 268 AME-1980-106-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-SP-R-X  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,781.00 269 AME-1980-106-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch  Part 1980-106-R-SP-TD1  1980106RSPTD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Switch Settings 4 to 356 Degrees  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams - Circuits - Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches - Single Pole Double Throw, Snap Action, U.L. Listed Switches File E56660  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  Switch Part 1950-1-B-A-AO  TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty, Peck MI  Ships in 3 Weeks, Peck MI  Dated 10-2021  (14LBS) H 8" L 16" W 12" Box 0 $1,982.00 270 AME-1980-106-R-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-R-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for C.C.W. Rotation  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 271 AME-1980-106-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-R-SP-TD3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,982.00 272 AME-1980-106-R-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-106-R-SP-X  1980106RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The Micro-Adjust Cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or a N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial is to be provided  3 Year Limited Warranty  Normally a Stock Item @ BPI  Ships from Stock to 3 Weeks  Dated -1-2023  (14LBS) H 8" L 14" W 8" Box 0 $1,685.00 273 AME-1980-106-X-DP-X-R-20-L5 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-R-20-L5  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  L5 - Left end position 5;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,234.00 274 AME-1980-106-X-DP-X-R-5-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-R-5-L1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,234.00 275 AME-1980-106-X-DP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-R-5-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,234.00 276 AME-1980-106-X-DP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-R-5-R3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,234.00 277 AME-1980-106-X-DP-X-S-1-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-S-1-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 278 AME-1980-106-X-DP-X-S-1-R Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-DP-X-S-1-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch, 1950-4-B-A-A0  X = No Timing Dial  S= Straight Drive Gear Reducer  1 = 1 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 279 AME-1980-106-X-DP-X-S-2-R Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-DP-X-S-2-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  2 = 2 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 280 AME-1980-106-X-DP-X-S-4-R Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-DP-X-S-4-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  4 = 4 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 281 AME-1980-106-X-DP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-S-6-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 282 AME-1980-106-X-DP-X-S-80-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-DP-X-S-80-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,448.00 283 AME-1980-106-X-SP-R-TD1-R-30-L8 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SPR-TD1-R30-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Sheet Metal Cover  6 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch R = Rubber Boots on the Switch Plunger for additional dust & moisture protection  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R= Right Angle Gear Reducer  30 = 30 to 1 Gear Ratio  L8 = Left End Gear Reducer Shaft Location 8  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,315.00 284 AME-1980-106-X-SP-R-TD1-R-5-L1 Ametek Gemco RCLS NEMA 1 6 CIR LH SPDT SW W/BOOT TD1 & 5:1 RAGR L1 INPUT; Product line: 1980 Model  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,315.00 285 AME-1980-106-X-SP-R-X-S-28-L Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-R-X-S-28-L  Series 1980  1 = NEMA 1 Rated Enclosure  6 = 6 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection   X = No Timing Dial or Dial Window is to be provided  S= Straight Drive Gear Reducer  28 = 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,232.00 286 AME-1980-106-X-SP-R-X-S-32-L Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-R-X-S-32-L  Series 1980  1 = NEMA 1 Rated Enclosure  6 = 6 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection   X = No Timing Dial or Dial Window is to be provided  S= Straight Drive Gear Reducer  32 = 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,232.00 287 AME-1980-106-X-SP-TD1-R-30-L8 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-TD1-R30-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  6 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  R= Right Angle Gear Reducer  30 = 30 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,275.56 288 AME-1980-106-X-SP-TD2-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-TD2-S-24-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,433.00 289 AME-1980-106-X-SP-X-R-10-L8 Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-106-X-SP-X-R-10-L8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch, Switch Part 1950-1-B-A-AO  X = No Timing Dial   R= Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  L8 = Left End Gear Reducer Shaft Location 8  Ships in 3 Weeks, Peck MI  Dated 1-2020  (14LBS) H 8" L 18" W 12" Box 0 $2,405.16 290 AME-1980-106-X-SP-X-R-10-R2 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-106-X-SP-X-R-10-R2  1980106XSPXR10R2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree   Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuit.  4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  R2 = Right End Gear Reducer Shaft Location 2  Ships in 4 to 6 Weeks, Peck MI  Dated 01-2025  (14LBS) H 8" L 18" W 12" Box 0 $3,260.00 291 AME-1980-106-X-SP-X-R-1-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-1-L8  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 292 AME-1980-106-X-SP-X-R-1-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-1-R3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 293 AME-1980-106-X-SP-X-R-2-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-2-L7  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 294 AME-1980-106-X-SP-X-R-30-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-30-R2  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 295 AME-1980-106-X-SP-X-R-3-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-3-L7  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 296 AME-1980-106-X-SP-X-R-3-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-3-R3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 297 AME-1980-106-X-SP-X-R-4.75-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-4.75-R2  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4.75 - Right Angle Gear Reducer ratio 4.75:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 298 AME-1980-106-X-SP-X-R-40-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-40-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  40 - Right Angle Gear Reducer ratio 40:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 299 AME-1980-106-X-SP-X-R-5-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-X-R-5-L7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 300 AME-1980-106-X-SP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-5-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 301 AME-1980-106-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-5-R3  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 302 AME-1980-106-X-SP-X-R-6-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-6-L1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 303 AME-1980-106-X-SP-X-R-6-R4 Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-X-R6-R4  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  6 = 6 to 1 Gear Ratio  R4 = Right End Gear Reducer Shaft Location 4  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,066.04 304 AME-1980-106-X-SP-X-R-80-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-R-80-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  80 - Right Angle Gear Reducer ratio 80:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,922.00 305 AME-1980-106-X-SP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-12-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 306 AME-1980-106-X-SP-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-14-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 307 AME-1980-106-X-SP-X-S-15-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-15-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  15 - Straight Drive Gear Reducer ratio 15:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 308 AME-1980-106-X-SP-X-S-200-R Ametek Gemco Rotating Cam Limit Switch Model 1980-106-X-SP-X-S-200-R  Series 1980  1 = NEMA 1 Enclosure  6 = 6 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw  X = No Timing Dial  S= Straight Drive Gear Reducer  200 = 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 309 AME-1980-106-X-SP-X-S-20-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-20-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 310 AME-1980-106-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-20-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 311 AME-1980-106-X-SP-X-S-25-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-25-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  25 - Straight Drive Gear Reducer ratio 25:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 312 AME-1980-106-X-SP-X-S-35-L Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-35-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  35 = 35 to 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,217.24 313 AME-1980-106-X-SP-X-S-35-R Ametek Gemco Rotating Cam Limit Switch Model 1980-104-X-SP-X-S-35-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  06 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  35 = 35 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,217.24 314 AME-1980-106-X-SP-X-S-36-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-36-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 315 AME-1980-106-X-SP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-3-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 316 AME-1980-106-X-SP-X-S-400-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-400-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 317 AME-1980-106-X-SP-X-S-40-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-40-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 318 AME-1980-106-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-4-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 319 AME-1980-106-X-SP-X-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-5-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 320 AME-1980-106-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-5-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 321 AME-1980-106-X-SP-X-S-60-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-60-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 322 AME-1980-106-X-SP-X-S-8.5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-8.5-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8.5 - Straight Drive Gear Reducer ratio 8.5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 323 AME-1980-106-X-SP-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-80-R  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 324 AME-1980-106-X-SP-X-S-8-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-X-SP-X-S-8-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8 - Straight Drive Gear Reducer ratio 8:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,136.00 325 AME-1980-106-Y-DP-R-X-R-60-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-Y-DP-R-X-R-60-L1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  60 - Right Angle Gear Reducer ratio 60:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,417.00 326 AME-1980-106-Y-DP-R-X-R-60-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-Y-DP-R-X-R-60-R1  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  60 - Right Angle Gear Reducer ratio 60:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,417.00 327 AME-1980-106-Y-DP-R-X-S-500-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-106-Y-DP-R-X-S-500-L  Base Part Number:  1980-106, NEMA 1, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  500 - Straight Drive Gear Reducer ratio 500:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,631.00 328 AME-1980-106-Y-SP-R-X-S-28-L Ametek Gemco RCLS NEMA 1 6 CIR DBL SPDT SWW/BOOT/28:1 SDGR ON LH SIDE; Product line: 1980 Model  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,319.00 329 AME-1980-107-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-107-D-DP-X  Series 1980  1 = NEMA 1 Enclosure  07 = 7 Independent Cams / Circuits / Switches  D = Dual Shaft Extensions, Left and Right Extensions from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switches U.L. Listed  X = No Timing Dial or Dial Window is provided  3 Year Warranty (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,349.00 330 AME-1980-107-D-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-D-SP-R-X  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,097.00 331 AME-1980-107-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-D-SP-TD1  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,282.00 332 AME-1980-107-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-D-SP-X  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,985.00 333 AME-1980-107-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-L-DP-X  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,262.00 334 AME-1980-107-L-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-L-SP-TD2  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,195.00 335 AME-1980-107-L-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-L-SP-TD3  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,195.00 336 AME-1980-107-L-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-107-L-SP-X  Series 1980  1 = NEMA 1 Enclosure  7 = 7 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  X = No Timing Dial or Dial Window is provided  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,898.00 337 AME-1980-107-R-DP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-R-DP-TD4  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,559.00 338 AME-1980-107-R-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-107-R-DP-X  Series 1980  1 = NEMA 1 Enclosure  07 = 7 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw Snap Action Switches U.L. Listed  X = No Timing Dial or Dial Window is provided  3 Year Warranty  (14LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,262.00 339 AME-1980-107-R-SP-R-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-107-R-SP-R-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional moisture & dust   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,307.00 340 AME-1980-107-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-107-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  07 = 7 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial Labeled for C.W. Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,195.00 341 AME-1980-107-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-R-SP-TD2  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,195.00 342 AME-1980-107-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-107-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (16LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,898.00 343 AME-1980-107-X-DP-TD1-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-DP-TD1-S-6-R  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,010.00 344 AME-1980-107-X-SP-R-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-SP-R-X-S-6-R  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,461.00 345 AME-1980-107-X-SP-TD1-R-36-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-SP-TD1-R-36-R1  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  36 - Right Angle Gear Reducer ratio 36:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,432.00 346 AME-1980-107-X-SP-X-R-48-L2 Ametek Gemco Rotating Cam Limit Switch Model 1980-107-X-SP-X-R48-L2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Sheet Metal Enclosure  07 = 7 Independent Circuits / Cams / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  48 = 48 to 1 Gear Ratio  L2 = Left End, Shaft Position 2 (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,217.24 347 AME-1980-107-X-SP-X-R-7-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-SP-X-R-7-R1  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,135.00 348 AME-1980-107-X-SP-X-S-24-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-107-X-SP-X-S-24-L  Base Part Number:  1980-107, NEMA 1, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,349.00 349 AME-1980-107-X-SP-X-S-6-R Ametek Gemco Rotating Cam Limit Switch Model 1980-107-X-SP-X-S-6-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  07 = 7 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  6 = 6 to 1 Gear Ratio  R = Right End Gear Reducer  (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $3,349.00 350 AME-1980-108-D-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-D-DP-TD1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,921.00 351 AME-1980-108-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-D-DP-X  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,624.00 352 AME-1980-108-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-D-SP-TD1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,505.00 353 AME-1980-108-D-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-D-SP-TD4  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,505.00 354 AME-1980-108-D-SP-TW1 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-D-SP-TW1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  8 = 8 Independent Cams / Circuits / Switches   D = Double Shaft Extension, shafts exit from both ends of the enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TW1 = Timing Dial & Dial Window is to be provided Timing Dial Degrees Labeled for Clock Wise Rotation   3 Year Warranty  Dimensions, use a 9 to 12 circuit enclosure drawing   (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,769.04 355 AME-1980-108-D-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-108-D-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  8 = 8 Independent Cams / Circuits / Switches   D = Double Shaft Extension, shafts exit from both ends of the enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  (17LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,208.00 356 AME-1980-108-L-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-L-DP-TD2  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,834.00 357 AME-1980-108-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-L-DP-X  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,537.00 358 AME-1980-108-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-L-SP-TD1  Series 1980  1 = NEMA 1 Enclosure  08 = 8 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw Snap Action Switches U.L. Listed  TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 359 AME-1980-108-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-L-SP-TD2  Series 1980  1 = NEMA 1 Enclosure  8 = 8 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD2 = Timing Dial C.C.W. Counter Clock Wise Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 360 AME-1980-108-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-108-L-SP-X  1080108LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and  mounted inside the enclosure or by hand  1 = NEMA 1 Enclosure, Sheet Metal Cover  08 = 8 Independent Cams - Circuits - Switches   L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches - Single Pole Double Throw  Snap Action, U.L. Listed Switches  Can be wired for Normally Open or a Normally Closed Circuits  4 Screw Terminals per switch  UL Listed Assembly File E56660  X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 3 Weeks, Peck MI  Dated 10-2021  (14LBS) H 8" L 18" W 12" Box 0 $2,121.00 361 AME-1980-108-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-R-DP-R-X  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,665.00 362 AME-1980-108-R-DP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-108-R-DP-X  1980108RDPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied  and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees  1 = NEMA 1 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  8 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty, FOB Peck MI  Ships in 4 Weeks, Peck MI  Dated 01-2023  (12LBS) H 8" L 12" W 10" Box 0 $2,537.00 363 AME-1980-108-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-R-SP-R-X  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,249.00 364 AME-1980-108-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 =   3 Year Limited Warranty  (20LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 365 AME-1980-108-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-R-SP-TD2  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 366 AME-1980-108-R-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-R-SP-TD4  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,418.00 367 AME-1980-108-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-108-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   The Micro-Adjust Cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Precision Snap Action  Gemco Mfg., UL Listed Switches Assembly File E56660   Which can be wired for either a N.O or a N.C. Circuit  4 screw terminals per switch  Switch Settings 4 to 356 Degrees   X = No other options  3 Year Limited Warranty  [Amazon] Dated 1/17  (17LBS) H 6" L 16" W 8" Box  [1/2018]  [1/2018] 2 $2,121.00 368 AME-1980-108-X-DP-R-X-S-8-R Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-DP-R-X-S-8-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 08 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  R = Rubber Boot on switch plunger for moisture & dust protection   X = No Timing Dial  S= Straight Drive Gear Reducer  8 = 8 to 1 Gear Ratio  R = Right End Shaft Location  (21LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,116.00 369 AME-1980-108-X-DP-X-R-3-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-R-3-R1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,774.00 370 AME-1980-108-X-DP-X-R-6-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-R-6-R1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,774.00 371 AME-1980-108-X-DP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-S-3-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,988.00 372 AME-1980-108-X-DP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-S-4-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,988.00 373 AME-1980-108-X-DP-X-S-5-R Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-DP-X-S-5-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 8 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  5 = 5 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,826.36 374 AME-1980-108-X-DP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-DP-X-S-6-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,988.00 375 AME-1980-108-X-DP-X-S-8-R Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-DP-X-S-8-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 08 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  8 = 8 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,826.36 376 AME-1980-108-X-SP-TD1-S-18-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-TD1-S-18-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  18 - Straight Drive Gear Reducer ratio 18:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,869.00 377 AME-1980-108-X-SP-X-R-10-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-X-R-10-L1  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,358.00 378 AME-1980-108-X-SP-X-R-18-L6 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-SP-X-R18-L6  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  18 = 18 to 1 Gear Ratio  L6 = Left End Gear Reducer Shaft Location 6  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,372.76 379 AME-1980-108-X-SP-X-R-40-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-SP-X-R40-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R = Right Angle Gear Reducer  40 = 40 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,372.76 380 AME-1980-108-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-X-R-5-L7  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,358.00 381 AME-1980-108-X-SP-X-R-5-R3 Ametek Gemco Rotating Cam Limit Switch Model 1980-108-X-SP-X-R5-R3  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  8 = 8 Independent Cams / Circuits / Switches The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial is to be provided   R = Right Angle Drive Gear Reducer  5 = 5 to 1 Gear Ratio  R3 = Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,372.76 382 AME-1980-108-X-SP-X-S-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-X-S-2-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,572.00 383 AME-1980-108-X-SP-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-X-SP-X-S-80-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,572.00 384 AME-1980-108-Y-SP-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-Y-SP-X-S-1-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,659.00 385 AME-1980-108-Y-SP-X-S-5-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-Y-SP-X-S-5-L  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,659.00 386 AME-1980-108-Y-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-108-Y-SP-X-S-5-R  Base Part Number:  1980-108, NEMA 1, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,659.00 387 AME-1980-109-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-D-DP-X  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,340.00 388 AME-1980-109-D-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-109-D-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extensions from each end of the Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (21LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,872.00 389 AME-1980-109-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-L-DP-X  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,253.00 390 AME-1980-109-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-L-SP-X  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,785.00 391 AME-1980-109-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-R-DP-X  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,253.00 392 AME-1980-109-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-R-SP-TD1  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,082.00 393 AME-1980-109-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-109-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (21LBS)  (14LBS) H 8.00" L 18.00" W 12.00"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 9 $2,785.00 394 AME-1980-109-X-DP-X-R-14-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-109-X-DP-X-R-14-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  14 = 14 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,180.60 395 AME-1980-109-X-SP-TD1-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-109-X-SP-TD1-S-1-R  Base Part Number:  1980-109, NEMA 1, Circuits: 9;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,533.00 396 AME-1980-110-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-D-DP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,704.00 397 AME-1980-110-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-110-D-SP-TD1  Series 1980  1 = NEMA 1 Enclosure  10 = 10 Cams / Circuits / Switches  D = Double Shaft Extension (2) from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial Labeled for C.W. Rotation  (21LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,481.00 398 AME-1980-110-D-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-D-SP-TD2  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,481.00 399 AME-1980-110-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-D-SP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,184.00 400 AME-1980-110-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-L-DP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,617.00 401 AME-1980-110-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-L-SP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,097.00 402 AME-1980-110-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-R-DP-X  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,617.00 403 AME-1980-110-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-110-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  10 = 10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,394.00 404 AME-1980-110-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-R-SP-TD3  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,394.00 405 AME-1980-110-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-110-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  10 = 10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O or a N.C.Circuit  4 Screw Terminals per switch  Switch Settings 4 to 356 Degrees   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  [Amazon] Dated 1/17  (21LBS) H 8" L 18" W 12" Box  [1/2018]  [1/2018] 0 $3,097.00 406 AME-1980-110-X-SP-X-M-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-X-SP-X-M-5-R  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  5 - Gear Multiplier ratio 1:5  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,548.00 407 AME-1980-110-X-SP-X-R-100-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-X-SP-X-R-100-R1  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,334.00 408 AME-1980-110-X-SP-X-R-40-L6 Ametek Gemco Rotating Cam Limit Switch Model 1980-110-X-SP-X-R-40-L6  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  10 = 10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  40 = 40 to 1 Gear Ratio  L6 = Left End Gear Reducer Shaft Location 6  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,334.00 409 AME-1980-110-X-SP-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-110-X-SP-X-S-14-L  Base Part Number:  1980-110, NEMA 1, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,548.00 410 AME-1980-111-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-D-DP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,069.00 411 AME-1980-111-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-D-SP-TD1  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,794.00 412 AME-1980-111-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-D-SP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,497.00 413 AME-1980-111-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-L-DP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,982.00 414 AME-1980-111-L-SP-TD3 Ametek Gemco Rotating Cam Limit Switch Model 1980-111-L-SP-TD3  Series 1980  1 = NEMA 1 Enclosure  11 = 11 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD3 = Timing Dial Labeled Vertically  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,617.92 415 AME-1980-111-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-L-SP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,410.00 416 AME-1980-111-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-R-DP-X  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,982.00 417 AME-1980-111-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-111-R-SP-TD1  Series 1980  1 = NEMA 1 Enclosure  11= 11 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial Labeled for C.W. Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,707.00 418 AME-1980-111-R-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-111-R-SP-TD2  Series 1980  1 = NEMA 1 Enclosure  11= 11 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD2 = Timing Dial Labeled for C.C.W. Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,707.00 419 AME-1980-111-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-111-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Steel Fabricated Enclosure  11 = 11 Independent Circuits / Cams / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,410.00 420 AME-1980-111-X-SP-TD2-R-30-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-111-X-SP-TD2-R-30-R1  Base Part Number:  1980-111, NEMA 1, Circuits: 11;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  30 - Right Angle Gear Reducer ratio 30:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,944.00 421 AME-1980-112-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,436.00 422 AME-1980-112-D-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-SP-TD4  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,109.00 423 AME-1980-112-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-D-SP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,812.00 424 AME-1980-112-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-L-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,349.00 425 AME-1980-112-L-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-112-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,725.00 426 AME-1980-112-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-R-DP-X  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,349.00 427 AME-1980-112-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (29LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,022.00 428 AME-1980-112-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-R-SP-TD2  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,022.00 429 AME-1980-112-R-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-112-R-SP-X  1980112RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuits.  4 screw terminals per switch  X = No other options  3 Year Limited Warranty  Ships in 2 to 3 Weeks, Peck MI  Dated 01-2024 0 $3,725.00 430 AME-1980-112-X-DP-X-R-6-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-DP-X-R-6-R8  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,586.00 431 AME-1980-112-X-SP-R-X-R-1.5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-R-X-R-1.5-R1  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1.5 - Right Angle Gear Reducer ratio 1.5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,154.00 432 AME-1980-112-X-SP-R-X-S-6-R Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-R-X-S-6-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  R = Rubber Boot / Seal on the Switch Plunger for additional moisture or dust protection   X = No Timing Dial  S= Straight Drive Gear Reducer  6 = 6 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,368.00 433 AME-1980-112-X-SP-X-R-10-R4 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R10-R4  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure, Dust Tight  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  R4 = Right End Gear Reducer Shaft Location 4  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,506.76 434 AME-1980-112-X-SP-X-R-1-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-1-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial is to be provided  R= right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  L1 = Left End Shaft Location, Position 1  (36LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,506.76 435 AME-1980-112-X-SP-X-R-5-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-5-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial is to be provided  R= right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L1 = Left End Shaft Location, Position 1  (36LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,506.76 436 AME-1980-112-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-R-5-L7  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,962.00 437 AME-1980-112-X-SP-X-R-5-R7 Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-R-5-R7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure, Dust Tight  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R7 = Right End Gear Reducer Shaft Location 7 / Top of Gear Box / Left Side End View  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $4,962.00 438 AME-1980-112-X-SP-X-R-7-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-R-7-L7  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,962.00 439 AME-1980-112-X-SP-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-14-L  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 440 AME-1980-112-X-SP-X-S-4-R Ametek Gemco Rotating Cam Limit Switch Model 1980-112-X-SP-X-S-4-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S= Straight Drive Gear Reducer  4 = 4 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 441 AME-1980-112-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-5-R  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 442 AME-1980-112-X-SP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-6-R  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 443 AME-1980-112-X-SP-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-80-R  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 444 AME-1980-112-X-SP-X-S-8-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-112-X-SP-X-S-8-R  Base Part Number:  1980-112, NEMA 1, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8 - Straight Drive Gear Reducer ratio 8:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,176.00 445 AME-1980-112-Y-DP-X-S-10-L Ametek Gemco Rotating Cam Limit Switch Model 1980-112-Y-DP-X-S-10-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  12 = 12 Independent Cams / Circuits / Switches  Y = Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  10 = 10 to 1 Gear Ratio  L = Left End Gear Reducer  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,173.11 446 AME-1980-113-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-D-DP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,030.00 447 AME-1980-113-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-D-SP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,354.00 448 AME-1980-113-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-L-DP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,943.00 449 AME-1980-113-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-L-SP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,267.00 450 AME-1980-113-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-R-DP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,943.00 451 AME-1980-113-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-113-R-SP-X  Base Part Number:  1980-113, NEMA 1, Circuits: 13;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,267.00 452 AME-1980-114-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-D-DP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,268.00 453 AME-1980-114-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-D-SP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,540.00 454 AME-1980-114-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-L-DP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,181.00 455 AME-1980-114-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-L-SP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,453.00 456 AME-1980-114-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-R-DP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,181.00 457 AME-1980-114-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-R-SP-X  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,453.00 458 AME-1980-114-X-DP-X-R-5-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-X-DP-X-R-5-R8  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,418.00 459 AME-1980-114-X-SP-X-R-5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-X-SP-X-R-5-L7  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,690.00 460 AME-1980-114-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-114-X-SP-X-S-4-R  Base Part Number:  1980-114, NEMA 1, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,904.00 461 AME-1980-115-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-D-DP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,503.00 462 AME-1980-115-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch  Model 1980-115-D-SP-X  115 = NEMA 1, 15 Circuit  D = Double Ended  SP - S.P.D.T. Switches  X = Not other options  Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $4,723.00 463 AME-1980-115-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-L-DP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,416.00 464 AME-1980-115-L-SP-TD4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-L-SP-TD4  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD4 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,933.00 465 AME-1980-115-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-L-SP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,636.00 466 AME-1980-115-R-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-115-R-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Sheet Metal Enclosure   15 = 15 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch   TD1 = Timing Dial with Counter Clock Wise Labeled Dials  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,052.15 467 AME-1980-115-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-R-DP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,416.00 468 AME-1980-115-R-DP-X-R-6-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-R-DP-X-R-6-R8  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,717.43 469 AME-1980-115-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-R-SP-TD1  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,933.00 470 AME-1980-115-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-R-SP-X  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,636.00 471 AME-1980-115-X-DP-X-R-5-R8 Ametek Gemco Rotating Cam Limit Switch Model 1980-115-X-DP-X-R-5-R8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure, Dust Tight  15 = 15 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R8 = Right End Gear Reducer Shaft Location 8 / Top of Gear Box Right Side / Right Side End View  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,717.43 472 AME-1980-115-X-DP-X-R-6-R8 Ametek Gemco Rotating Cam Limit Switch Model 1980-115-X-DP-X-R6-R8  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  15 = 15 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  6 = 6 to 1 Gear Ratio  R8 = Right End Gear Reducer Shaft Location 8 (33LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,653.00 473 AME-1980-115-X-SP-TD1-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-X-SP-TD1-S-30-R  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  30 - Straight Drive Gear Reducer ratio 30:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,384.00 474 AME-1980-115-X-SP-TD1-S-50-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-115-X-SP-TD1-S-50-R  Base Part Number:  1980-115, NEMA 1, Circuits: 15;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  50 - Straight Drive Gear Reducer ratio 50:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,384.00 475 AME-1980-116-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-D-DP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,747.00 476 AME-1980-116-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-D-SP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,915.00 477 AME-1980-116-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-L-DP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,660.00 478 AME-1980-116-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-L-SP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,828.00 479 AME-1980-116-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-R-DP-X  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,660.00 480 AME-1980-116-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-116-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  16 = 16 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (30LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,828.00 481 AME-1980-116-X-DP-X-R-6-R8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-116-X-DP-X-R-6-R8  Base Part Number:  1980-116, NEMA 1, Circuits: 16;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R8 - Right end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,897.00 482 AME-1980-117-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-D-DP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,338.00 483 AME-1980-117-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-D-SP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,454.00 484 AME-1980-117-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-L-DP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,251.00 485 AME-1980-117-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-L-SP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,367.00 486 AME-1980-117-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-R-DP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,251.00 487 AME-1980-117-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-117-R-SP-X  Base Part Number:  1980-117, NEMA 1, Circuits: 17;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,367.00 488 AME-1980-118-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-D-DP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,578.00 489 AME-1980-118-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-D-SP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,642.00 490 AME-1980-118-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-L-DP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,491.00 491 AME-1980-118-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-118-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  018 = 18 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,852.00 492 AME-1980-118-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-L-SP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,555.00 493 AME-1980-118-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-R-DP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,491.00 494 AME-1980-118-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-118-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  018 = 18 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,852.00 495 AME-1980-118-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-118-R-SP-X  Base Part Number:  1980-118, NEMA 1, Circuits: 18;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,555.00 496 AME-1980-118-X-SP-TD1-S-1.5-L Ametek Gemco Rotating Cam Limit Switch Model 1980-118-X-SP-TD1-S-1.5-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  018 = 18 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  S = Straight Drive Gear Reducer  1.5 = 1 & 1/2 to 1 Gear Ratio  L = Gear Reducer & Shaft Extension on Left End  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $5,159.15 497 AME-1980-118-X-SP-TD1-S-1.5-R Ametek Gemco Rotating Cam Limit Switch Model 1980-118-X-SP-TD1-S-1.5-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  018 = 18 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  S = Straight Drive Gear Reducer  1.5 = 1 & 1/2 to 1 Gear Ratio  R = Gear Reducer & Shaft Extension on Right End  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $5,159.15 498 AME-1980-119-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-D-DP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,823.00 499 AME-1980-119-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-D-SP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,835.00 500 AME-1980-119-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-L-DP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,736.00 501 AME-1980-119-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-L-SP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,748.00 502 AME-1980-119-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-R-DP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,736.00 503 AME-1980-119-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-119-R-SP-X  Base Part Number:  1980-119, NEMA 1, Circuits: 19;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,748.00 504 AME-1980-1201-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-D-DP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,432.00 505 AME-1980-1201-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-D-SP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,380.00 506 AME-1980-1201-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-L-DP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,345.00 507 AME-1980-1201-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-L-SP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,293.00 508 AME-1980-1201-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-R-DP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,345.00 509 AME-1980-1201-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-R-SP-X  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,293.00 510 AME-1980-1201-X-SP-X-S-14-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1201-X-SP-X-S-14-R  Base Part Number:  1980-1201, NEMA 12, Circuits: 1;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,744.00 511 AME-1980-1201-X-SP-X-S-35-R Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1201-X-SP-X-S-10-R  19801201XSPXS10R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  12 = NEMA 12 Enclosure, Dust Tight  01 = 1 Independent Cams / Circuits / Switches   X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuit.  4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  10 = 10 to 1 Gear Ratio  R = Right End Shaft Location  Ships in 6 Weeks, Peck MI  Dated 01-2023  (14LBS) H 8" L 18" W 12" Box 0 $2,589.00 512 AME-1980-1202-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-D-DP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,591.00 513 AME-1980-1202-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-D-SP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,487.00 514 AME-1980-1202-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-L-DP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,504.00 515 AME-1980-1202-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-L-SP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,400.00 516 AME-1980-1202-R-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1202-R-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasket Cover, Dust Resistant   2 = 2 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  TD1 = Timing Dial with Counter Clock Wise Labeled Dials  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,274.40 517 AME-1980-1202-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-R-DP-X  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,504.00 518 AME-1980-1202-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1202-R-SP-TD1  Series 1980  12 = NEMA 12 Enclosure  02 = 2 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial C.W. Clock Wise Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,697.00 519 AME-1980-1202-R-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1202-R-SP-X  aka 19801202RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch, Switch Part 1950-1-B-A-AO, U.L. Listed Switches  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No other options  3 Year Limited Warranty  Ships in 10 Days, Peck MI  Dated 1-2020  (14LBS) H 8" L 18" W 12" Box 0 $1,400.00 520 AME-1980-1202-X-DP-X-R-60-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-DP-X-R-60-R1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  60 - Right Angle Gear Reducer ratio 60:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,741.00 521 AME-1980-1202-X-DP-X-S-2-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-DP-X-S-2-L  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,955.00 522 AME-1980-1202-X-SP-R-X-R-50-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-SP-R-X-R-50-R1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  50 - Right Angle Gear Reducer ratio 50:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,669.00 523 AME-1980-1202-X-SP-X-R-3-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-SP-X-R-3-L1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,637.00 524 AME-1980-1202-X-SP-X-R-4-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1202-X-SP-X-R4-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed Dust Tight  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  4 = 4 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,637.00 525 AME-1980-1202-X-SP-X-R-4-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-X-SP-X-R-4-R2  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,637.00 526 AME-1980-1202-X-SP-X-R-5-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1202-X-SP-X-R5-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed Dust Tight  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,637.00 527 AME-1980-1202-X-SP-X-S-30-R Ametek Gemco Rotating Cam Limit Switch  Model 1980-1202-X-SP-X-S-30-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  12 = NEMA 12 Enclosure, Dust Tight  02 = 2 Independent Cams / Circuits / Switches   Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuits  4 Screw Terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  30 = 30 to 1 Gear Ratio  R = Right End Shaft Location  [Updated 1-19]  (14LBS) H 8" L 18" W 12" Box 0 $2,851.00 528 AME-1980-1202-Y-DP-X-R-100-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-Y-DP-X-R-100-L1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,828.00 529 AME-1980-1202-Y-DP-X-R-100-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-Y-DP-X-R-100-R1  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,828.00 530 AME-1980-1202-Y-DP-X-S-100-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-Y-DP-X-S-100-L  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  100 - Straight Drive Gear Reducer ratio 100:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,042.00 531 AME-1980-1202-Y-DP-X-S-200-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1202-Y-DP-X-S-200-R  Base Part Number:  1980-1202, NEMA 12, Circuits: 2;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  200 - Straight Drive Gear Reducer ratio 200:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,042.00 532 AME-1980-1203-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-DP-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,748.00 533 AME-1980-1203-D-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-SP-R-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,640.00 534 AME-1980-1203-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-SP-TD1  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,889.00 535 AME-1980-1203-D-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-SP-TD3  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,889.00 536 AME-1980-1203-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-D-SP-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,592.00 537 AME-1980-1203-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-L-DP-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,661.00 538 AME-1980-1203-L-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-L-SP-TD1  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,802.00 539 AME-1980-1203-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-1203-L-SP-X  aka 19801203LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Enclosure, Dust Tight, Gasketed Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per Switch, Switch Part 1950-1-B-A-A-0   Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  3 Year Limited Warranty  Ships in 10 Days  Dated 1-2020  (14LBS) H 8" L 16" W 12" Box 1 $1,505.00 540 AME-1980-1203-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-R-DP-X  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,661.00 541 AME-1980-1203-R-SP-R-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1203-R-SP-R-TD1  Series 1980  12 = NEMA 12 Enclosure  03= 3 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw Snap Action Switches  R = Rubber Boot on Switch Plunger   TD1 = Timing Dial Clock Wise Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,850.00 542 AME-1980-1203-R-SP-R-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1203-R-SP-R-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  03 = Qty. 3, Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  R = Rubber Boot / Seal on the Switch Plunger for additional moisture protection  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,177.20 543 AME-1980-1203-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch  Model 1980-1203-R-SP-TD1  Series 1980  12 = NEMA 12 Enclosure  03 = 3 Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial C.W., Labeled for Clock Wise Rotation  [Amazon] Dated 1/17  (14LBS) H 8" L 18" W 12" Box  [1/2018]  [1/2018] 0 $1,802.00 544 AME-1980-1203-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-R-SP-TD2  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,802.00 545 AME-1980-1203-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-1203-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  03 = Qty. 3, Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  3 Year Limited Warranty, Peck MI  [Update 1/18]  (14LBS) H 8" L 14" W 8" Box 1 $1,505.00 546 AME-1980-1203-X-DP-R-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-DP-R-X-S-12-R  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,160.00 547 AME-1980-1203-X-DP-X-R-2-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-DP-X-R-2-R4  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,898.00 548 AME-1980-1203-X-DP-X-R-3-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-DP-X-R-3-R4  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,898.00 549 AME-1980-1203-X-SP-X-M-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-M-5-R  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  5 - Gear Multiplier ratio 1:5  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 550 AME-1980-1203-X-SP-X-R-10-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-R-10-R4  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,742.00 551 AME-1980-1203-X-SP-X-R-17-R1 Ametek Gemco Rotating Cam Limit Switch  Model 1980-1203-X-SP-X-R17-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  3 = 3 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  17 = 17 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  Dated 1/18  (14LBS) H 8" L 18" W 12" Box 1 $2,742.00 552 AME-1980-1203-X-SP-X-R-25-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-R-25-R4  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  25 - Right Angle Gear Reducer ratio 25:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,742.00 553 AME-1980-1203-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-R-5-R3  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,742.00 554 AME-1980-1203-X-SP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-R-8-R1  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,742.00 555 AME-1980-1203-X-SP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-3-R  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 556 AME-1980-1203-X-SP-X-S-60-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-60-L  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 557 AME-1980-1203-X-SP-X-S-60-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-60-R  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 558 AME-1980-1203-X-SP-X-S-64-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-64-L  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  64 - Straight Drive Gear Reducer ratio 64:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 559 AME-1980-1203-X-SP-X-S-80-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1203-X-SP-X-S-80-L  Base Part Number:  1980-1203, NEMA 12, Circuits: 3;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 560 AME-1980-1204-D-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-D-DP-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,247.00 561 AME-1980-1204-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-D-DP-X  Series 1980  12 = NEMA 12 Enclosure  4 = 4 Cams / Circuits / Switches  D = Double Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw  X = No Timing Dial or Dial Window is provided  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,950.00 562 AME-1980-1204-D-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-D-SP-R-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,103.00 563 AME-1980-1204-D-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-D-SP-R-X  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,806.00 564 AME-1980-1204-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  04 = 4 Independent Cams / Circuits / Switches  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure   D = Dual (2) Shaft Extensions from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 TD1 = Timing Dial C.W. Clock Wise Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $1,438.56 565 AME-1980-1204-D-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-D-SP-TD3  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,039.00 566 AME-1980-1204-D-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1204-D-SP-X  19801204DSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure. Dust Tight  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Double, 2 Shaft Extensions from the enclosure, @ each end  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty   Ships in 3 Weeks, Peck MI  Dated 01-2024  (14LBS) H 8" L 18" W 12" Box 0 $1,742.00 567 AME-1980-1204-L-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-DP-R-X  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,927.00 568 AME-1980-1204-L-DP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-L-DP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Dust Tight  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for Counter Clock Wise Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,160.00 569 AME-1980-1204-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-L-DP-X  Series 1980  12 = NEMA 12 Enclosure  4 = 4 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw  X = No Timing Dial or Dial Window is provided  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,863.00 570 AME-1980-1204-L-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-R-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,016.00 571 AME-1980-1204-L-SP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-R-TD2  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,016.00 572 AME-1980-1204-L-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-R-X  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,719.00 573 AME-1980-1204-L-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 574 AME-1980-1204-L-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-L-SP-TD3  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 575 AME-1980-1204-L-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-1204-L-SP-X  19801204LSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   L = Left Hand Shaft Extension from Enclosure   SP = S.P.D.T. Switches - Single Pole Double Throw, Snap Action  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  Switch Part 1950-1-B-A-AO  X = No other options  3 Year Limited Warranty  Ships from Stock to 4 Weeks  Dated 01-2023  (19LBS) H 8" L 18" W 12" Box 0 $1,655.00 576 AME-1980-1204-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-DP-TD1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,160.00 577 AME-1980-1204-R-DP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-1204-R-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Enclosure, Dust Tight / Gasketed  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  8 screw terminals per switch, switch Part 1950-1-B-A-AO  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $1,863.00 578 AME-1980-1204-R-SP-R-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-SP-R-TD2  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,016.00 579 AME-1980-1204-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-SP-R-X  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,719.00 580 AME-1980-1204-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Dust Tight  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 581 AME-1980-1204-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-SP-TD2  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 582 AME-1980-1204-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-R-SP-TD3  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $1,952.00 583 AME-1980-1204-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-1204-R-SP-X  aka 19801204RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Switch can be wired for either a N.O or N.C. Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No other options  3 Year Limited Warranty, Peck MI  Normally a Stock Item @ BPI  Ships from Stock to 4 Weeks  Dated 05-2025  (14LBS) H 8" L 18" W 12" Box 3 $1,754.00 584 AME-1980-1204-X-DP-R-X-R-20-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-R-X-R-20-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,164.00 585 AME-1980-1204-X-DP-R-X-S-100-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-R-X-S-100-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  100 - Straight Drive Gear Reducer ratio 100:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,378.00 586 AME-1980-1204-X-DP-R-X-S-40-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-R-X-S-40-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,378.00 587 AME-1980-1204-X-DP-X-R-1.5-R3 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1204-X-DP-X-R-1.5-R3  19801204XDPXR1.5R3  NEMA 12 Enclosure  4 Circuit  X - No Shaft Extension Opposite Gear Box  Switch:  DP - Double Pole, Double Throw  X - None  Gear Reducer  R - Right Angle  1.5 - Right Angle Gear Reducer ratio 1.5:1  R3 - Right End, Position 3  Ships in 6 Weeks, Peck MI  Dated 06-2022  (14LBS) H 8" L 18" W 12" Box 0 $3,100.00 588 AME-1980-1204-X-DP-X-R-12-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-R-12-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  12 - Right Angle Gear Reducer ratio 12:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,100.00 589 AME-1980-1204-X-DP-X-R-18-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-R-18-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  18 - Right Angle Gear Reducer ratio 18:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,100.00 590 AME-1980-1204-X-DP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-S-12-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,314.00 591 AME-1980-1204-X-DP-X-S-150-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-S-150-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  150 - Straight Drive Gear Reducer ratio 150:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,314.00 592 AME-1980-1204-X-DP-X-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-DP-X-S-24-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,314.00 593 AME-1980-1204-X-DP-X-S-80-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-DP-X-S-80-R  Series 1980   12 = NEMA 12 Enclosure  4 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches, Double Pole Double Throw  X = No Timing Dial  S = Straight Drive Gear Reducer  80 = 80 to 1 Gear Ratio  R = Right End Shaft Location  (24LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,314.00 594 AME-1980-1204-X-SP-R-X-R-10-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SPR-X-R-10-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dust Tight  04 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  R = Right Angle Drive Gear Reducer  10 = 10 to 1 Gear Ratio  L1 = Shaft Location, Left End, Shaft Position 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 595 AME-1980-1204-X-SP-R-X-R-14-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-R-14-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  14 - Right Angle Gear Reducer ratio 14:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,956.00 596 AME-1980-1204-X-SP-R-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-10-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 597 AME-1980-1204-X-SP-R-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-1-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 598 AME-1980-1204-X-SP-R-X-S-24-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-24-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 599 AME-1980-1204-X-SP-R-X-S-400-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-400-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 9 $3,170.00 600 AME-1980-1204-X-SP-R-X-S-8-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-R-X-S-8-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  8 - Straight Drive Gear Reducer ratio 8:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 601 AME-1980-1204-X-SP-TD1-R-100-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-R-100-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,189.00 602 AME-1980-1204-X-SP-TD1-R-10-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-R-10-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,189.00 603 AME-1980-1204-X-SP-TD1-R-8-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-R-8-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,189.00 604 AME-1980-1204-X-SP-TD1-S-16-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-S-16-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  16 - Straight Drive Gear Reducer ratio 16:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,403.00 605 AME-1980-1204-X-SP-TD1-S-600-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-S-600-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  600 - Straight Drive Gear Reducer ratio 600:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,403.00 606 AME-1980-1204-X-SP-TD1-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-TD1-S-6-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,403.00 607 AME-1980-1204-X-SP-X-R-1.25-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-1.25-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1.25 - Right Angle Gear Reducer ratio 1.25:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 608 AME-1980-1204-X-SP-X-R-100-R7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-100-R7  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  100 - Right Angle Gear Reducer ratio 100:1  Shaft Location:  R7 - Right end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 609 AME-1980-1204-X-SP-X-R-10-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-10-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 610 AME-1980-1204-X-SP-X-R-10-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-10-R2  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 611 AME-1980-1204-X-SP-X-R-10-R5 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-10-R5  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R5 - Right end position 5;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 612 AME-1980-1204-X-SP-X-R-15-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-15-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  15 - Right Angle Gear Reducer ratio 15:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 613 AME-1980-1204-X-SP-X-R-20-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-20-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 614 AME-1980-1204-X-SP-X-R-24-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-24-L8  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  24 - Right Angle Gear Reducer ratio 24:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 615 AME-1980-1204-X-SP-X-R-25-R6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-25-R6  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  25 - Right Angle Gear Reducer ratio 25:1  Shaft Location:  R6 - Right end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 616 AME-1980-1204-X-SP-X-R-36-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-R-36-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  4 = 4Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  36 = 36 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,042.28 617 AME-1980-1204-X-SP-X-R-4-L6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-4-L6  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  L6 - Left end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 618 AME-1980-1204-X-SP-X-R-4-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-4-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 619 AME-1980-1204-X-SP-X-R-4-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-4-R4  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 620 AME-1980-1204-X-SP-X-R-50-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-50-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  50 - Right Angle Gear Reducer ratio 50:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 621 AME-1980-1204-X-SP-X-R-5-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-R-5-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Watertight  04 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  R = Right Angle Drive Gear Reducer  5 = 5 to 1 Gear Ratio  L1 = Shaft Location, Left End, Shaft Position 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 622 AME-1980-1204-X-SP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-5-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 623 AME-1980-1204-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-5-R3  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 624 AME-1980-1204-X-SP-X-R-5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-5-R4  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 625 AME-1980-1204-X-SP-X-R-64-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-64-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  64 - Right Angle Gear Reducer ratio 64:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 626 AME-1980-1204-X-SP-X-R-6-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-6-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 627 AME-1980-1204-X-SP-X-R-6-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-R-6-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Watertight  04 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  R = Right Angle Drive Gear Reducer  6 = 6 to 1 Gear Ratio  R1 = Shaft Location, Right End, Shaft Position 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 628 AME-1980-1210-X-SP-X-R-4-R6 Ametek Gemco RCLS NEMA 12 10 CIR RH SPDT SW W/4:1 RAGR R6 INPUT; Product line: 1980 Model  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,005.00 629 AME-1980-1204-X-SP-X-R-7.5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-7.5-L7  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7.5 - Right Angle Gear Reducer ratio 7.5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 630 AME-1980-1204-X-SP-X-R-80-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-R-80-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  4 = 4Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  80 = 80 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 631 AME-1980-1204-X-SP-X-R-8-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-8-L1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 632 AME-1980-1204-X-SP-X-R-8-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-R-8-R1  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 633 AME-1980-1204-X-SP-X-R-8-R3 Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-R-8-R3  Series 1980   12 = NEMA 12 Enclosure  04 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw  X = No Timing Dial  R = Right Angle Drive Gear Reducer  8 = 8 to 1 Gear Ratio  R3 = Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,892.00 634 AME-1980-1204-X-SP-X-S-100-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-100-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  100 - Straight Drive Gear Reducer ratio 100:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 635 AME-1980-1204-X-SP-X-S-100-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-100-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  100 - Straight Drive Gear Reducer ratio 100:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 636 AME-1980-1204-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-10-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 637 AME-1980-1204-X-SP-X-S-12-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-12-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 638 AME-1980-1204-X-SP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch 1980  Part 1980-1204-X-SP-X-S-12-R  19801204XSPXS12R  1980- 1980 Series Can Limit Switch  12 - NEMA 12 Enclosure  04 - 4 Independent Circuits - Switches - Cams  X - No Shaft Extension Opposite Gear Box  SP - S.P.D.T., Single Pole, Double Throw  X - No other options  S - Straight Drive Gear Reducer  12 - 12 to 1 Gear Ratio  R - Straight Drive Gear Reducer Mounted Right End  Ships in 3 Weeks, Peck MI  Dated 01-2020  (14LBS) H 8" L 18" W 12" Box 0 $3,106.00 639 AME-1980-1204-X-SP-X-S-133-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-133-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  133 - Straight Drive Gear Reducer ratio 133:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 640 AME-1980-1204-X-SP-X-S-14-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-14-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 641 AME-1980-1204-X-SP-X-S-150-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-150-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  150 - Straight Drive Gear Reducer ratio 150:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 642 AME-1980-1204-X-SP-X-S-15-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-15-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  15 - Straight Drive Gear Reducer ratio 15:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 643 AME-1980-1204-X-SP-X-S-16-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-16-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  16 - Straight Drive Gear Reducer ratio 16:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 644 AME-1980-1204-X-SP-X-S-16-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-16-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  16 - Straight Drive Gear Reducer ratio 16:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 645 AME-1980-1204-X-SP-X-S-18-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-18-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  18 - Straight Drive Gear Reducer ratio 18:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 646 AME-1980-1204-X-SP-X-S-2.2-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-S-2.2-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  2.2 = 2.2 to 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 647 AME-1980-1204-X-SP-X-S-200-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-200-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  200 - Straight Drive Gear Reducer ratio 200:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 648 AME-1980-1204-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-20-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 649 AME-1980-1204-X-SP-X-S-25-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-S-25-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  04 = 4 Independent Circuits / Switches / Cams   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch, # 1950-1-B-A-AO  X = No Timing Dial  S = Straight Drive Gear Reducer  25 = 25 to 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,193.48 650 AME-1980-1204-X-SP-X-S-25-R Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1204-X-SP-X-S-25-R  19801204XSPXS25R  Series 1980   12 = NEMA 12 Enclosure  4 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Double Pole Double Throw  X = No Timing Dial  S = Straight Drive Gear Reducer  25 = 25 to 1 Gear Ratio  R = Right End Shaft Location  Ships in 6 to 8 Weeks, Peck MI  Dated 01-2023  (16LBS) H 8" L 18" W 12" Box 0 $3,106.00 651 AME-1980-1204-X-SP-X-S-287-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-287-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  287 - Straight Drive Gear Reducer ratio 287:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 652 AME-1980-1204-X-SP-X-S-2-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-2-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 653 AME-1980-1204-X-SP-X-S-300-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-300-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  300 - Straight Drive Gear Reducer ratio 300:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 654 AME-1980-1204-X-SP-X-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch 1980  Part 1980-1204-X-SP-X-S-30-R  19801204XSPXS30R  1980 = Cam Limit Switch  12 = NEMA 12  04 = 4 Independent Circuits, Switches & Cams  X = No Shaft Extension Opposite Gear Box  SP = S.P.D.T., Single Pole Double Throw Switches  X = No Timing Dial  S = Straight Drive Gear Reducer  30 = Reducer ratio 30:1  R = Reducer Mounted Right End  Ships in 4 to 5 Weeks, Peck MI  Dated 05-2025  (14LBS) H 8" L 18" W 12" Box 0 $3,292.00 655 AME-1980-1204-X-SP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-3-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 656 AME-1980-1204-X-SP-X-S-48-L Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1204-X-SP-X-S-48-L  19801204XSPXS48L  Series 1980 Cam Limit Switch   12 = NEMA 12 Enclosure  4 = 4 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Double Pole Double Throw  X = No Timing Dial  S = Straight Drive Gear Reducer  48 = 48 to 1 Gear Ratio  L = Right End Shaft Location  Ships in 8 to 10 Weeks, Peck MI  Dated 01-2023  (16LBS) H 8" L 18" W 12" Box 0 $3,106.00 657 AME-1980-1204-X-SP-X-S-4-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-S-4-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  4 = 4 to 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 658 AME-1980-1204-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-4-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 659 AME-1980-1204-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-5-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 660 AME-1980-1204-X-SP-X-S-64-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-64-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  64 - Straight Drive Gear Reducer ratio 64:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 661 AME-1980-1204-X-SP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-1204-X-SP-X-S-6-R  aka 19801204XSPXS6R  1980 = Series Cam Limit switch  12 = NEMA 12 Enclosure  04 = 4 Circuits/ Switches / Cams  X = No Shaft Extension Opposite Gear Box  SP = S.P.D.T., Single Pole Double Throw Switches  X = No Timing Dial  S = Straight Drive Gear Reducer  6 = 6 to 1 Gear Ratio  R = Right End Gear Reducer  Ships in 3 Weeks, Peck MI  Dated 1-19  (14LBS) H 8" L 18" W 12" Box 0 $3,106.00 662 AME-1980-1204-X-SP-X-S-7.25-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-7.25-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  7.25 - Straight Drive Gear Reducer ratio 7.25:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 663 AME-1980-1204-X-SP-X-S-7.5-R Ametek Gemco Rotating Cam Limit Switch 1980   Part 1980-1204-X-SP-X-S-7.5-R  19801204XSPXS7.5R  1204, NEMA 12, Circuits  X - No Shaft Extension Opposite Gear Box  SP - Single Pole, Double Throw  Timing Dial and Mounting:  X - None  S - Straight DriveGear Reducer  7.5 Gear Reducer Ratio  R - Straight Drive Gear Reducer Right End  Ships in 4 t0 5 Weeks, Peck MI  Date 01-2024  (14LBS) H 8" L 18" W 12" Box 0 $3,106.00 664 AME-1980-1204-X-SP-X-S-7-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-S-7-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  7 = 7 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 665 AME-1980-1204-X-SP-X-S-80-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-80-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 666 AME-1980-1204-X-SP-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-1204-X-SP-X-S-80-R  1980-1204, NEMA 12, Circuits: 4  X = No Shaft Extension Opposite Gear Box  SP = Single Pole, Double Throw Switches  X = No Timing Dial  S = Straight Drive Reducer  80 = 80 to 1 Gear Ratio  R = Straight Drive Gear Reducer Mounted on the Right End  Dated 1/18  Ships in 3 weeks, OH 44023  (14LBS) H 8" L 18" W 12" Box 0 $3,106.00 667 AME-1980-1204-X-SP-X-S-8-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-S-8-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  8 = 8 to 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 1 $3,106.00 668 AME-1980-1204-X-SP-X-S-8-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1204-X-SP-X-S-8-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  8 = 8 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 669 AME-1980-1204-X-SP-X-S-900-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-900-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  900 - Straight Drive Gear Reducer ratio 900:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 670 AME-1980-1204-X-SP-X-S-96-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-96-L  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  96 - Straight Drive Gear Reducer ratio 96:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 671 AME-1980-1204-X-SP-X-S-96-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-X-SP-X-S-96-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  96 - Straight Drive Gear Reducer ratio 96:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,106.00 672 AME-1980-1204-Y-DP-X-S-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-Y-DP-X-S-2-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,401.00 673 AME-1980-1204-Y-SP-X-S-500-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1204-Y-SP-X-S-500-R  Base Part Number:  1980-1204, NEMA 12, Circuits: 4;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  500 - Straight Drive Gear Reducer ratio 500:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,193.00 674 AME-1980-1205-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-D-DP-X  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,537.00 675 AME-1980-1205-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1205-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   D = Double Shaft Extension from enclosure, 2  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial Labeled for Clockwise Rotation, 0-360 Degrees  3 Year Limited Warranty  (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,574.00 676 AME-1980-1205-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-D-SP-X  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,277.00 677 AME-1980-1205-L-DP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-L-DP-R-TD1  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,827.00 678 AME-1980-1205-L-DP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-L-DP-TD2  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,747.00 679 AME-1980-1205-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-L-DP-X  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,450.00 680 AME-1980-1205-L-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-L-SP-R-X  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,270.00 681 AME-1980-1205-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1205-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from enclosure, 2  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660  TD1 = Timing Dial Labeled for C.W. Rotation   3 Year Limited Warranty  (24LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,487.00 682 AME-1980-1205-L-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-L-SP-TD2  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,487.00 683 AME-1980-1205-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-1205-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch, Switch Part 1950-1-B-A-AO  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No other options  3 Year Limited Warranty  Dated 1-19  (19LBS) H 8" L 20" W 12" Box 0 $2,190.00 684 AME-1980-1205-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-R-DP-X  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,450.00 685 AME-1980-1205-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1205-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from enclosure, 2  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660  TD1 = Timing Dial Labeled for C.W. Rotation   3 Year Limited Warranty  (24LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,487.00 686 AME-1980-1205-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-R-SP-TD2  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,487.00 687 AME-1980-1205-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1205-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  05 = 5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from enclosure, 2  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660  X = No Timing Dial   3 Year Limited Warranty  (22LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,190.00 688 AME-1980-1205-X-DP-X-S-6-R Ametek Gemco Cam Limit Switch 1980  Part 1980-1205-X-DP-X-S-6-R  19801205XDPXS6R  NEMA 12 Enclosure  5 Circuits - Switches - Cams  DP D.P.D.T. Snap Switches  Straight Drive Gear Reducer  6 to 1 Gear Ration  Shaft on Right End  Ships in 6 Weeks, Peck MI  Dated 08-2024 1 $3,798.34 689 AME-1980-1205-X-DP-X-R-14-R4 Ametek Gemco Rotating Cam Limit Switch Model 1980-1205-X-DP-X-R-14-R4  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, gasketed dust tight  05 = 5 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  14 = 14 to 1 Gear Ratio  R4 = Right End Gear Reducer Shaft Location 4  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,687.00 690 AME-1980-1205-X-DP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-DP-X-R-5-R3  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,687.00 691 AME-1980-1205-X-SP-TD1-R-1-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-TD1-R-1-L7  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,724.00 692 AME-1980-1205-X-SP-TD1-R-32-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-TD1-R-32-R1  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  32 - Right Angle Gear Reducer ratio 32:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,724.00 693 AME-1980-1205-X-SP-X-R-4-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-X-R-4-R1  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,427.00 694 AME-1980-1205-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-X-R-5-R3  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,427.00 695 AME-1980-1205-X-SP-X-R-5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-X-R-5-R4  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,427.00 696 AME-1980-1205-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-X-S-20-R  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,641.00 697 AME-1980-1205-X-SP-X-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-X-S-30-R  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  30 - Straight Drive Gear Reducer ratio 30:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,641.00 698 AME-1980-1205-X-SP-X-S-36-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-X-S-36-R  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,641.00 699 AME-1980-1205-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-X-S-4-R  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,641.00 700 AME-1980-1205-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-X-SP-X-S-5-R  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,641.00 701 AME-1980-1205-Y-DP-X-S-2-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-Y-DP-X-S-2-R  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2 - Straight Drive Gear Reducer ratio 2:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,988.00 702 AME-1980-1205-Y-SP-X-S-24-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1205-Y-SP-X-S-24-L  Base Part Number:  1980-1205, NEMA 12, Circuits: 5;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  24 - Straight Drive Gear Reducer ratio 24:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,728.00 703 AME-1980-1206-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-D-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  6 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed. Switches can be wired to be a Normally Open or Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (16LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,777.00 704 AME-1980-1206-D-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-D-SP-TD1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,762.00 705 AME-1980-1206-D-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-D-SP-TD2  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,762.00 706 AME-1980-1206-D-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-D-SP-TD3  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,762.00 707 AME-1980-1206-D-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-D-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual / Double Shaft, one out of each end of the enclosure  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  (24LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,465.00 708 AME-1980-1206-L-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-L-DP-TD1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,987.00 709 AME-1980-1206-L-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-L-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  (24LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,690.00 710 AME-1980-1206-L-SP-R-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-L-SP-R-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660  R = Rubber Boots on the Switch Plunger for additional dust & moisture protection   X = No Timing Dial or Dial Window is to be provided  3 Year Warranty (24LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,474.00 711 AME-1980-1206-L-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-1206-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuits  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches  UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in 2 Weeks, Peck MI  Dated 10-2021  (22LBS) H 8" L 18" W 12" Box 0 $2,378.00 712 AME-1980-1206-R-DP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-R-DP-R-X  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,786.00 713 AME-1980-1206-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-R-DP-X  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,690.00 714 AME-1980-1206-R-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-R-SP-R-TD1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $2,771.00 715 AME-1980-1206-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-R-SP-R-X  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,474.00 716 AME-1980-1206-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for Clock Wise Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,675.00 717 AME-1980-1206-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-R-SP-TD2  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,675.00 718 AME-1980-1206-R-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Model 1980-1206-R-SP-X  19801206RSPX  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed  06 = 6 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  X = No Timing Dial is provided  3 Year Warranty  Ships from Stock to 2 Weeks  Dated 01-2024  (22LBS) H 8" L 18" W 12" Box 0 $2,378.00 719 AME-1980-1206-X-DP-R-X-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-R-X-S-14-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,237.00 720 AME-1980-1206-X-DP-R-X-S-14-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-DP-R-X-S-14-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660  R = Rubber Boots on the switch plunger for additional moisture & dust protection   X = No Timing Dial  S = Straight Drive Gear Reducer  14 = 14 to 1 Gear Ratio  R = Right Side, Gear Box & Main Shaft  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,237.00 721 AME-1980-1206-X-DP-R-X-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-R-X-S-1-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,237.00 722 AME-1980-1206-X-DP-R-X-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-R-X-S-30-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  30 - Straight Drive Gear Reducer ratio 30:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,237.00 723 AME-1980-1206-X-DP-X-R-18-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-DP-X-R18-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  R = Right Angle Drive Gear Reducer  18 = 18 to 1 Gear Ratio  L1 = Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,927.00 724 AME-1980-1206-X-DP-X-R-18-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-X-R-18-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  18 - Right Angle Gear Reducer ratio 18:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,927.00 725 AME-1980-1206-X-DP-X-R-2.5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-X-R-2.5-L7  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2.5 - Right Angle Gear Reducer ratio 2.5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,927.00 726 AME-1980-1206-X-DP-X-R-20-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-DP-X-R20-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  R = Right Angle Drive Gear Reducer  20 = 20 to 1 Gear Ratio  L1 = Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,779.92 727 AME-1980-1206-X-DP-X-R-25-L8 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-X-R-25-L8  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  25 - Right Angle Gear Reducer ratio 25:1  Shaft Location:  L8 - Left end position 8;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,927.00 728 AME-1980-1206-X-DP-X-R-4-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-X-R-4-R3  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,927.00 729 AME-1980-1206-X-DP-X-R-5-R3 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1206-X-DP-X-R-5-R3  19801206XDPXR5R3  1980-1206, NEMA 12 Enclosure, 6 Circuits  X - No Shaft Extension Opposite Gear Box  DP - Double Pole, Double Throw Snap Switches  X - No Timing Dial  R - Right Angle Gear Reducer  5 - Reducer Ratio 5 to 1  R3 - Right End Shaft, Position 3  Ship in 6 Weeks, Peck MI  Dated 02-2022  (14LBS) H 8" L 18" W 12" Box 1 $3,927.00 730 AME-1980-1206-X-DP-X-R-6-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-X-R-6-R3  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,927.00 731 AME-1980-1206-X-DP-X-R-80-R5 Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-DP-X-R80-R5  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  R = Right Angle Drive Gear Reducer  80 = 80 to 1 Gear Ratio  R5 = Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,927.00 732 AME-1980-1206-X-DP-X-S-1.33-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-DP-X-S-1.33-L  Series 1980   12 = NEMA 12 Enclosure  6 = 6 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches, Double Pole Double Throw  X = No Timing Dial  S = Straight Drive Gear Reducer  1.33 = 1.33 to 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,389.00 733 AME-1980-1206-X-DP-X-S-1.33-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-DP-X-S-1.33-R  Series 1980   12 = NEMA 12 Enclosure  6 = 6 Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches, Double Pole Double Throw  X = No Timing Dial  S = Straight Drive Gear Reducer  1.33 = 1.33 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,141.00 734 AME-1980-1206-X-DP-X-S-35-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-X-S-35-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  35 - Straight Drive Gear Reducer ratio 35:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,141.00 735 AME-1980-1206-X-DP-X-S-36-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-DP-X-S-36-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 06 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  36 = 36 to 1 Gear Ratio  L = Left End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,141.00 736 AME-1980-1206-X-DP-X-S-3-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-X-S-3-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,141.00 737 AME-1980-1206-X-DP-X-S-80-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-DP-X-S-80-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  S = Straight Drive Gear Reducer, Parallel with main shaft  80 = 80 to 1 Gear Ratio  R = Gear Box & Main Shaft Right End  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,931.12 738 AME-1980-1206-X-DP-X-S-96-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-DP-X-S-96-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  96 - Straight Drive Gear Reducer ratio 96:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,141.00 739 AME-1980-1206-X-SP-R-TD1-S-18-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-R-TD1-S-18-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  18 - Straight Drive Gear Reducer ratio 18:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,222.00 740 AME-1980-1206-X-SP-R-TD1-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-R-TD1-S-20-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,222.00 741 AME-1980-1206-X-SP-R-X-R-10-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-R-X-R-10-R2  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  10 - Right Angle Gear Reducer ratio 10:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,711.00 742 AME-1980-1206-X-SP-R-X-R-16-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-R-X-R-16-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  16 - Right Angle Gear Reducer ratio 16:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,630.88 743 AME-1980-1206-X-SP-R-X-S-16-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-R-X-S-16-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gear box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot on the switch plunger for additional moisture protection  X = No Timing Dial or Dial Window is to be provided  S= Straight Drive Gear Reducer  16 = 16 to 1 Gear Ratio  L = Left End Gear Reducer  (28LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,925.00 744 AME-1980-1206-X-SP-R-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-R-X-S-20-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,925.00 745 AME-1980-1206-X-SP-R-X-S-400-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-R-X-S-400-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,925.00 746 AME-1980-1206-X-SP-R-X-S-600-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-R-X-S-600-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  600 - Straight Drive Gear Reducer ratio 600:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,925.00 747 AME-1980-1206-X-SP-R-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-R-X-S-80-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,925.00 748 AME-1980-1206-X-SP-TD1-S-25-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-TD1-S-25-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  TD1 = Timing Dial labeled for clock wise rotation  S = Straight Drive Gear Reducer  25 = 25 to 1 Gear Ratio  R = Right End Shaft Location  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" 0 $3,200.04 749 AME-1980-1206-X-SP-TD1-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch  Part AME-1980-1206-X-SP-R-TD1-R-6-R-3  Base Part Number:  1980-1206, NEMA 12 Enclosure with 6 Circuits  Shaft Extension:  X - No Shaft Extension Opposite Gear Box  Switch:  SP - Single Pole, Double Throw  Switch Option:  R - Rubber Boots for additional dust & moisture protection  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal  Gear Reducer:  R - Right Angle Drive   Gear Reducer Ratio:  6 - Gear Reducer Ratio 6 to 1  Shaft Location:  R - Gear Reducer Right End   Shaft Position:  3 = Shaft Position 3  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,126.00 750 AME-1980-1206-X-SP-TD3-R-6-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-TD3-R-6-R4  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,912.00 751 AME-1980-1206-X-SP-X-M-8-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-M-8-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  M - Multiplier Drive;  Gear Reducer/Multiplier Code:  8 - Gear Multiplier ratio 1:8  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 752 AME-1980-1206-X-SP-X-R-10-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-X-R-10-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  6 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  10 = 10 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 753 AME-1980-1206-X-SP-X-R-16-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-16-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  16 - Right Angle Gear Reducer ratio 16:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 754 AME-1980-1206-X-SP-X-R-1-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-1-L1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 755 AME-1980-1206-X-SP-X-R-20-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-20-R3  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  20 - Right Angle Gear Reducer ratio 20:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 756 AME-1980-1206-X-SP-X-R-25-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-25-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  25 - Right Angle Gear Reducer ratio 25:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 757 AME-1980-1206-X-SP-X-R-28-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-28-R4  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  28 - Right Angle Gear Reducer ratio 28:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 758 AME-1980-1206-X-SP-X-R-2-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-2-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2 - Right Angle Gear Reducer ratio 2:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 759 AME-1980-1206-X-SP-X-R-3-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-3-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  3 - Right Angle Gear Reducer ratio 3:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 760 AME-1980-1206-X-SP-X-R-4-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-4-R3  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 761 AME-1980-1206-X-SP-X-R-50-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-X-R-50-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  6 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  50 = 50 to 1 Gear Ratio  R1 = Right End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,553.12 762 AME-1980-1206-X-SP-X-R-5-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-X-R-5-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 763 AME-1980-1206-X-SP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-5-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 764 AME-1980-1206-X-SP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-5-R3  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 765 AME-1980-1206-X-SP-X-R-5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-5-R4  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 766 AME-1980-1206-X-SP-X-R-6-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-X-R-6-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  6 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  6 = 6 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,553.12 767 AME-1980-1206-X-SP-X-R-6-L5 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-6-L5  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  L5 - Left end position 5;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 768 AME-1980-1206-X-SP-X-R-6-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-6-L7  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 769 AME-1980-1206-X-SP-X-R-7.5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-7.5-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7.5 - Right Angle Gear Reducer ratio 7.5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 770 AME-1980-1206-X-SP-X-R-7-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-R-7-R1  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,615.00 771 AME-1980-1206-X-SP-X-S-100-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-100-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  100 - Straight Drive Gear Reducer ratio 100:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 772 AME-1980-1206-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-10-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 773 AME-1980-1206-X-SP-X-S-12-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-12-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 774 AME-1980-1206-X-SP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-12-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 775 AME-1980-1206-X-SP-X-S-14-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-14-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 776 AME-1980-1206-X-SP-X-S-15-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-S-15-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  S = Straight Drive Gear Reducer  15 = 15 to 1 Gear Ratio  R = Right End Shaft Location  (26LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 777 AME-1980-1206-X-SP-X-S-200-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-200-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  200 - Straight Drive Gear Reducer ratio 200:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 778 AME-1980-1206-X-SP-X-S-24-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-X-S-24-R   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell   12 = NEMA 12 Rated Enclosure   06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand   X = No Shaft Extension Opposite the Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch   X = No Timing Dial   S = Straight Drive Gear Reducer   24 = 24 to 1 Gear Ratio   R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,704.32 779 AME-1980-1206-X-SP-X-S-25-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-X-S-25-R   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell   12 = NEMA 12 Rated Enclosure   06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand   X = No Shaft Extension Opposite the Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch   X = No Timing Dial   S = Straight Drive Gear Reducer   25 = 25 to 1 Gear Ratio   R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 780 AME-1980-1206-X-SP-X-S-30-R Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1206-X-SP-X-S-30-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  30 = 30 to 1 Gear Ratio  R = Right End Shaft Location  Dated 10-2021  (18LBS) H 8" L 18" W 12" Box 0 $3,829.00 781 AME-1980-1206-X-SP-X-S-35-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-S-35-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed, Dust Tight  06 = 6 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  S = Straight Drive Gear Reducer  35 = 35 to 1 Gear Ratio  R = Right End Gear Box & Output Shaft Location  (26LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 782 AME-1980-1206-X-SP-X-S-36-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-36-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 783 AME-1980-1206-X-SP-X-S-36-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-36-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 784 AME-1980-1206-X-SP-X-S-3-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-3-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 785 AME-1980-1206-X-SP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-3-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 786 AME-1980-1206-X-SP-X-S-400-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-X-S400-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  400 = 400 to 1 Gear Ratio  L = Left End Shaft Location  [Amazon] 1/17  (14LBS) H 8" L 18" W 12" Box 11 $2,886.84 787 AME-1980-1206-X-SP-X-S-400-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-400-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  400 - Straight Drive Gear Reducer ratio 400:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 788 AME-1980-1206-X-SP-X-S-40-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-40-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 789 AME-1980-1206-X-SP-X-S-48-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-48-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  48 - Straight Drive Gear Reducer ratio 48:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 790 AME-1980-1206-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-4-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 791 AME-1980-1206-X-SP-X-S-5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-5-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  5 - Straight Drive Gear Reducer ratio 5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 792 AME-1980-1206-X-SP-X-S-60-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-60-L  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 793 AME-1980-1206-X-SP-X-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-6-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 794 AME-1980-1206-X-SP-X-S-80-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-X-SP-X-S-80-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  80 - Straight Drive Gear Reducer ratio 80:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 795 AME-1980-1206-X-SP-X-S-8-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-X-SP-X-S-8-R   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell   12 = NEMA 12 Rated Enclosure   06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand   X = No Shaft Extension Opposite the Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch   X = No Timing Dial   S = Straight Drive Gear Reducer   8 = 8 to 1 Gear Ratio   R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,829.00 796 AME-1980-1206-Y-DP-X-S-14-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-Y-DP-X-S-14-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,228.00 797 AME-1980-1206-Y-SP-TD1-S-2.5-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-Y-SP-TD1-S-2.5-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  2.5 - Straight Drive Gear Reducer ratio 2.5:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,213.00 798 AME-1980-1206-Y-SP-TD3-R-1-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-Y-SP-TD3-R-1-R3  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,999.00 799 AME-1980-1206-Y-SP-TD3-R-1-R5 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-Y-SP-TD3-R-1-R5  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R5 - Right end position 5;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,999.00 800 AME-1980-1206-Y-SP-X-S-12-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-Y-SP-X-S-12-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  12 - Straight Drive Gear Reducer ratio 12:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,916.00 801 AME-1980-1206-Y-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-Y-SP-X-S-20-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,916.00 802 AME-1980-1206-Y-SP-X-S-28-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-Y-SP-X-S-28-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  28 - Straight Drive Gear Reducer ratio 28:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,916.00 803 AME-1980-1206-Y-SP-X-S-35-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-Y-SP-X-S-35-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Y = No shaft extension opposite gear box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  S= Straight Drive Gear Reducer  35 = 35 to 1 Gear Ratio  R = Right End Gear Reducer  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,916.00 804 AME-1980-1206-Y-SP-X-S-40-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1206-Y-SP-X-S-40-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  06 = 6 Independent Cams / Circuits / Switches   Y = No shaft extension opposite gear box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches   X = No Timing Dial or Dial Window is to be provided  S= Straight Drive Gear Reducer  40 = 40 to 1 Gear Ratio  R = Right End Gear Reducer (29LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,916.00 805 AME-1980-1206-Y-SP-X-S-50-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1206-Y-SP-X-S-50-R  Base Part Number:  1980-1206, NEMA 12, Circuits: 6;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  50 - Straight Drive Gear Reducer ratio 50:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,916.00 806 AME-1980-1207-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-D-DP-X  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,017.00 807 AME-1980-1207-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1207-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  07 = 7 Independent Cams / Circuits / Switches  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure   D = Dual (2) Shaft Extensions from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial C.W. Clock Wise Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,043.36 808 AME-1980-1207-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-D-SP-X  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,653.00 809 AME-1980-1207-L-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1207-L-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Gasketed / Dust Tight  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,239.92 810 AME-1980-1207-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-L-DP-X  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,930.00 811 AME-1980-1207-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1207-L-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Gasketed / Dust Tight  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,863.00 812 AME-1980-1207-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-L-SP-X  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,566.00 813 AME-1980-1207-R-DP-R-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1207-R-DP-R-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure, Gasketed / Dust Tight  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boots on the switch plunger for additional dust & moisture protection   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,339.00 814 AME-1980-1207-R-DP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-R-DP-TD1  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,287.33 815 AME-1980-1207-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-R-DP-X  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,930.00 816 AME-1980-1207-R-SP-R-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-R-SP-R-TD1  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,975.00 817 AME-1980-1207-R-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1207-R-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  07 = 7 Independent Cams / Circuits / Switches  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure   R = Right Hand Shaft Extension from the enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial C.W. Clock Wise Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,863.00 818 AME-1980-1207-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-R-SP-TD2  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,863.00 819 AME-1980-1207-R-SP-TW2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-R-SP-TW2  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TW2 - Timing Dial: CCW Rotation, Window;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,939.00 820 AME-1980-1207-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1207-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  07 = 6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,566.00 821 AME-1980-1207-X-DP-TD1-R-64-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-X-DP-TD1-R-64-R2  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  64 - Right Angle Gear Reducer ratio 64:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,464.00 822 AME-1980-1207-X-SP-TD1-S-50-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-X-SP-TD1-S-50-L  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  50 - Straight Drive Gear Reducer ratio 50:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,314.00 823 AME-1980-1207-X-SP-TD1-S-6-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1207-X-SP-TD1-S-6-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed Dust Tight  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear B-ox  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  S= Straight Drive Gear Reducer  6 = 6 to 1 Gear Ratio  L = Left End Gear Reducer  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,314.00 824 AME-1980-1207-X-SP-X-R-12-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1207-X-SP-X-R-12-L1  Base Part Number:  1980-1207, NEMA 12, Circuits: 7;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  12 - Right Angle Gear Reducer ratio 12:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,803.00 825 AME-1980-1207-X-SP-X-S-25-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1207-X-SP-X-S25-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  07 = 7 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  25 = 25 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,784.24 826 AME-1980-1208-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-D-DP-X  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,257.00 827 AME-1980-1208-D-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-D-SP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  08 = 8 Independent Cams / Circuits / Switches  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure   D = Dual (2) Shaft Extensions from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial labeled for Clock Wise Rotation  3 Year Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,174.04 828 AME-1980-1208-D-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-D-SP-TD2  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,138.00 829 AME-1980-1208-D-SP-TD3 Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-D-SP-TD3  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  08 = 8 Independent Cams / Circuits / Switches  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure   D = Dual (2) Shaft Extensions from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD3 = Timing Dial labeled for Clock Wise Rotation with the main shaft vertical  3 Year Warranty  (32LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,138.00 830 AME-1980-1208-D-SP-X Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-1208-D-SP-X  19801208DSPX  Series 1980 Cam Box  Featuring Cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  12 = NEMA 12 Enclosure  08 = 8 Independent Cams - Circuits - Switches  The micro-adjust cams maintain an accuracy and repeatability  of 1/4 Degree.  Adjusted by use of a tool supplied and mounted inside the  enclosure or by hand.  D = Dual (2) Shaft Extensions from enclosure  SP = SPDT Switches / Single Pole Double Throw, Snap  Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C Circuit.  UL Listed Assembly File E56660  4 screw terminals per switch  Switch Part 1950-1-B-A-AO  X = No other options  3 Year Limited Warranty, MI  Ship in 4 Weeks, Peck MI  Dated 01-2023  (14LBS) H 8" L 18" W 12" Box  0 $2,841.00 831 AME-1980-1208-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-L-DP-X  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 832 AME-1980-1208-L-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-L-SP-R-X  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,882.00 833 AME-1980-1208-L-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-L-SP-TD2  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,051.00 834 AME-1980-1208-L-SP-X Ametek Gemco Rotating Cam Limit Switch  Part 1980-1208-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  08 = 8 Independent Circuits - Switches - Cams  L = Left Hand Shaft Extension from enclosure   SP = S.P.D.T. Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  Switch Part 1950-1-B-A-AO U.L. Listed Switch  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  Ships in 2 Weeks  Dated 1-19  (14LBS) H 8" L 18" W 12" Box 0 $2,754.00 835 AME-1980-1208-R-DP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-R-DP-TD1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch # 1950-4-B-A-AO  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for C.W. Rotation  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $2,407.32 836 AME-1980-1208-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-R-DP-X  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,170.00 837 AME-1980-1208-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-R-SP-R-X  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $2,882.00 838 AME-1980-1208-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-R-SP-TD1  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,051.00 839 AME-1980-1208-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-R-SP-TD2  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,051.00 840 AME-1980-1208-R-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-R-SP-TD3  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,051.00 841 AME-1980-1208-R-SP-X Ametek Gemco Rotating Cam Limit Switch  Model 1980-1208-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed  08 = 8 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action  U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 screw terminals per switch  X = No Timing Dial or Dial Window is to be provided  3 Year Warranty  Dated 1/18  Mfg Peck MI  Ship in 2 weeks, OH 44023   (26LBS) H 8" L 18" W 12" Box 1 $2,754.00 842 AME-1980-1208-X-DP-X-R-40-R6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-DP-X-R-40-R6  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  40 - Right Angle Gear Reducer ratio 40:1  Shaft Location:  R6 - Right end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,407.00 843 AME-1980-1208-X-DP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-DP-X-R-5-R3  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,407.00 844 AME-1980-1208-X-DP-X-S-40-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-DP-X-S-40-L  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,621.00 845 AME-1980-1208-X-DP-X-S-40-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-DP-X-S-40-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,621.00 846 AME-1980-1208-X-SP-R-TD1-R-1-L6 Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-X-SP-TD1-R1-L6  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  08 = 08 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber boots on the Switch Plunger for additional protection for dust & moisture   TD1 = Timing Dial Labeled for Clockwise Rotation  R = Right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  L6 = Left End Shaft Location Position 6  (37LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,134.16 847 AME-1980-1208-X-SP-R-X-R-1-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-R-X-R-1-R2  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,119.00 848 AME-1980-1208-X-SP-R-X-S-28-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-R-X-S-28-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  28 - Straight Drive Gear Reducer ratio 28:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,333.00 849 AME-1980-1208-X-SP-TD1-R-1-L6 Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-X-SP-TD1-R1-L6  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed / Dust Tight  08 = 08 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for Clockwise Rotation  R = Right Angle Gear Reducer  1 = 1 to 1 Gear Ratio  L6 = Left End Shaft Location Position 6  (37LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,030.48 850 AME-1980-1208-X-SP-TD1-S-14-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-X-SP-TD1-S-14-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  08 = 08 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial Labeled for Clockwise Rotation  S = Straight Drive Gear Reducer  14 = 14 to 1 Gear Ratio  L = Left End Shaft Location  (37LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,502.00 851 AME-1980-1208-X-SP-TW1-S-14-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-TW1-S-14-L  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TW1 - Timing Dial: CW Rotation, Mounting: Horizontal, Window;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  14 - Straight Drive Gear Reducer ratio 14:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,578.00 852 AME-1980-1208-X-SP-X-R-18-L4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-18-L4  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  18 - Right Angle Gear Reducer ratio 18:1  Shaft Location:  L4 - Left end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 853 AME-1980-1208-X-SP-X-R-18-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-X-SP-X-R-18-L7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  18 = 18 to 1 Gear Ratio  L7 = Left End Gear Reducer Shaft Location 7  (28LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 854 AME-1980-1208-X-SP-X-R-1-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-1-R3  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 855 AME-1980-1208-X-SP-X-R-2.5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-2.5-R1  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  2.5 - Right Angle Gear Reducer ratio 2.5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 856 AME-1980-1208-X-SP-X-R-25-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-X-SP-X-R-25-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial is to be provided   R = Right Angle Drive Gear Reducer  25 = 25 to 1 Gear Ratio  R1 = Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 857 AME-1980-1208-X-SP-X-R-5-R1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-X-SP-X-R5-R1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite Gear Box   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial is to be provided   R = Right Angle Drive Gear Reducer  5 = 5 to 1 Gear Ratio  R1 = Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 858 AME-1980-1208-X-SP-X-R-5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-5-R4  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 859 AME-1980-1208-X-SP-X-R-7.5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-7.5-R4  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7.5 - Right Angle Gear Reducer ratio 7.5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 860 AME-1980-1208-X-SP-X-R-7-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-7-L1  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 861 AME-1980-1208-X-SP-X-R-7-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-7-R1  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 862 AME-1980-1208-X-SP-X-R-80-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-80-R2  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  80 - Right Angle Gear Reducer ratio 80:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 863 AME-1980-1208-X-SP-X-R-8-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-R-8-R3  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,991.00 864 AME-1980-1208-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-S-10-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 865 AME-1980-1208-X-SP-X-S-12-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-X-SP-X-S12-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dust tight  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  12 = 12 to 1 Gear Ratio  R = Right End Gear Box & Main Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 866 AME-1980-1208-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-S-20-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 867 AME-1980-1208-X-SP-X-S-28-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-S-28-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  28 - Straight Drive Gear Reducer ratio 28:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 868 AME-1980-1208-X-SP-X-S-30-L Ametek Gemco Rotating Cam Limit Switch Model 1980-1208-X-SP-X-S-30-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dustight  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  30 = 30 to 1 Gear Ratio  L = Left End Shaft Location  (28LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 869 AME-1980-1208-X-SP-X-S-32-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-S-32-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  32 - Straight Drive Gear Reducer ratio 32:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 870 AME-1980-1208-X-SP-X-S-35-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-S-35-L  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  35 - Straight Drive Gear Reducer ratio 35:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 871 AME-1980-1208-X-SP-X-S-36-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-S-36-L  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  36 - Straight Drive Gear Reducer ratio 36:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 872 AME-1980-1208-X-SP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-S-3-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 873 AME-1980-1208-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-X-SP-X-S-4-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,205.00 874 AME-1980-1208-Y-SP-X-S-20-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-Y-SP-X-S-20-L  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,292.00 875 AME-1980-1208-Y-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-Y-SP-X-S-20-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,292.00 876 AME-1980-1208-Y-SP-X-S-40-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-Y-SP-X-S-40-L  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,292.00 877 AME-1980-1208-Y-SP-X-S-40-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1208-Y-SP-X-S-40-R  Base Part Number:  1980-1208, NEMA 12, Circuits: 8;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  40 - Straight Drive Gear Reducer ratio 40:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,292.00 878 AME-1980-1209-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1209-D-DP-X  Base Part Number:  1980-1209, NEMA 12, Circuits: 9;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,010.00 879 AME-1980-1209-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1209-D-SP-X  Base Part Number:  1980-1209, NEMA 12, Circuits: 9;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,542.00 880 AME-1980-1209-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1209-L-DP-X  Base Part Number:  1980-1209, NEMA 12, Circuits: 9;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,923.00 881 AME-1980-1209-L-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-1209-L-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for C.C.W. Rotation  3 Year Limited Warranty  (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,752.00 882 AME-1980-1209-L-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1209-L-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dustight  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,455.00 883 AME-1980-1209-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1209-R-DP-X  Base Part Number:  1980-1209, NEMA 12, Circuits: 9;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,923.00 884 AME-1980-1209-R-SP-TD2 Ametek Gemco Rotating Cam Limit Switch Model 1980-1209-R-SP-TD2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD2 = Timing Dial Labeled for C.C.W. Rotation  3 Year Limited Warranty (12LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,752.00 885 AME-1980-1209-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1209-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dustight  09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,455.00 886 AME-1980-1209-X-DP-X-R-7-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1209-X-DP-X-R-7-L7  Base Part Number:  1980-1209, NEMA 12, Circuits: 9;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,160.00 887 AME-1980-1209-X-DP-X-R-7-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1209-X-DP-X-R-7-R1  Base Part Number:  1980-1209, NEMA 12, Circuits: 9;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,160.00 888 AME-1980-1209-X-SP-TD1-R-1-L6 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1209-X-SP-TD1-R-1-L6  Base Part Number:  1980-1209, NEMA 12, Circuits: 9;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  L6 - Left end position 6;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,989.00 889 AME-1980-1209-X-SP-X-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1209-X-SP-X-S-30-R  Base Part Number:  1980-1209, NEMA 12, Circuits: 9;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  30 - Straight Drive Gear Reducer ratio 30:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,906.00 890 AME-1980-1209-X-SP-X-S-40-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1209-X-SP-X-S-40-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dust Tight with gasket   09 = 9 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  40 = 40 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,465.72 891 AME-1980-120-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-120-D-DP-X  Base Part Number:  1980-120, NEMA 1, Circuits: 20;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,060.00 892 AME-1980-120-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-120-D-SP-X  Base Part Number:  1980-120, NEMA 1, Circuits: 20;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,020.00 893 AME-1980-120-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-120-L-DP-X  Base Part Number:  1980-120, NEMA 1, Circuits: 20;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,973.00 894 AME-1980-120-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-120-L-SP-X  Base Part Number:  1980-120, NEMA 1, Circuits: 20;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,933.00 895 AME-1980-120-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-120-R-DP-X  Base Part Number:  1980-120, NEMA 1, Circuits: 20;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,973.00 896 AME-1980-120-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-120-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Enclosure  20 = 20 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,933.00 897 AME-1980-1210-D-DP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1210-D-DP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dust Tight  10 = 10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extensions from Enclosure, 2   DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,375.00 898 AME-1980-1210-D-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-D-SP-TD3  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,152.00 899 AME-1980-1210-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-D-SP-X  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,855.00 900 AME-1980-1210-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-L-DP-X  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,288.00 901 AME-1980-1210-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-L-SP-X  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,768.00 902 AME-1980-1210-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-R-DP-X  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,288.00 903 AME-1980-1210-R-SP-R-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1210-R-SP-R-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  10 = 10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660  R = Rubber Boots on the Snap Switch Plunger for additional Dust & Moisture Protection  X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,928.00 904 AME-1980-1210-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-R-SP-X  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $3,768.00 905 AME-1980-1210-X-DP-X-R-5-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-DP-X-R-5-R3  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,525.00 906 AME-1980-1210-X-DP-X-R-5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-DP-X-R-5-R4  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,525.00 907 AME-1980-1210-X-SP-R-X-R-7.5-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1210-X-SP-R-X-R-7.5-L1  Series 1980   12 = NEMA 12 Enclosure  10 = 10 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw Snap Switch U.L. Listed  R = Rubber Boot on Snap Switch Plunger  X = No Timing Dial  R = Right Angle Gear Reducer  7.5 = 7.5 to 1 Gear Ratio  L1 = Right End Shaft Location, Position 1  (34LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,165.00 908 AME-1980-1210-X-SP-TD1-S-1-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1210-Y-SP-TD1-S-1-R  Series 1980   12 = NEMA 12 Enclosure  10 = 10 Independent Cams / Circuits / Switches  Y = Shaft Extension Opposite the Gear Box  SP = SPDT Switches, Single Pole Double Throw Snap Switch U.L. Listed  TD1 = Timing Dial  S = Straight Gear Reducer  1 = 1 to 1 Gear Ratio  R = Right End Gear Reducer Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,896.63 909 AME-1980-1210-X-SP-X-R-15-R7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-SP-X-R-15-R7  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  15 - Right Angle Gear Reducer ratio 15:1  Shaft Location:  R7 - Right end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,005.00 910 AME-1980-1210-X-SP-X-R-40-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-SP-X-R-40-R2  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  40 - Right Angle Gear Reducer ratio 40:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,005.00 911 AME-1980-1210-X-SP-X-R-4-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-SP-X-R-4-R3  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  4 - Right Angle Gear Reducer ratio 4:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,005.00 912 AME-1980-1210-X-SP-X-R-5-R1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-SP-X-R-5-R1  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R1 - Right end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,005.00 913 AME-1980-1210-X-SP-X-R-5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-SP-X-R-5-R4  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,005.00 914 AME-1980-1210-X-SP-X-R-7-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-SP-X-R-7-L1  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7 - Right Angle Gear Reducer ratio 7:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,005.00 915 AME-1980-1210-X-SP-X-S-4-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-X-SP-X-S-4-R  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  4 - Straight Drive Gear Reducer ratio 4:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,219.00 916 AME-1980-1210-Y-DP-X-S-1-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1210-X-DP-X-S1-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  10 = 10 Independent Cams / Circuits / Switches  Y = Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  1 = 1 to 1 Gear Ratio  R = Right End Gear Reducer  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,126.67 917 AME-1980-1210-Y-SP-TD1-R-5-L1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-Y-SP-TD1-R-5-L1  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  L1 - Left end position 1;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,389.00 918 AME-1980-1210-Y-SP-TD1-S-1-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-Y-SP-TD1-S-1-R  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  1 - Straight Drive Gear Reducer ratio 1:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,603.00 919 AME-1980-1210-Y-SP-TD1-S-6-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1210-Y-SP-TD1-S-6-R  Base Part Number:  1980-1210, NEMA 12, Circuits: 10;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  6 - Straight Drive Gear Reducer ratio 6:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,603.00 920 AME-1980-1211-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-D-DP-X  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,743.00 921 AME-1980-1211-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-D-SP-X  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,171.00 922 AME-1980-1211-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-L-DP-X  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,656.00 923 AME-1980-1211-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1211-L-SP-TD1  Series 1980  12 = NEMA 12 Enclosure  11 = 11 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial C.W. Clock Wise Rotation  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,381.00 924 AME-1980-1211-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-L-SP-X  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,084.00 925 AME-1980-1211-L-SP-X-R-7-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1211-X-SP-X-R-7-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Dust Tight  11= 11 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  7 = 7 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,759.47 926 AME-1980-1211-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-R-DP-X  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,656.00 927 AME-1980-1211-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-R-SP-TD1  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,381.00 928 AME-1980-1211-R-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-R-SP-TD2  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,381.00 929 AME-1980-1211-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-R-SP-X  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,084.00 930 AME-1980-1211-Y-SP-TD1-S-200-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1211-Y-SP-TD1-S-200-R  Base Part Number:  1980-1211, NEMA 12, Circuits: 11;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  200 - Straight Drive Gear Reducer ratio 200:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,919.00 931 AME-1980-1212-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-D-DP-X  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,062.00 932 AME-1980-1212-D-SP-TD3 Ametek Gemco Rotating Cam Limit Switch Model 1980-1212-D-SP-TD3  Series 1980  12 = NEMA 12 Enclosure  12 = 12 Cams / Circuits / Switches  D = Double Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD3 = Timing Dial, Clock Wiser Rotation, Vertical Mounting  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,735.00 933 AME-1980-1212-D-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1212-D-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Dual Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (21LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,438.00 934 AME-1980-1212-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-L-DP-X  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,975.00 935 AME-1980-1212-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-L-SP-X  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,351.00 936 AME-1980-1212-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-R-DP-X  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,975.00 937 AME-1980-1212-R-SP-R-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-R-SP-R-X  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Switch Option:  R - Rubber Boot;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,543.00 938 AME-1980-1212-R-SP-TD1 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-R-SP-TD1  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD1 - Timing Dial: CW Rotation, Mounting: Horizontal;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,648.00 939 AME-1980-1212-R-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1212-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty (32LBS)  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,351.00 940 AME-1980-1212-X-DP-X-R-5-L1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1212-X-DP-X-R5-L1  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Gasketed, Enclosure for Dust & Moisture Protection  04 = 4 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Gear Reducer  5 = 5 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 2  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,402.07 941 AME-1980-1212-X-DP-X-R-5-R3 Ametek Gemco Rotating Cam Limit Switch Model 1980-1212-X-DP-X-R-5-R3  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R= Right Angle Precision Gear Reducer  5 = 5 to 1 Gear Ratio  R3 = Right End Gear Reducer Shaft Location 3  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,212.00 942 AME-1980-1212-X-DP-X-R-6-L7 Ametek Gemco Rotating Cam Limit Switch Model 1980-1212-X-DP-X-R-6-L7  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  12 = 12 Independent Cams / Circuits / Switches  X = No Shaft Extension Opposite the Gear Box  DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  X = No Timing Dial  R = Right Angle Gear Reducer  6 = 6 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,212.00 943 AME-1980-1212-X-DP-X-R-6-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-X-DP-X-R-6-R3  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,212.00 944 AME-1980-1212-X-DP-X-S-20-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-X-DP-X-S-20-L  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,426.00 945 AME-1980-1212-X-DP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-X-DP-X-S-20-R  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,426.00 946 AME-1980-1212-X-SP-X-R-15-R6 Ametek Gemco 1980 Rotating Cam Limit Switch  Part AME-1980-1212-X-SP-X-R-15-R-6  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  15 - Right Angle Gear Reducer ratio 15:1  Shaft Location:  R6 - Right end position 6;  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $5,588.00 947 AME-1980-1212-X-SP-X-R-7.5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch  Part 1980-1212-X-SP-X-R-7.5-L7  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7.5 - Right Angle Gear Reducer ratio 7.5:1  Shaft Location:  L7 - Left end position 7;  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $5,588.00 948 AME-1980-1212-X-SP-X-R-8-L7 Ametek Gemco 1980 Rotating Cam Limit Switch  Part AME-1980-1212-X-SP-X-R-8-L7  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  8 - Right Angle Gear Reducer ratio 8:1  Shaft Location:  L7 - Left end position 7;  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $5,588.00 949 AME-1980-1212-X-SP-X-S-10-L Ametek Gemco 1980 Rotating Cam Limit Switch  Part AME-1980-1212-X-SP-X-S-10-L  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  L - Straight Drive Gear Reducer Left End  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $5,802.00 950 AME-1980-1212-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch  Part AME-1980-1212-X-SP-X-S-10-R  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End  Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $5,802.00 951 AME-1980-1212-X-SP-X-S-30-R Ametek Gemco 1980 Rotating Cam Limit Switch  Part AME-1980-1212-X-SP-X-S-30-R  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  30 - Straight Drive Gear Reducer ratio 30:1  Shaft Location:  R - Straight Drive Gear Reducer Right End  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $5,802.00 952 AME-1980-1212-X-SP-X-S-3-R Ametek Gemco 1980 Rotating Cam Limit Switch  PartAME-1980-1212-X-SP-X-S-3-R  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  3 - Straight Drive Gear Reducer ratio 3:1  Shaft Location:  R - Straight Drive Gear Reducer Right End  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $5,802.00 953 AME-1980-1212-X-SP-X-S-5-L Ametek Gemco Rotating Cam Limit Switch  Model 1980-1212-X-SP-X-S-5-L  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings from 4 to 356 Degrees  12 = NEMA 12 Rated Enclosure, Gasketed Sheet Metal   12 = 12 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Main Shaft Opposite of the Gear Box. Single output shaft   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or a N.C. Circuit  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial  S = Straight Drive Gear Reducer  5 = 5 to 1 Gear Ratio  L = Left End Gear Reducer  3 Year Limited Warranty  [Amazon] Dated 1/18  (14LBS) H 8" L 18" W 12" Box 0 $5,802.00 954 AME-1980-1212-Y-SP-TD2-S-60-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-Y-SP-TD2-S-60-R  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,186.00 955 AME-1980-1212-Y-SP-X-S-60-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1212-Y-SP-X-S-60-R  Base Part Number:  1980-1212, NEMA 12, Circuits: 12;  Shaft Extension:  Y - Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  60 - Straight Drive Gear Reducer ratio 60:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,889.00 956 AME-1980-1213-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1213-D-DP-X  Base Part Number:  1980-1213, NEMA 12, Circuits: 13;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,698.00 957 AME-1980-1213-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1213-D-SP-X  Base Part Number:  1980-1213, NEMA 12, Circuits: 13;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,022.00 958 AME-1980-1213-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1213-L-DP-X  Base Part Number:  1980-1213, NEMA 12, Circuits: 13;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,611.00 959 AME-1980-1213-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1213-L-SP-X  Base Part Number:  1980-1213, NEMA 12, Circuits: 13;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,935.00 960 AME-1980-1213-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1213-R-DP-X  Base Part Number:  1980-1213, NEMA 12, Circuits: 13;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,611.00 961 AME-1980-1213-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1213-R-SP-X  Base Part Number:  1980-1213, NEMA 12, Circuits: 13;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $4,935.00 962 AME-1980-1214-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-D-DP-X  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,940.00 963 AME-1980-1214-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-D-SP-X  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,212.00 964 AME-1980-1214-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-L-DP-X  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,853.00 965 AME-1980-1214-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-L-SP-X  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,125.00 966 AME-1980-1214-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-R-DP-X  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,853.00 967 AME-1980-1214-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-R-SP-X  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,125.00 968 AME-1980-1214-X-DP-X-R-6-R3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-X-DP-X-R-6-R3  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  6 - Right Angle Gear Reducer ratio 6:1  Shaft Location:  R3 - Right end position 3;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,090.00 969 AME-1980-1214-X-SP-X-R-1-R7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-X-SP-X-R-1-R7  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  1 - Right Angle Gear Reducer ratio 1:1  Shaft Location:  R7 - Right end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,362.00 970 AME-1980-1214-X-SP-X-R-5-R4 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-X-SP-X-R-5-R4  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  5 - Right Angle Gear Reducer ratio 5:1  Shaft Location:  R4 - Right end position 4;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,362.00 971 AME-1980-1214-X-SP-X-R-80-R2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1214-X-SP-X-R-80-R2  Base Part Number:  1980-1214, NEMA 12, Circuits: 14;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  80 - Right Angle Gear Reducer ratio 80:1  Shaft Location:  R2 - Right end position 2;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,362.00 972 AME-1980-1214-X-SP-X-S-16-R Ametek Gemco Rotating Cam Limit Switch Model 1980-1214-X-SP-X-S16-R  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed Dust Tight  14 = 14 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No Shaft Extension Opposite the Gear Box  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  X = No Timing Dial  S = Straight Drive Gear Reducer  16 = 16 to 1 Gear Ratio  R = Right End Shaft Location  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,646.15 973 AME-1980-1215-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1215-D-DP-X  Base Part Number:  1980-1215, NEMA 12, Circuits: 15;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,178.00 974 AME-1980-1215-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1215-D-SP-X  Base Part Number:  1980-1215, NEMA 12, Circuits: 15;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,398.00 975 AME-1980-1215-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1215-L-DP-X  Base Part Number:  1980-1215, NEMA 12, Circuits: 15;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,091.00 976 AME-1980-1215-L-SP-TD1 Ametek Gemco Rotating Cam Limit Switch Model 1980-1215-L-SP-TD1  Series 1980  12 = NEMA 12 Enclosure  15 = 15 Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  TD1 = Timing Dial C.W. Clock Wise Rotation  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $3,961.43 977 AME-1980-1215-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1215-L-SP-X  Base Part Number:  1980-1215, NEMA 12, Circuits: 15;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,311.00 978 AME-1980-1215-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1215-R-DP-X  Base Part Number:  1980-1215, NEMA 12, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,091.00 979 AME-1980-1215-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1215-R-SP-X  Base Part Number:  1980-1215, NEMA 12, Circuits: 15;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,311.00 980 AME-1980-1216-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-D-DP-X  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,442.00 981 AME-1980-1216-D-SP-TD3 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-D-SP-TD3  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD3 - Timing Dial: CW Rotation, Mounting: Vertical;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,907.00 982 AME-1980-1216-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-D-SP-X  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,610.00 983 AME-1980-1216-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-L-DP-X  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,355.00 984 AME-1980-1216-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-L-SP-X  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,523.00 985 AME-1980-1216-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-R-DP-X  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,355.00 986 AME-1980-1216-R-SP-R-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1216-R-SP-R-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Rated Enclosure  16 = 16 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   R = Rubber Boot / Seal on the Switch Plunger for additional dust & moisture protection   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (50LBS)  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $4,504.67 987 AME-1980-1216-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-R-SP-X  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $5,523.00 988 AME-1980-1216-X-SP-X-R-7.5-L7 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-X-SP-X-R-7.5-L7  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  R - Right Angle;  Gear Reducer/Multiplier Code:  7.5 - Right Angle Gear Reducer ratio 7.5:1  Shaft Location:  L7 - Left end position 7;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,760.00 989 AME-1980-1216-X-SP-X-S-10-L Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-X-SP-X-S-10-L  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  L - Straight Drive Gear Reducer Left End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,974.00 990 AME-1980-1216-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-X-SP-X-S-10-R  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,974.00 991 AME-1980-1216-X-SP-X-S-20-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1216-X-SP-X-S-20-R  Base Part Number:  1980-1216, NEMA 12, Circuits: 16;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  20 - Straight Drive Gear Reducer ratio 20:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,974.00 992 AME-1980-1217-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1217-D-DP-X  Base Part Number:  1980-1217, NEMA 12, Circuits: 17;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,026.00 993 AME-1980-1217-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1217-D-SP-X  Base Part Number:  1980-1217, NEMA 12, Circuits: 17;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,142.00 994 AME-1980-1217-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1217-L-DP-X  Base Part Number:  1980-1217, NEMA 12, Circuits: 17;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,939.00 995 AME-1980-1217-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1217-L-SP-X  Base Part Number:  1980-1217, NEMA 12, Circuits: 17;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,055.00 996 AME-1980-1217-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1217-R-DP-X  Base Part Number:  1980-1217, NEMA 12, Circuits: 17;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,939.00 997 AME-1980-1217-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1217-R-SP-X  Base Part Number:  1980-1217, NEMA 12, Circuits: 17;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,055.00 998 AME-1980-1218-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1218-D-DP-X  Base Part Number:  1980-1218, NEMA 12, Circuits: 18;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,271.00 999 AME-1980-1218-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1218-D-SP-X  Base Part Number:  1980-1218, NEMA 12, Circuits: 18;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,335.00 1000 AME-1980-1218-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1218-L-DP-X  Base Part Number:  1980-1218, NEMA 12, Circuits: 18;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,184.00 1001 AME-1980-1218-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1218-L-SP-X  Base Part Number:  1980-1218, NEMA 12, Circuits: 18;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,248.00 1002 AME-1980-1218-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1218-R-DP-X  Base Part Number:  1980-1218, NEMA 12, Circuits: 18;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,184.00 1003 AME-1980-1218-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1218-R-SP-X  Base Part Number:  1980-1218, NEMA 12, Circuits: 18;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,248.00 1004 AME-1980-1219-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1219-D-DP-X  Base Part Number:  1980-1219, NEMA 12, Circuits: 19;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,510.00 1005 AME-1980-1219-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1219-D-SP-X  Base Part Number:  1980-1219, NEMA 12, Circuits: 19;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,522.00 1006 AME-1980-1219-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1219-L-DP-X  Base Part Number:  1980-1219, NEMA 12, Circuits: 19;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,423.00 1007 AME-1980-1219-L-SP-TD2 Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1219-L-SP-TD2  Base Part Number:  1980-1219, NEMA 12, Circuits: 19;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  TD2 - Timing Dial: CCW Rotation;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,732.00 1008 AME-1980-1219-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1219-L-SP-X  Base Part Number:  1980-1219, NEMA 12, Circuits: 19;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,435.00 1009 AME-1980-1219-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1219-R-DP-X  Base Part Number:  1980-1219, NEMA 12, Circuits: 19;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,423.00 1010 AME-1980-1219-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1219-R-SP-X  Base Part Number:  1980-1219, NEMA 12, Circuits: 19;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,435.00 1011 AME-1980-121-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-121-D-DP-X  Base Part Number:  1980-121, NEMA 1, Circuits: 21;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,657.00 1012 AME-1980-121-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-121-D-SP-X  Base Part Number:  1980-121, NEMA 1, Circuits: 21;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,565.00 1013 AME-1980-121-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-121-L-DP-X  Base Part Number:  1980-121, NEMA 1, Circuits: 21;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,570.00 1014 AME-1980-121-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-121-L-SP-X  Base Part Number:  1980-121, NEMA 1, Circuits: 21;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,478.00 1015 AME-1980-121-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-121-R-DP-X  Base Part Number:  1980-121, NEMA 1, Circuits: 21;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,570.00 1016 AME-1980-121-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-121-R-SP-X  Base Part Number:  1980-121, NEMA 1, Circuits: 21;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,478.00 1017 AME-1980-1220-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1220-D-DP-X  Base Part Number:  1980-1220, NEMA 12, Circuits: 20;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,751.00 1018 AME-1980-1220-D-SP-X Ametek Gemco Rotating Cam Limit Switch Model 1980-1220-D-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure. Dust Tight  20 = 20 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  D = Double, 2 Shaft Extensions from the enclosure, @ each end  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,711.00 1019 AME-1980-1220-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1220-L-DP-X  Base Part Number:  1980-1220, NEMA 12, Circuits: 20;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,664.00 1020 AME-1980-1220-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1220-L-SP-X  Base Part Number:  1980-1220, NEMA 12, Circuits: 20;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,624.00 1021 AME-1980-1220-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1220-R-DP-X  Base Part Number:  1980-1220, NEMA 12, Circuits: 20;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,664.00 1022 AME-1980-1220-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1220-R-SP-X  Base Part Number:  1980-1220, NEMA 12, Circuits: 20;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,624.00 1023 AME-1980-1220-X-SP-X-S-10-R Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1220-X-SP-X-S-10-R  Base Part Number:  1980-1220, NEMA 12, Circuits: 20;  Shaft Extension:  X - No Shaft Extension Opposite Gear Box;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  Gear Reducer:  S - Straight Drive;  Gear Reducer/Multiplier Code:  10 - Straight Drive Gear Reducer ratio 10:1  Shaft Location:  R - Straight Drive Gear Reducer Right End;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,075.00 1024 AME-1980-1221-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1221-D-DP-X  Base Part Number:  1980-1221, NEMA 12, Circuits: 21;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,340.00 1025 AME-1980-1221-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1221-D-SP-X  Base Part Number:  1980-1221, NEMA 12, Circuits: 21;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,248.00 1026 AME-1980-1221-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1221-L-DP-X  Base Part Number:  1980-1221, NEMA 12, Circuits: 21;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,253.00 1027 AME-1980-1221-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1221-L-SP-X  Base Part Number:  1980-1221, NEMA 12, Circuits: 21;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,161.00 1028 AME-1980-1221-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1221-R-DP-X  Base Part Number:  1980-1221, NEMA 12, Circuits: 21;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,253.00 1029 AME-1980-1221-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1221-R-SP-X  Base Part Number:  1980-1221, NEMA 12, Circuits: 21;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,161.00 1030 AME-1980-1222-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1222-D-DP-X  Base Part Number:  1980-1222, NEMA 12, Circuits: 22;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,580.00 1031 AME-1980-1222-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1222-D-SP-X  Base Part Number:  1980-1222, NEMA 12, Circuits: 22;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,436.00 1032 AME-1980-1222-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1222-L-DP-X  Base Part Number:  1980-1222, NEMA 12, Circuits: 22;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,493.00 1033 AME-1980-1222-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1222-L-SP-X  Base Part Number:  1980-1222, NEMA 12, Circuits: 22;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,349.00 1034 AME-1980-1222-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1222-R-DP-X  Base Part Number:  1980-1222, NEMA 12, Circuits: 22;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,493.00 1035 AME-1980-1222-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1222-R-SP-X  Base Part Number:  1980-1222, NEMA 12, Circuits: 22;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,349.00 1036 AME-1980-1223-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1223-D-DP-X  Base Part Number:  1980-1223, NEMA 12, Circuits: 23;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,829.00 1037 AME-1980-1223-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1223-D-SP-X  Base Part Number:  1980-1223, NEMA 12, Circuits: 23;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,633.00 1038 AME-1980-1223-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1223-L-DP-X  Base Part Number:  1980-1223, NEMA 12, Circuits: 23;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,742.00 1039 AME-1980-1223-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1223-L-SP-X  Base Part Number:  1980-1223, NEMA 12, Circuits: 23;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,546.00 1040 AME-1980-1223-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1223-R-DP-X  Base Part Number:  1980-1223, NEMA 12, Circuits: 23;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,742.00 1041 AME-1980-1223-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1223-R-SP-X  Base Part Number:  1980-1223, NEMA 12, Circuits: 23;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,546.00 1042 AME-1980-1224-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1224-D-DP-X  Base Part Number:  1980-1224, NEMA 12, Circuits: 24;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,069.00 1043 AME-1980-1224-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1224-D-SP-X  Base Part Number:  1980-1224, NEMA 12, Circuits: 24;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,821.00 1044 AME-1980-1224-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1224-L-DP-X  Base Part Number:  1980-1224, NEMA 12, Circuits: 24;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,982.00 1045 AME-1980-1224-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1224-L-SP-X  Base Part Number:  1980-1224, NEMA 12, Circuits: 24;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,734.00 1046 AME-1980-1224-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1224-R-DP-X  Base Part Number:  1980-1224, NEMA 12, Circuits: 24;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,982.00 1047 AME-1980-1224-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1224-R-SP-X  Base Part Number:  1980-1224, NEMA 12, Circuits: 24;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,734.00 1048 AME-1980-1224-X-SP-X-M-2 Ametek Gemco Rotating Cam Limit Switch Model 1980-1224-X-SP-X-M-2  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure. Dust Tight  24 = 24 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = from the enclosure  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   M 2  3 Year Limited Warranty  (14LBS) H 8" L 18" W 12"  [Amazon] 0 $6,488.63 1049 AME-1980-1225-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1225-D-DP-X  Base Part Number:  1980-1225, NEMA 12, Circuits: 25;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,657.00 1050 AME-1980-1225-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1225-D-SP-X  Base Part Number:  1980-1225, NEMA 12, Circuits: 25;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,357.00 1051 AME-1980-1225-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1225-L-DP-X  Base Part Number:  1980-1225, NEMA 12, Circuits: 25;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,570.00 1052 AME-1980-1225-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1225-L-SP-X  Base Part Number:  1980-1225, NEMA 12, Circuits: 25;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,270.00 1053 AME-1980-1225-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1225-R-DP-X  Base Part Number:  1980-1225, NEMA 12, Circuits: 25;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,570.00 1054 AME-1980-1225-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1225-R-SP-X  Base Part Number:  1980-1225, NEMA 12, Circuits: 25;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,270.00 1055 AME-1980-1226-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1226-D-DP-X  Base Part Number:  1980-1226, NEMA 12, Circuits: 26;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,897.00 1056 AME-1980-1226-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1226-D-SP-X  Base Part Number:  1980-1226, NEMA 12, Circuits: 26;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,545.00 1057 AME-1980-1226-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1226-L-DP-X  Base Part Number:  1980-1226, NEMA 12, Circuits: 26;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,810.00 1058 AME-1980-1226-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1226-L-SP-X  Base Part Number:  1980-1226, NEMA 12, Circuits: 26;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,458.00 1059 AME-1980-1226-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1226-R-DP-X  Base Part Number:  1980-1226, NEMA 12, Circuits: 26;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,810.00 1060 AME-1980-1226-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1226-R-SP-X  Base Part Number:  1980-1226, NEMA 12, Circuits: 26;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,458.00 1061 AME-1980-1227-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1227-D-DP-X  Base Part Number:  1980-1227, NEMA 12, Circuits: 27;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,143.00 1062 AME-1980-1227-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1227-D-SP-X  Base Part Number:  1980-1227, NEMA 12, Circuits: 27;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,739.00 1063 AME-1980-1227-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1227-L-DP-X  Base Part Number:  1980-1227, NEMA 12, Circuits: 27;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,056.00 1064 AME-1980-1227-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1227-L-SP-X  Base Part Number:  1980-1227, NEMA 12, Circuits: 27;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,652.00 1065 AME-1980-1227-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1227-R-DP-X  Base Part Number:  1980-1227, NEMA 12, Circuits: 27;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,056.00 1066 AME-1980-1227-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1227-R-SP-X  Base Part Number:  1980-1227, NEMA 12, Circuits: 27;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,652.00 1067 AME-1980-1228-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1228-D-DP-X  Base Part Number:  1980-1228, NEMA 12, Circuits: 28;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,379.00 1068 AME-1980-1228-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1228-D-SP-X  Base Part Number:  1980-1228, NEMA 12, Circuits: 28;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,923.00 1069 AME-1980-1228-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1228-L-DP-X  Base Part Number:  1980-1228, NEMA 12, Circuits: 28;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,292.00 1070 AME-1980-1228-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1228-L-SP-X  Base Part Number:  1980-1228, NEMA 12, Circuits: 28;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,836.00 1071 AME-1980-1228-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1228-R-DP-X  Base Part Number:  1980-1228, NEMA 12, Circuits: 28;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,292.00 1072 AME-1980-1228-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1228-R-SP-X  Base Part Number:  1980-1228, NEMA 12, Circuits: 28;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,836.00 1073 AME-1980-1229-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1229-D-DP-X  Base Part Number:  1980-1229, NEMA 12, Circuits: 29;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,971.00 1074 AME-1980-1229-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1229-D-SP-X  Base Part Number:  1980-1229, NEMA 12, Circuits: 29;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,463.00 1075 AME-1980-1229-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1229-L-DP-X  Base Part Number:  1980-1229, NEMA 12, Circuits: 29;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,884.00 1076 AME-1980-1229-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1229-L-SP-X  Base Part Number:  1980-1229, NEMA 12, Circuits: 29;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,376.00 1077 AME-1980-1229-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1229-R-DP-X  Base Part Number:  1980-1229, NEMA 12, Circuits: 29;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,884.00 1078 AME-1980-1229-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1229-R-SP-X  Base Part Number:  1980-1229, NEMA 12, Circuits: 29;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,376.00 1079 AME-1980-122-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-122-D-DP-X  Base Part Number:  1980-122, NEMA 1, Circuits: 22;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,901.00 1080 AME-1980-122-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-122-D-SP-X  Base Part Number:  1980-122, NEMA 1, Circuits: 22;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,757.00 1081 AME-1980-122-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-122-L-DP-X  Base Part Number:  1980-122, NEMA 1, Circuits: 22;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,814.00 1082 AME-1980-122-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-122-L-SP-X  Base Part Number:  1980-122, NEMA 1, Circuits: 22;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,670.00 1083 AME-1980-122-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-122-R-DP-X  Base Part Number:  1980-122, NEMA 1, Circuits: 22;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,814.00 1084 AME-1980-122-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-122-R-SP-X  Base Part Number:  1980-122, NEMA 1, Circuits: 22;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,670.00 1085 AME-1980-1230-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1230-D-DP-X  Base Part Number:  1980-1230, NEMA 12, Circuits: 30;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,212.00 1086 AME-1980-1230-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1230-D-SP-X  Base Part Number:  1980-1230, NEMA 12, Circuits: 30;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,652.00 1087 AME-1980-1230-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1230-L-DP-X  Base Part Number:  1980-1230, NEMA 12, Circuits: 30;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,125.00 1088 AME-1980-1230-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1230-L-SP-X  Base Part Number:  1980-1230, NEMA 12, Circuits: 30;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,565.00 1089 AME-1980-1230-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1230-R-DP-X  Base Part Number:  1980-1230, NEMA 12, Circuits: 30;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,125.00 1090 AME-1980-1230-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1230-R-SP-X  Base Part Number:  1980-1230, NEMA 12, Circuits: 30;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,565.00 1091 AME-1980-1231-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1231-D-DP-X  Base Part Number:  1980-1231, NEMA 12, Circuits: 31;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,461.00 1092 AME-1980-1231-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1231-D-SP-X  Base Part Number:  1980-1231, NEMA 12, Circuits: 31;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,849.00 1093 AME-1980-1231-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1231-L-DP-X  Base Part Number:  1980-1231, NEMA 12, Circuits: 31;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,374.00 1094 AME-1980-1231-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1231-L-SP-X  Base Part Number:  1980-1231, NEMA 12, Circuits: 31;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,762.00 1095 AME-1980-1231-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1231-R-DP-X  Base Part Number:  1980-1231, NEMA 12, Circuits: 31;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,374.00 1096 AME-1980-1231-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1231-R-SP-X  Base Part Number:  1980-1231, NEMA 12, Circuits: 31;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,762.00 1097 AME-1980-1232-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1232-D-DP-X  Base Part Number:  1980-1232, NEMA 12, Circuits: 32;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,703.00 1098 AME-1980-1232-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1232-D-SP-X  Base Part Number:  1980-1232, NEMA 12, Circuits: 32;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,039.00 1099 AME-1980-1232-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1232-L-DP-X  Base Part Number:  1980-1232, NEMA 12, Circuits: 32;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,616.00 1100 AME-1980-1232-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1232-L-SP-X  Base Part Number:  1980-1232, NEMA 12, Circuits: 32;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,952.00 1101 AME-1980-1232-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1232-R-DP-X  Base Part Number:  1980-1232, NEMA 12, Circuits: 32;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,616.00 1102 AME-1980-1232-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1232-R-SP-X  Base Part Number:  1980-1232, NEMA 12, Circuits: 32;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,952.00 1103 AME-1980-1233-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1233-D-DP-X  Base Part Number:  1980-1233, NEMA 12, Circuits: 33;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,298.00 1104 AME-1980-1233-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1233-D-SP-X  Base Part Number:  1980-1233, NEMA 12, Circuits: 33;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,582.00 1105 AME-1980-1233-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1233-L-DP-X  Base Part Number:  1980-1233, NEMA 12, Circuits: 33;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,211.00 1106 AME-1980-1233-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1233-L-SP-X  Base Part Number:  1980-1233, NEMA 12, Circuits: 33;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,495.00 1107 AME-1980-1233-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1233-R-DP-X  Base Part Number:  1980-1233, NEMA 12, Circuits: 33;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,211.00 1108 AME-1980-1233-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1233-R-SP-X  Base Part Number:  1980-1233, NEMA 12, Circuits: 33;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,495.00 1109 AME-1980-1234-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1234-D-DP-X  Base Part Number:  1980-1234, NEMA 12, Circuits: 34;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,537.00 1110 AME-1980-1234-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1234-D-SP-X  Base Part Number:  1980-1234, NEMA 12, Circuits: 34;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,769.00 1111 AME-1980-1234-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1234-L-DP-X  Base Part Number:  1980-1234, NEMA 12, Circuits: 34;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,450.00 1112 AME-1980-1234-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1234-L-SP-X  Base Part Number:  1980-1234, NEMA 12, Circuits: 34;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,682.00 1113 AME-1980-1234-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1234-R-DP-X  Base Part Number:  1980-1234, NEMA 12, Circuits: 34;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,450.00 1114 AME-1980-1234-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1234-R-SP-X  Base Part Number:  1980-1234, NEMA 12, Circuits: 34;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,682.00 1115 AME-1980-1235-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1235-D-DP-X  Base Part Number:  1980-1235, NEMA 12, Circuits: 35;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,772.00 1116 AME-1980-1235-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1235-D-SP-X  Base Part Number:  1980-1235, NEMA 12, Circuits: 35;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,952.00 1117 AME-1980-1235-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1235-L-DP-X  Base Part Number:  1980-1235, NEMA 12, Circuits: 35;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,685.00 1118 AME-1980-1235-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1235-L-SP-X  Base Part Number:  1980-1235, NEMA 12, Circuits: 35;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,865.00 1119 AME-1980-1235-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1235-R-DP-X  Base Part Number:  1980-1235, NEMA 12, Circuits: 35;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,685.00 1120 AME-1980-1235-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1235-R-SP-X  Base Part Number:  1980-1235, NEMA 12, Circuits: 35;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,865.00 1121 AME-1980-1236-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1236-D-DP-X  Base Part Number:  1980-1236, NEMA 12, Circuits: 36;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,013.00 1122 AME-1980-1236-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1236-D-SP-X  Base Part Number:  1980-1236, NEMA 12, Circuits: 36;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,141.00 1123 AME-1980-1236-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1236-L-DP-X  Base Part Number:  1980-1236, NEMA 12, Circuits: 36;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,926.00 1124 AME-1980-1236-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1236-L-SP-X  Base Part Number:  1980-1236, NEMA 12, Circuits: 36;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,054.00 1125 AME-1980-1236-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1236-R-DP-X  Base Part Number:  1980-1236, NEMA 12, Circuits: 36;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,926.00 1126 AME-1980-1236-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1236-R-SP-X  Base Part Number:  1980-1236, NEMA 12, Circuits: 36;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,054.00 1127 AME-1980-1237-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1237-D-DP-X  Base Part Number:  1980-1237, NEMA 12, Circuits: 37;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,607.00 1128 AME-1980-1237-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1237-D-SP-X  Base Part Number:  1980-1237, NEMA 12, Circuits: 37;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,683.00 1129 AME-1980-1237-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1237-L-DP-X  Base Part Number:  1980-1237, NEMA 12, Circuits: 37;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,520.00 1130 AME-1980-1237-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1237-L-SP-X  Base Part Number:  1980-1237, NEMA 12, Circuits: 37;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,596.00 1131 AME-1980-1237-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1237-R-DP-X  Base Part Number:  1980-1237, NEMA 12, Circuits: 37;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,520.00 1132 AME-1980-1237-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1237-R-SP-X  Base Part Number:  1980-1237, NEMA 12, Circuits: 37;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,596.00 1133 AME-1980-1238-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1238-D-DP-X  Base Part Number:  1980-1238, NEMA 12, Circuits: 38;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,844.00 1134 AME-1980-1238-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1238-D-SP-X  Base Part Number:  1980-1238, NEMA 12, Circuits: 38;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,868.00 1135 AME-1980-1238-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1238-L-DP-X  Base Part Number:  1980-1238, NEMA 12, Circuits: 38;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,757.00 1136 AME-1980-1238-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1238-L-SP-X  Base Part Number:  1980-1238, NEMA 12, Circuits: 38;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,781.00 1137 AME-1980-1238-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1238-R-DP-X  Base Part Number:  1980-1238, NEMA 12, Circuits: 38;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,757.00 1138 AME-1980-1238-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1238-R-SP-X  Base Part Number:  1980-1238, NEMA 12, Circuits: 38;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,781.00 1139 AME-1980-1239-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1239-D-DP-X  Base Part Number:  1980-1239, NEMA 12, Circuits: 39;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $14,092.00 1140 AME-1980-1239-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1239-D-SP-X  Base Part Number:  1980-1239, NEMA 12, Circuits: 39;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,064.00 1141 AME-1980-1239-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1239-L-DP-X  Base Part Number:  1980-1239, NEMA 12, Circuits: 39;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $14,005.00 1142 AME-1980-1239-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1239-L-SP-X  Base Part Number:  1980-1239, NEMA 12, Circuits: 39;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,977.00 1143 AME-1980-1239-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1239-R-DP-X  Base Part Number:  1980-1239, NEMA 12, Circuits: 39;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $14,005.00 1144 AME-1980-1239-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1239-R-SP-X  Base Part Number:  1980-1239, NEMA 12, Circuits: 39;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,977.00 1145 AME-1980-123-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-123-D-DP-X  Base Part Number:  1980-123, NEMA 1, Circuits: 23;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,138.00 1146 AME-1980-123-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-123-D-SP-X  Base Part Number:  1980-123, NEMA 1, Circuits: 23;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,942.00 1147 AME-1980-123-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-123-L-DP-X  Base Part Number:  1980-123, NEMA 1, Circuits: 23;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,051.00 1148 AME-1980-123-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-123-L-SP-X  Base Part Number:  1980-123, NEMA 1, Circuits: 23;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,855.00 1149 AME-1980-123-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-123-R-DP-X  Base Part Number:  1980-123, NEMA 1, Circuits: 23;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,051.00 1150 AME-1980-123-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-123-R-SP-X  Base Part Number:  1980-123, NEMA 1, Circuits: 23;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $6,855.00 1151 AME-1980-1240-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1240-D-DP-X  Base Part Number:  1980-1240, NEMA 12, Circuits: 40;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $14,344.00 1152 AME-1980-1240-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1240-D-SP-X  Base Part Number:  1980-1240, NEMA 12, Circuits: 40;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,264.00 1153 AME-1980-1240-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1240-L-DP-X  Base Part Number:  1980-1240, NEMA 12, Circuits: 40;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $14,257.00 1154 AME-1980-1240-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1240-L-SP-X  Base Part Number:  1980-1240, NEMA 12, Circuits: 40;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,177.00 1155 AME-1980-1240-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1240-R-DP-X  Base Part Number:  1980-1240, NEMA 12, Circuits: 40;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $14,257.00 1156 AME-1980-1240-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-1240-R-SP-X  Base Part Number:  1980-1240, NEMA 12, Circuits: 40;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,177.00 1157 AME-1980-124-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-124-D-DP-X  Base Part Number:  1980-124, NEMA 1, Circuits: 24;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,381.00 1158 AME-1980-124-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-124-D-SP-X  Base Part Number:  1980-124, NEMA 1, Circuits: 24;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,133.00 1159 AME-1980-124-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-124-L-DP-X  Base Part Number:  1980-124, NEMA 1, Circuits: 24;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,294.00 1160 AME-1980-124-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-124-L-SP-X  Base Part Number:  1980-124, NEMA 1, Circuits: 24;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,046.00 1161 AME-1980-124-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-124-R-DP-X  Base Part Number:  1980-124, NEMA 1, Circuits: 24;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,294.00 1162 AME-1980-124-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-124-R-SP-X  Base Part Number:  1980-124, NEMA 1, Circuits: 24;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,046.00 1163 AME-1980-125-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-125-D-DP-X  Base Part Number:  1980-125, NEMA 1, Circuits: 25;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,966.00 1164 AME-1980-125-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-125-D-SP-X  Base Part Number:  1980-125, NEMA 1, Circuits: 25;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,666.00 1165 AME-1980-125-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-125-L-DP-X  Base Part Number:  1980-125, NEMA 1, Circuits: 25;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,879.00 1166 AME-1980-125-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-125-L-SP-X  Base Part Number:  1980-125, NEMA 1, Circuits: 25;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,579.00 1167 AME-1980-125-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-125-R-DP-X  Base Part Number:  1980-125, NEMA 1, Circuits: 25;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,879.00 1168 AME-1980-125-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-125-R-SP-X  Base Part Number:  1980-125, NEMA 1, Circuits: 25;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,579.00 1169 AME-1980-126-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-126-D-DP-X  Base Part Number:  1980-126, NEMA 1, Circuits: 26;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,210.00 1170 AME-1980-126-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-126-D-SP-X  Base Part Number:  1980-126, NEMA 1, Circuits: 26;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,858.00 1171 AME-1980-126-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-126-L-DP-X  Base Part Number:  1980-126, NEMA 1, Circuits: 26;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,123.00 1172 AME-1980-126-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-126-L-SP-X  Base Part Number:  1980-126, NEMA 1, Circuits: 26;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,771.00 1173 AME-1980-126-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-126-R-DP-X  Base Part Number:  1980-126, NEMA 1, Circuits: 26;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,123.00 1174 AME-1980-126-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-126-R-SP-X  Base Part Number:  1980-126, NEMA 1, Circuits: 26;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,771.00 1175 AME-1980-127-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-127-D-DP-X  Base Part Number:  1980-127, NEMA 1, Circuits: 27;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,448.00 1176 AME-1980-127-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-127-D-SP-X  Base Part Number:  1980-127, NEMA 1, Circuits: 27;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,044.00 1177 AME-1980-127-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-127-L-DP-X  Base Part Number:  1980-127, NEMA 1, Circuits: 27;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,361.00 1178 AME-1980-127-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-127-L-SP-X  Base Part Number:  1980-127, NEMA 1, Circuits: 27;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,957.00 1179 AME-1980-127-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-127-R-DP-X  Base Part Number:  1980-127, NEMA 1, Circuits: 27;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,361.00 1180 AME-1980-127-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-127-R-SP-X  Base Part Number:  1980-127, NEMA 1, Circuits: 27;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $7,957.00 1181 AME-1980-128-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-128-D-DP-X  Base Part Number:  1980-128, NEMA 1, Circuits: 28;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,692.00 1182 AME-1980-128-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-128-D-SP-X  Base Part Number:  1980-128, NEMA 1, Circuits: 28;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,236.00 1183 AME-1980-128-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-128-L-DP-X  Base Part Number:  1980-128, NEMA 1, Circuits: 28;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,605.00 1184 AME-1980-128-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-128-L-SP-X  Base Part Number:  1980-128, NEMA 1, Circuits: 28;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,149.00 1185 AME-1980-128-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-128-R-DP-X  Base Part Number:  1980-128, NEMA 1, Circuits: 28;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,605.00 1186 AME-1980-128-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-128-R-SP-X  Base Part Number:  1980-128, NEMA 1, Circuits: 28;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,149.00 1187 AME-1980-129-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-129-D-DP-X  Base Part Number:  1980-129, NEMA 1, Circuits: 29;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,279.00 1188 AME-1980-129-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-129-D-SP-X  Base Part Number:  1980-129, NEMA 1, Circuits: 29;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,771.00 1189 AME-1980-129-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-129-L-DP-X  Base Part Number:  1980-129, NEMA 1, Circuits: 29;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,192.00 1190 AME-1980-129-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-129-L-SP-X  Base Part Number:  1980-129, NEMA 1, Circuits: 29;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,684.00 1191 AME-1980-129-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-129-R-DP-X  Base Part Number:  1980-129, NEMA 1, Circuits: 29;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,192.00 1192 AME-1980-129-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-129-R-SP-X  Base Part Number:  1980-129, NEMA 1, Circuits: 29;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,684.00 1193 AME-1980-130-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-130-D-DP-X  Base Part Number:  1980-130, NEMA 1, Circuits: 30;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,522.00 1194 AME-1980-130-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-130-D-SP-X  Base Part Number:  1980-130, NEMA 1, Circuits: 30;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,962.00 1195 AME-1980-130-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-130-L-DP-X  Base Part Number:  1980-130, NEMA 1, Circuits: 30;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,435.00 1196 AME-1980-130-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-130-L-SP-X  Base Part Number:  1980-130, NEMA 1, Circuits: 30;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,875.00 1197 AME-1980-130-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-130-R-DP-X  Base Part Number:  1980-130, NEMA 1, Circuits: 30;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,435.00 1198 AME-1980-130-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-130-R-SP-X  Base Part Number:  1980-130, NEMA 1, Circuits: 30;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $8,875.00 1199 AME-1980-131-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-131-D-DP-X  Base Part Number:  1980-131, NEMA 1, Circuits: 31;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,762.00 1200 AME-1980-131-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-131-D-SP-X  Base Part Number:  1980-131, NEMA 1, Circuits: 31;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,150.00 1201 AME-1980-131-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-131-L-DP-X  Base Part Number:  1980-131, NEMA 1, Circuits: 31;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,675.00 1202 AME-1980-131-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-131-L-SP-X  Base Part Number:  1980-131, NEMA 1, Circuits: 31;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,063.00 1203 AME-1980-131-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-131-R-DP-X  Base Part Number:  1980-131, NEMA 1, Circuits: 31;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,675.00 1204 AME-1980-131-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-131-R-SP-X  Base Part Number:  1980-131, NEMA 1, Circuits: 31;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,063.00 1205 AME-1980-132-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-132-D-DP-X  Base Part Number:  1980-132, NEMA 1, Circuits: 32;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,003.00 1206 AME-1980-132-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-132-D-SP-X  Base Part Number:  1980-132, NEMA 1, Circuits: 32;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,339.00 1207 AME-1980-132-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-132-L-DP-X  Base Part Number:  1980-132, NEMA 1, Circuits: 32;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,916.00 1208 AME-1980-132-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-132-L-SP-X  Base Part Number:  1980-132, NEMA 1, Circuits: 32;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,252.00 1209 AME-1980-132-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-132-R-DP-X  Base Part Number:  1980-132, NEMA 1, Circuits: 32;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,916.00 1210 AME-1980-132-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-132-R-SP-X  Base Part Number:  1980-132, NEMA 1, Circuits: 32;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,252.00 1211 AME-1980-133-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-133-D-DP-X  Base Part Number:  1980-133, NEMA 1, Circuits: 33;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,595.00 1212 AME-1980-133-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-133-D-SP-X  Base Part Number:  1980-133, NEMA 1, Circuits: 33;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,879.00 1213 AME-1980-133-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-133-L-DP-X  Base Part Number:  1980-133, NEMA 1, Circuits: 33;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,508.00 1214 AME-1980-133-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-133-L-SP-X  Base Part Number:  1980-133, NEMA 1, Circuits: 33;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,792.00 1215 AME-1980-133-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-133-R-DP-X  Base Part Number:  1980-133, NEMA 1, Circuits: 33;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,508.00 1216 AME-1980-133-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-133-R-SP-X  Base Part Number:  1980-133, NEMA 1, Circuits: 33;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,792.00 1217 AME-1980-134-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-134-D-DP-X  Base Part Number:  1980-134, NEMA 1, Circuits: 34;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,834.00 1218 AME-1980-134-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-134-D-SP-X  Base Part Number:  1980-134, NEMA 1, Circuits: 34;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,066.00 1219 AME-1980-134-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-134-L-DP-X  Base Part Number:  1980-134, NEMA 1, Circuits: 34;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,747.00 1220 AME-1980-134-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-134-L-SP-X  Base Part Number:  1980-134, NEMA 1, Circuits: 34;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,979.00 1221 AME-1980-134-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-134-R-DP-X  Base Part Number:  1980-134, NEMA 1, Circuits: 34;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,747.00 1222 AME-1980-134-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-134-R-SP-X  Base Part Number:  1980-134, NEMA 1, Circuits: 34;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $9,979.00 1223 AME-1980-135-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-135-D-DP-X  Base Part Number:  1980-135, NEMA 1, Circuits: 35;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,072.00 1224 AME-1980-135-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-135-D-SP-X  Base Part Number:  1980-135, NEMA 1, Circuits: 35;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,252.00 1225 AME-1980-135-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-135-L-DP-X  Base Part Number:  1980-135, NEMA 1, Circuits: 35;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,985.00 1226 AME-1980-135-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-135-L-SP-X  Base Part Number:  1980-135, NEMA 1, Circuits: 35;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,165.00 1227 AME-1980-135-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-135-R-DP-X  Base Part Number:  1980-135, NEMA 1, Circuits: 35;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,985.00 1228 AME-1980-135-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-135-R-SP-X  Base Part Number:  1980-135, NEMA 1, Circuits: 35;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,165.00 1229 AME-1980-136-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-136-D-DP-X  Base Part Number:  1980-136, NEMA 1, Circuits: 36;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,315.00 1230 AME-1980-136-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-136-D-SP-X  Base Part Number:  1980-136, NEMA 1, Circuits: 36;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,443.00 1231 AME-1980-136-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-136-L-DP-X  Base Part Number:  1980-136, NEMA 1, Circuits: 36;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,228.00 1232 AME-1980-136-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-136-L-SP-X  Base Part Number:  1980-136, NEMA 1, Circuits: 36;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,356.00 1233 AME-1980-136-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-136-R-DP-X  Base Part Number:  1980-136, NEMA 1, Circuits: 36;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,228.00 1234 AME-1980-136-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-136-R-SP-X  Base Part Number:  1980-136, NEMA 1, Circuits: 36;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,356.00 1235 AME-1980-137-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-137-D-DP-X  Base Part Number:  1980-137, NEMA 1, Circuits: 37;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,909.00 1236 AME-1980-137-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-137-D-SP-X  Base Part Number:  1980-137, NEMA 1, Circuits: 37;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,985.00 1237 AME-1980-137-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-137-L-DP-X  Base Part Number:  1980-137, NEMA 1, Circuits: 37;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,822.00 1238 AME-1980-137-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-137-L-SP-X  Base Part Number:  1980-137, NEMA 1, Circuits: 37;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,898.00 1239 AME-1980-137-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-137-R-DP-X  Base Part Number:  1980-137, NEMA 1, Circuits: 37;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $12,822.00 1240 AME-1980-137-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-137-R-SP-X  Base Part Number:  1980-137, NEMA 1, Circuits: 37;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $10,898.00 1241 AME-1980-138-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-138-D-DP-X  Base Part Number:  1980-138, NEMA 1, Circuits: 38;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,152.00 1242 AME-1980-138-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-138-D-SP-X  Base Part Number:  1980-138, NEMA 1, Circuits: 38;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,176.00 1243 AME-1980-138-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-138-L-DP-X  Base Part Number:  1980-138, NEMA 1, Circuits: 38;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,065.00 1244 AME-1980-138-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-138-L-SP-X  Base Part Number:  1980-138, NEMA 1, Circuits: 38;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,089.00 1245 AME-1980-138-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-138-R-DP-X  Base Part Number:  1980-138, NEMA 1, Circuits: 38;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,065.00 1246 AME-1980-138-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-138-R-SP-X  Base Part Number:  1980-138, NEMA 1, Circuits: 38;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,089.00 1247 AME-1980-139-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-139-D-DP-X  Base Part Number:  1980-139, NEMA 1, Circuits: 39;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,390.00 1248 AME-1980-139-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-139-D-SP-X  Base Part Number:  1980-139, NEMA 1, Circuits: 39;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,362.00 1249 AME-1980-139-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-139-L-DP-X  Base Part Number:  1980-139, NEMA 1, Circuits: 39;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,303.00 1250 AME-1980-139-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-139-L-SP-X  Base Part Number:  1980-139, NEMA 1, Circuits: 39;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,275.00 1251 AME-1980-139-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-139-R-DP-X  Base Part Number:  1980-139, NEMA 1, Circuits: 39;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,303.00 1252 AME-1980-139-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-139-R-SP-X  Base Part Number:  1980-139, NEMA 1, Circuits: 39;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,275.00 1253 AME-1980-140-D-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-140-D-DP-X  Base Part Number:  1980-140, NEMA 1, Circuits: 40;  Shaft Extension:  D - Double Ended;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,629.00 1254 AME-1980-140-D-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-140-D-SP-X  Base Part Number:  1980-140, NEMA 1, Circuits: 40;  Shaft Extension:  D - Double Ended;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,549.00 1255 AME-1980-140-L-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-140-L-DP-X  Base Part Number:  1980-140, NEMA 1, Circuits: 40;  Shaft Extension:  L - Left Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,542.00 1256 AME-1980-140-L-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-140-L-SP-X  Base Part Number:  1980-140, NEMA 1, Circuits: 40;  Shaft Extension:  L - Left Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,462.00 1257 AME-1980-140-R-DP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-140-R-DP-X  Base Part Number:  1980-140, NEMA 1, Circuits: 40;  Shaft Extension:  R - Right Hand;  Switch:  DP - Double Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $13,542.00 1258 AME-1980-140-R-SP-X Ametek Gemco 1980 Rotating Cam Limit Switch, P/N: AME-1980-140-R-SP-X  Base Part Number:  1980-140, NEMA 1, Circuits: 40;  Shaft Extension:  R - Right Hand;  Switch:  SP - Single Pole, Double Throw;  Timing Dial and Mounting:  X - None;  (14LBS) H 8" L 18" W 12"  [Amazon]  [1/2017]  [1/2018]  [1/2018] 0 $11,462.00 1259 AME-1980-2090 Ametek Gemco Rotating Cam Limit Switch   Part 1980-2090  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure, Gasketed, Dust Resistant  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   Qty. 3, SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Qty. 1, DP = DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch, circuit 4  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (18LBS) Dated 1/17 - 0 $1,290.60 1260 AME-1980-2196 Ametek Gemco Rotating Cam Limit Switch Model 1980-XXXX SPECIAL MAIN SHAFT EXTENDS 3 INCHES FROM ENCLOSURE / ADDITIONAL LENGTH BY 1.5 INCHES / TOTAL EXTENSION 3 INCHES  NEMA 1 Rated Enclosure  6 Independent Cams / Circuits / Switches   Right Hand Shaft Extension from Enclosure   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches   No Timing Dial or Dial Window is to be provided 1/13 - 0 $1,190.16 1261 AME-1980-3087 Ametek Gemco 1980 Series Cam Box with Motion Detect.   NEMA 1 Enclosure  5 Circuit / Switch / Cam  with Motion Detect - 0 $1,220.40 1262 AME-1980-3004B Ametek Gemco 1980 Series Rotary Cam Limit Switch  NEMA 1 Custom Enclosure with a Special Main Shaft  4 Independent Circuits / Cams / Switches  SPDT Switches   ADD A CAM Feature, for future or OEM Addition of Cam / Circuit  Left Hand Shaft Extension 8/15 - 0 $1,269.00 1263 AME-1980-3146 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-3146  19803146  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  5 Cams / Circuits / Switches, with the "Add a Cam" feature for a future or OEM circuit.  The "Add a Cam" feature makes it easy to add a 6th Circuit without removing the Main Shaft from the Frame.  Left Hand Shaft Extension from enclosure   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a Normally Open or a Normally Closed Circuit.  4 screw terminals per switch  No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  Ships in  Dated - 0 $1,279.80 1264 AME-1980-2724T Ametek Gemco Rotating Cam Limit Switch with a Tach Generator Mounted on the Right Side & a 1970-104 Drive-Chek  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Rated Enclosure  4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Left Hand Shaft Extension from Enclosure   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   No Timing Dial or Dial Window is to be provided  10/10 - 0 $1,346.76 1265 AME-1980-3010T Ametek Gemco Rotating Cam Limit Switch  Model 1980-3010T  aka 1980-3010  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Left Hand Shaft Extension from Enclosure   Qty 3, SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Qty 1, DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  Add on Tach Gen Module PSD153603  Includes Drive Chek 1970-104  2 Special Cams SD2231 110 Degrees & Cam SD2382 45 Degrees on the DPDT Switch  4 Weeks to Ship 1/17 - 0 $1,823.04 1266 AME-1980-2118 Ametek Gemco Cam Limit Switch - 0 $1,424.52 1267 AME-1980-3486 Ametek Gemco 1980 Cam Limit Switch   Engineered Part 1980-3486  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees  NEMA 1 Enclosure  6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Left Hand Shaft Extension from Enclosure   SPDT Switches / Single Pole Double Throw, Snap Action Switches  Which can be wired for either a N.O. or N.C. Circuits  4 Screw Terminals per switch  Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   Add On Feature:  Enclosure Space provided for a Tach Generator on the Right Hand End  The Tach Generator is supplied buy others  Lock Out Attachment for padlocking the cover closed, padlock is not included  (19LBS) Dated 1/18 - 0 $1,801.44 1268 AME-1980-3953 Ametek Gemco Rotary Cam Limit Switch  NEMA 1 Enclosure   8 Circuit / Cam / Switch  SPDT Switches  Left Hand Shaft Extension  Specially Engineered Shaft Extension  Ametek Gemco Rotary Cam Limit Switch  NEMA 1 Enclosure   8 Circuit / Cam / Switch  SPDT Switches  Left Hand Shaft Extension  Specially Engineered Shaft Extension   (17LBS) H 4.05" L 14.16" W 6.60"  [Amazon] 0 $1,497.96 1269 AME-1980-3147 Ametek Gemco Series 1980 Cam Limit Switch  Engineered for EW Bliss  7 Circuit unit wi the "Add A Cam" feature.  Used with Driv-check 1970-1324 - 0 $1,504.44 1270 AME-1980-3747 Ametek Gemco Rotating Cam Limit Switch   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Enclosure, Sheet Metal Cover   8 Independent Circuits / Cams/ Switches   Double Shaft Extension, shafts exit from both ends of the enclosure. Specially machined right hand shaft extension for EW Bliss  SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  3 Year Warranty (17LBS) 1/13 - 0 $1,616.76 1271 AME-1980-1615 Gemco Cam Limit Switch  NEMA 1  4 Circuit  SPDT Switches  Right Angle Gear Reducer, 5 to 1 Ratio  Shaft Position R3  Special Output Shaft / Quad Thread - 0 $1,618.92 1272 AME-1980-2214 Ametek Gemco Rotating Cam Limit Switch Model like 1980-1206-R-SP-X but has a 1/4 -20 drilled & tapped hole in the end of the main shaft by 0.75 deep  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 12 Enclosure  6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Right Hand Shaft Extension from Enclosure   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty (24LBS) - 0 $1,662.12 1273 AME-1980-3434 Ametek Gemco 1980 Series Cam Box  NEMA 12 Enclosure  6 Circuits / Cams / Switches  Double Ended Shaft Extension  Pulse Generating Disc  Built in 1983 for International Harvester - 0 $1,696.68 1274 AME-1980-3915 Ametek Gemco Rotating Cam Limit Switch like Model 1980-406-L-SP-X   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  4 = NEMA 4 304 Stainless Steel Enclosure, cover, latches, bearing flanges & flange bolts. 3/4 Inch 316 Stainless Input Shaft. Meets a NEMA 4X Rating  06 = 6 Independent Cams / Circuits / Switches  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (24LBS) - 0 $1,817.64 1275 AME-1980-3513 Ametek Gemco Rotating Cam Limit Switch   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Rated Enclosure  6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   Qty. 4, SPDT Switches located in positions 1,2,6 & 6,Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Qty. 2, DPDT Switches located in positions 3 & 4, Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuits. 8 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   Right Angle Gear Reducer  10 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Position / Location 1 - 0 $1,840.32 1276 AME-1980-3510 Ametek Gemco Rotating Cam Limit Switch Model 1980-3510 Similar to 1980-1204-L-SP-X  Series 1980  12 = NEMA 12 Enclosure  04 = 4 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   Specially machined cams 2 @ 15 Degrees Dwell & 2 @ 60 Degrees Dwell  Special 1950-1413 Switch, DPDT / Single Pole Double Throw, Slow Make - Slow Break, 1 NO or 1 NC Contact  X = No Timing Dial or Dial Window is provided 1/14 - 0 $1,855.44 1277 AME-1980-2477 Ametek Gemco Rotating Cam Limit Switch Model Engineered Part number & product. Enclosure to have a safety "Lock Out" on the enclosure   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  12 = NEMA 12 Enclosure  07 = 7 Independent Cams / Circuits / Switches  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure   R = Right Hand Shaft Extension from the enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   TD1 = Timing Dial C.W. Clock Wise Rotation  3 Year Warranty - 0 $1,861.92 1278 AME-1980-3963 Ametek Gemco Rotating Cam Limit Switch 1980  Engineered Part 1980-3963  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 4X Enclosure, Watertight  304 Stainless Steel Enclosure, Cover, Latches, Bearing Flanges & Flange Bolts  & a 3/4 Inch 316 Stainless Input Shaft  4 = 4 Independent Cams / Circuits / Switches  R = Right Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed  Switches can be wired for a N.O. or N. C. Circuit  4 screw terminals per switch  X = No Timing Dial or Dial Window is provided  3 Year Warranty ‘  Ships in 5 Weeks, Peck MI  Dated 03-2025  (20LBS) H 11" L 19" W 14" Box 0 $2,886.00 1279 AME-1980-3990 Ametek Gemco Rotating Cam Limit Switch  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   Engineered product with both Single & Double Throw Switches, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  20= 20 to 1 Gear Ratio  L1 = Left End Gear Reducer Shaft Location 1 - 0 $1,912.68 1280 AME-1980-3912 Ametek Gemco Rotating Cam Limit Switch Model 1980-404-R-SP-X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 4 X Stainless Steel Enclosure includes the Cover, Latches, Bearing Flanges, & Flange Bolts from 304 Stainless Steel. The 3/4 Inch Diameter Main / Input Shaft is 316 Stainless. This construction meets a NEMA 4X Rating  4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Right Hand Shaft Extension from Enclosure. special 3 Inch Long, 316 Stainless Steel Shaft  SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   3 Year Limited Warranty / Joseph T Carr Bridge   This cambox does not nclude the padlock hasp and hinge that your photo depicted  (20LBS) 4/14 - 0 $1,922.40 1281 AME-1980-4000 Ametek Gemco Cam Limit Switch  Joseph T Carr Bridge  4 Circuit , SPDT Snap Switches   NEMA 4 X 304 Stainless Steel  Special 3 Inch Long 316 Stainless Steel Shaft   Right Hand Shaft Extension  No padlock & Hasp 1/14 - 0 $1,922.40 1282 AME-1980-2124 Ametek Gemco Cam Limit Switch 1/12 - 0 $1,991.52 1283 AME-1980-3924 Ametek Gemco Rotating Cam Limit Switch Model   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Enclosure   6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  No shaft extension opposite gearbox / no double shaft extension   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   Internal Right Angle Gear Reducer on the Right Side  6 to 1 Gear Ratio 1/12 - 0 $2,013.12 1284 AME-1980-3944T Ametek Gemco Rotating Cam Limit Switch with Internal Resolver 04535001 & Tach Generator 04573067  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Rated Enclosure  6 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   No Timing Dial or Dial Window is to be provided - 0 $2,083.32 1285 AME-1980-2682T Ametek Gemco Cam Limit Switch  Like 1980-105-L-4SP / 1DP-X  With a Tach Generator located on the Left Side  With 2 Special Cams  Includes a Drive Check 1970-106 1/15 - 0 $2,128.68 1286 AME-1980-3989 Ametek Gemco Rotating Cam Limit Switch   1 = NEMA 1 Rated Enclosure  08 = 8 Independent Cams / Circuits / Switches   X = No shaft extension opposite gearbox / no double shaft extension   Engineered product with both Single & Double Throw Switches  X = No Timing Dial or Dial Window is to be provided  R= Right Angle Gear Reducer  40 = 40 to 1 Gear Ratio  R1 = Right End Gear Reducer Position 1 - 0 $2,195.64 1287 AME-1980-3975 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-3975 an Specially Engineered Product  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Right Hand Shaft Extension from Enclosure Left Hand Shaft Extension has an External Timing Dial Mounted on it  SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   3 Year Limited Warranty  NEMA 1 Enclosure  12 Independent Cams - Circuits - Switches   Unit has an external timing dial on left hand shaft extension.  Ships in 4 Weeks, Peck MI  Dated 01-2025 - 0 $4,359.00 1288 AME-1980-2366 Ametek Gemco Rotating Cam Limit Switch 1980  Specially Engineered Part 1980-2366  7 circuits - Cams - Switches  Single Pole Double Throw Switches  Dual Output Shafts  External Timing Dial with Pulse Disk and Switch  Includes # 3001-1 1/2 Inch Sprocket Drive Coupling  Ships in  Dated - 0 $2,427.84 1289 AME-1980-3426 Ametek Gemco 1980 Series Cam Limit Switch  Engineered Part Number  6 Circuit / Cams  NEMA 4 Rated Enclosure, Watertight  SPDT UL Rated Snap Switches  Right Hand Unit  Gear Multiplier, 4 to 1 Ratio  Includes an Ametek Gemco 1/2 Inch Direct Drive Coupling. Maximum torque rating 300 lb.-in. 1/2 inch direct & sprocket drive 404 woodruff keyway & key. 50 turns of the adjusting screw will rotate coupling 360 degrees. For easily made incremental adjustment between drive shaft & cam box - 0 $2,684.88 1290 AME-1980-3948 Ametek Gemco Rotating Cam Limit Switch Model   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 4 Enclosure, Water Tight  10 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Right Hand Shaft Extension   Qty. 7, SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Qty. 3, DPDT Switches / Double Pole Double Throw , Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch. Positions 8,9 & 10  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty 1/11 - 0 $2,771.05 1291 AME-1980-3843 Ametek Gemco Rotating Cam Limit Switch  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 4 Stainless Steel Enclosure with Strip Heater & Thermostat  5 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  No Shaft Extension Opposite the Gear Box  DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Rubber Boots on the Switch Plungers for additional moisture & dust protection  Straight Drive Gear Reducer  40 to 1 Gear Ratio  Right End Shaft Location - 0 $2,970.00 1292 AME-1980-3315 Gemco 1980 Series Cam Box  Specially engineered product  4 Circuit  NEMA 4X, 304 Stainless Steel Enclosure  1 to 3 Straight Drive Gear Multiplier, Internally Mounted  SPDT Switches with the Rubber Boot option  Enclosure is heated with a Thermostat Controlled Strip Heater  Double Shaft Extensions from enclosure  2001403 8/7 - 0 $3,148.20 1293 AME-1980-3853 Ametek Gemco Rotary Cam Limit Switch  NEMA 1 Enclosure, 7 to 8 Circuit Size Drawing D0097100 with Add on Tach  6 Circuit / Cam / Switch  Tach Generator & Resolver Driven by a common Belt 04575082, 126 Pin  Right Hand Shaft Extension - 0 $3,447.36 1294 AME-1980-2152 Ametek Gemco DUAL SHAFT Rotating Cam Limit Switch with Qty. 2, parallel shafts each having Qty. 3, circuits / cams / switches. Precision snap Acting D.P.D.T. Switches. Total 6 circuits. The 2 parallel shafts are coupled with a chain & sprocket inside the enclosure. A Gemco 3001-3 Adjustable Coupling is used to allow timing changes between the 2 shafts. Right hand shaft extension in position "D" with a second Gemco 3001-3 Adjustable Coupling. NEMA 4 Metal Enclosure. Originally designed for Kaiser Steel in 1977 - 0 $3,677.39 1295 AME-1980-2441 Ametek Gemco Series 1980 Rotating Cam Limit Switch. 11 Circuit Cam Box with 5 Standard Cams and 6 Special Cut Cams with 20 Degree of Dwell. SPDT switches with Rubber Plunger Boots for addition dust & moisture protection. Includes a Right Angle Gear Reducer with a 10 to 1 Gear Ratio mounted on the Left End with the 1/2 Inch Shaft in Position L1 . NEMA 12 Enclosure - 0 $3,701.15 1296 AME-1980-3259 Ametek Gemco 1980 Series Cam Limit Switch 1980-3259  NEMA 4X Stainless Steel Enclosure includes the Cover, Latches, Bearing Flanges, & Flange Bolts from 304 Stainless Steel. The 3/4 Inch Diameter Main / Input Shaft is 316 Stainless. This construction meets a NEMA 4X Rating  4 Independent Circuits / Cams / Switches  Straight Drive Gear Reducer mounted internally with an 18 to 1 Gear Ratio  Right Hand Shaft Extension 7/14 - 0 $3,757.31 1297 AME-1980-3283 Ametek Gemco Rotating Cam Limit Switch Model like1980-408-Y-SP-X-M-100-R NEMA 4 X  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 4X Enclosure, Watertight Stainless Steel Enclosure includes the Cover, Latches, Bearing Flanges, & Flange Bolts from 304 Stainless Steel. The 3/4 Inch Diameter Main / Input Shaft is 316 Stainless. This construction meets a NEMA 4X Rating  8 Independent Cams / Circuits / Switches  Shaft Extension Opposite the Gear Box  SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  No Timing Dial  Straight Gear Reducer  1 to 100 Ratio  Right End Shaft Location  (36LBS) - 0 $3,853.43 1298 AME-1980-3383 Ametek Gemco Rotating Cam Limit Switch Model 1980-3383  Series 1980  1 = NEMA 1 Enclosure  10 = 10 Cams / Circuits / Switches  2 of these cams do not have adjustable dwell. They are machined with 25 degrees of dwell   Right Hand Shaft extension from enclosure   9 Single Pole Double Throw Switches  1 1950-1406 Slow Make - Slow Break Switch  X = No Timing Dial or Dial Window is provided - 0 $4,049.99 1299 AME-1980-3327 Ametek Gemco Rotating Cam Limit Switch Model Like model 1980-1210-X-SP-X-R-10-R1  Series 1980   NEMA 12 Enclosure  10 Independent Cams / Circuits / Switches  No Shaft Extension Opposite the Gear Box  SPDT Switches, Single Pole Double Throw Snap Switch U.L. Listed  No Timing Dial is to be included  Right Angle Gear Reducer  10 to 1 Gear Ratio  Right End Shaft Location, Position 1  Special 6 Inch Diameter Cams normally used with the Series 1997 Gate Hoist Products Line  A larger enclosure is also required to enclose these larger cams   (45LBS) - 0 $4,052.15 1300 AME-1980-2386 Ametek Gemco Cam Limit Switch  Series 1980  NEMA 12 Enclosure, Gasketed / Dust Tight  9 Independent Circuits / Switches / Cams  Right Hand Shaft Extension  Timing Dial TD1  1950-1413 Slow Make Slow Break Snap Switch  SD1977 Disc 1/12 - 0 $4,113.71 1301 AME-1980-2312 Ametek Gemco Specially Engineered Rotating Cam Limit Switch   Series 1980 Cam Box featuring some of the cams with Adjustable Timing & Dwell  NEMA 1 Rated Enclosure, Specially Engineered Enclosure & Cover  18 Independent Cams / Circuits / Switches   R = Right Hand Shaft Extension from Enclosure   Qty 16, SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Qty 2, DPDT Switches / Double Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 8 screw terminals per switch  13 Standard Cams, SD0117800  2 Special 15 Degree Cams, SD0203000   1 Special 75 Degree Cam, SD0203100   2 Special 40 Degree Cams, 1/2 Circuit, Right Hand, SD0207500   Internal Right Angle Gear Reducer with a having a 6:1 ratio   3 Position Selector Switch, 22mm with a Black Lever, Spring Return - 0 $4,400.99 1302 AME-1980-2761 Ametek Gemco Rotating Cam Limit Switch  Like Switch Model 1980-911-X-SP-TD1-S-12-L  Series 1980  9 = NEMA 9 Group F Enclosure  11 = 11 Independent Cams / Circuits / Switches  X = No Shaft opposite gearbox   SP = SPDT Switches / Single Pole Double Throw Snap Action Switches U.L. Listed  TD1 = Timing Dial Labeled for C.W. Rotation  S = Straight Drive Gear Box  12 = 12 to 1 Gear Ratio  L = Gear Box Mounted to Left End  With Strip Heater & Thermostat  (50LBS) - 0 $5,448.59 1303 AME-1980-1804 Ametek Gemco Special Cam Limit Switch  1980 Series Cam Limit Switch  Resolver  Special Differential - 0 $5,723.99 1304 AME-1980-3742 Ametek Gemco Rotating Cam Limit   Series 1980  NEMA 9 Enclosure  11 Cams / Circuits / Switches  Double Pole Double Throw Switches  Straight Drive Gear Reducer  12 to 1 Gear Ratio  With Timing Dial, Strip Heater & Thermostat - 0 $6,087.95 1305 AME-1980-2179 Ametek Gemco Rotating Cam Limit Switch Like a 1980-103-L-SP-X with 2 Special Cams  Cam #1 = SD0189100 (Min. Dwell) cir #1 location LH side   Cam #2 = SD0164600 (Min. Lobe) cir #2 location   Cam #3 = SD0117800 (Standard) cir #3 location   Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS) - 0 $630.72 1306 AME-1980-2097 Ametek Gemco Rotating Cam Limit Switch like Model 1980-104-L-SP-X but with a SPECIAL CAM  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Rated Enclosure  4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  One Specially Engineered Cam has been installed   Left Hand Shaft Extension from Enclosure   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660 - 0 $717.12 1307 AME-1980-2348 Ametek Gemco Rotating Cam Limit Switch  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Rated Enclosure  3 Independent Cams / Circuits / Switches   Right Hand Shaft Extension from Enclosure   SPDT Switches in Circuits 1 and 2 A DPDT Switch Circuit 3  No Timing Dial or Dial Window is to be provided  3 Year Warranty  (12LBS) - 0 $739.80 1308 AME-1980-2643 Ametek Gemco Rotating Cam Limit Switch  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Enclosure  03 = 3 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  No Shaft Extension Opposite the Gear Box  SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  No Timing Dial  Straight Drive Gear Reducer with Differential  48 to 1 Gear Ratio  R = Right End Shaft Location 1/11 - 0 $7,678.79 1309 AME-1980-3151 Ametek Gemco Rotating Cam Limit Switch  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Rated Enclosure  4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Specially Engineered Left Hand Shaft which extends 2.5 Inches for the enclosure with a 1/4-20 Tapped Hole in the end and a 3/16 Wide x 3/32 Deep Keyway starting 1 inch from the shaft end   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   No Timing Dial or Dial Window is to be provided  3 Year Limited Warranty  (12LBS) 1/10 - 0 $808.92 1310 AME-1980-3539 Ametek Gemco Rotating Cam Limit Switch  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  9 = NEMA 9 Enclosure, manufactured to meet NEMA 9 Explosion Proof requirements, Class II Groups F & G  11 = 11 Independent Circuits / Cams / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  X = No shaft extension opposite gearbox / no double shaft extension   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch # 1950-1B-A-AO  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  S = Straight Gear Reducer / Input Shaft is Parallel to Cam Box Shaft   12 = 12 to 1 Gear Ratio  Strip Heater with Thermostat 1/12 - 0 $8,148.59 1311 AME-1980-3503 Ametek Gemco Rotating Cam Limit Switch Model 1980-3503  Series 1980  NEMA 9 Enclosure with strip heater & thermostat  11 Cams / Circuits / Switches, SPDT Switches  TD! Timing Dial is included  Straight Drive Gear Reducer 10 to 1 Ratio, Left End  4 to 6 weeks to ship. - 0 $8,331.56 1312 AME-1980-1780 Ametek Gemco 1980-104-L-SP-X & a 1970-104 Drive-Chek - 0 $834.84 1313 AME-1980-3438 Ametek Gemco Rotary Cam Limit Switch, 2 Circuit, NEMA 1 Enclosure, with a Special Main Shaft 0.50 Diameter Left End (12LBS) - 0 $847.80 1314 AME-1980-1535 Ametek Gemco Rotating Cam Limit Switch Model 1980-1535 like a 1980-102-L-SP-X with a special main shaft  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  02 = 2 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  L = Left Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  Specially Engineered Main Shaft Extension: 1/2 Inch Dia X 2 & 5/8 Inches Long  Perkins Press  (10LBS) 1/14 - 0 $861.84 1315 AME-1980-1761 Ametek Gemco Rotating Cam Limit Switch  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  NEMA 1 Enclosure, Sheet Metal Cover  4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  Left Hand Shaft Extension from Enclosure   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660  2 Standard Cams SD0117800 & 2 Special Cams / Federal Press / SD0164600  3 Year Limited Warranty  (12LBS) 1/12 - 0 $913.68 1316 AME-1980-2411 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-2411  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  Switch Settings 4 to 356 Degrees   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  Can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  2 Independent Cams / Circuits / Switches   NEMA 12 --- Brake Monitor Enclosure  Right Hand Shaft Extension from Enclosure   SPDT Switches / Single Pole Double Throw, Snap Action  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per Switch, Switch Part 1950-1-B-A-A0 UL Listed Assembly File E56660   3 Year Limited Warranty  Ships in 3 to 4 Weeks  Dated 1-19 - 0 $1,063.80 1317 AME-1980-1928 Ametek Gemco Rotating Cam Limit Switch  Like Model 1980-104-L-SP-X  Series 1980  1 = NEMA 1 Enclosure  4 = 4 Independent Cams / Circuits / Switches  L = Left Hand Shaft Extension from enclosure   SP = SPDT Switches / Single Pole Double Throw  X = No Timing Dial or Dial Window is provided  Special OEM Product provided to Midland Ross in 1975  Has a special 2 & 7/16 Inch Main Shaft Extension from the Cam Box with the Shaft End Tapped for a 1/4 - 20 fastener  (12LBS) - 0 $946.08 1318 AME-1980-3145 Ametek Gemco Rotating Cam Limit Switch 1980  Part 1980-3145  19803145  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell & the "Add & Cam Feature"  A cam and switch can be added, for a 4th circuit, without removal of the main shaft  The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree  And can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  NEMA 1 Enclosure  Switch Settings 4 to 356 Degrees  3 Independent Cams / Circuits / Switches Add a Cam Feature  Left Hand Shaft Extension from Enclosure   SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches  Which can be wired for either a N.O. or N.C. Circuit  4 Screw Terminals per switch  3 Year Limited Warranty   Normally a Stock Item @ BPI  Ships from Stock to 4 Weeks  Dated 01-2024  (12LBS) H 8" L 18" W 12" Box 0 $1,319.00 1319 AME-1980-3157 Ametek Gemco Rotating Cam Limit Switch Model 1980-3157  Series 1980 Cam Box featuring cams with Adjustable Timing & Dwell  1 = NEMA 1 Rated Enclosure  04 = 4 Independent Cams / Circuits / Switches   The micro-adjust cams maintain an accuracy and repeatability of 1/4 degree and can be adjusted by use of a tool supplied and mounted inside the enclosure or by hand  R = Right Hand Shaft Extension from Enclosure   SP = SPDT Switches / Single Pole Double Throw, Snap Action, U.L. Listed Switches which can be wired for either a Normally Open or a Normally Closed Circuit. 4 screw terminals per switch  Switch Settings 4 to 356 Degrees - Gemco Manufactured Precision Snap Switches - UL Listed Assembly File E56660   X = No Timing Dial or Dial Window is to be provided  SD0197700 Optical Disc  SD0194800 Motion Detect Switch in Circuit 6  (29LBS) 7/6 - 0 $1,065.96

Secure Online Order     Secure Online Order   8,463 part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.