Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
  BRAKE PRODUCTS
48,072 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,361 part numbers: Motion Control Products
 
  GLEASON
17,998 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,209 part numbers: Cable & Hose Management Systems
 
 
 
 
 
  CUTLER-HAMMER
916 part numbers: Electrical Control Products
  HUBBELL
8,387 part numbers: Electrical Control Products
  SUPERBOLT
122 part numbers: Fastening Solutions
  RENOLD
406 part numbers: Mechanical Power Transmission Products
 
AUTOMATIC QUANTITY DISCOUNTS
 
BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.
 
Quotation is valid for 30 days and can be immediately converted into an order.

 
 
CREDIT TERMS CHANGES
 
  1. Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold.
  2. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Gemco Industrial Brakes
Electro-Thrust Brakes - Electro-Thrust Shoe Brakes (ET Style)

 
DESCRIPTION
 
The Electro-Thrust Shoe Brakes have been in service for over 10 years. AISE sizes range from 8 inches in diameter up to 30 inch diameter wheels. Torque values range from 100 foot-pounds to 9,000 ft./lbs.! We also manufacture a line of non-AISE rated brakes. The brakes are spring set for fail-safe operation with an electro-hydraulic actuator that overcomes a setting spring and releases the brake. The actuator is stroked by means of applying power, either AC or DC, to an integral motor attached to a twin cavity housing. The housing is filled with fluid and as the motor spins it creates fluid motion. As the fluid travels through the housing it applies upward pressure to a piston that overcomes the setting spring to release the brake. Cutting power to the motor reverses this function and the spring then gently sets the brake.
 
The Series ET style of shoe brakes are spring set and electrically released by a continuously rated, sealed electrohydraulic actuator. This brake provides smooth brake setting due to the response of the actuator. This inherent cushion effect is desirable for many brake applications. Rugged construction makes this brake suitable for steel mill cranes, container cranes, stacker reclaimers, lock and dam gates, and other heavy-duty applications.
 
Documentation Download:
Industrial Brake Brochure
Industrial Brake Systems Application Guide
Electro Thrust (Model ET) Shoe Brakes Manual
 
CAD Drawings Download:
  • ET6NA (PDF)
  • ET8 (DXF, ZIP)
  • ET8 (PDF)
  • ET8NA (PDF)
  • ET10 (PDF)
  • ET11NA (PDF)
  • ET13 (PDF)
  • ET13, Certified (PDF)
ET14NA (PDF)
ET16 (PDF)
ET18NA (PDF)
ET19 (PDF)
ETH8NA (PDF)
ETH10 (PDF)
ETH14NA (PDF)
ETH14NA, Certified (PDF)
 
GEMCO ET Electro-Thrust Shoe Brakes
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-ET-6NA Ametek Gemco Electro-Thrust Brake Assembly ET-6NA 
6 Inch Diameter Brake 
60 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 1.1 Seconds 
With Adjustable Valve 1.5 to 7.2 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 6 X 3.125, Finished or Pilot Bore Part E006500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
Ships in 6 Weeks 
Dated 06-2022 
Ships via Motor Freight Only  
120 LBS Net, 150 LBS Gross
- 1 $5,201.00
2 AME-ET-8 Ametek Gemco Electro-Thrust Brake Assembly 
Part ET-8 
8 Inch Diameter Brake 
Manufactured to AIST Specifications 
100 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 1.1 Seconds 
With Adjustable Valve 1.5 to 7.2 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
Ships from Stock to 5 Weeks 
Motor Freight Only 
140 LBS Net, 170 LBS Gross 
Dated 1-2020
- 1 $5,282.28
3 AME-ET-8DC Ametek Gemco Electro-Thrust Brake Assembly  
Part ET-8DC 
Manufactured to AIST Specifications 
8 Inch Diameter Brake 
100 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 1.1 Seconds 
With Adjustable Valve 1.5 to 7.2 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
140 LBS Net, 170 LBS Gross 
Ships via Motor Freight Only 
Dated 1/18
- 0 $7,850.52
4 AME-ET-8NA Ametek Gemco Electro-Thrust Brake Assembly 
Part ET-8NA 
8 Inch Diameter Brake 
160 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 1.1 Seconds 
With Adjustable Valve 1.5 to 7.2 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
Ships via Motor Freight Only  
140 LBS Net, 170 LBS Gross 
Ship in 6 to 8 Weeks, Peck MI 
Dated 06-2022
- 3 $5,660.00
5 AME-ET-10 Ametek Gemco Electro-Thrust Brake Assembly ET-10 
10 Inch Diameter Brake 
Manufactured to AIST Specifications 
200 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.3 to 7.3 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 10 X 3.75 Inch, Finished or Pilot Bore Part E010500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
Ships via Motor Freight Only  
150 LBS Net, 180 LBS Gross 
Ships in 8 to 10 Weeks 
Dated 01-2023
- 0 $7,383.00
6 AME-ET-11NA Ametek Gemco Electro-Thrust Brake Assembly 11" 
Part ET-11NA 
11 Inch Diameter Brake 
400 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.3 to 7.3 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 11 X 5.00 Inch, Finished or Pilot Bore Part E011500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
Ships via Motor Freight Only 
Ships in 8 to 10 Weeks, Peck MI 
Dated 01-2023 
170 LBS Net, 200 LBS Gross
- 0 $8,725.00
7 AME-ET-13 Ametek Gemco Electro-Thrust Brake Assembly ET-13 
13 Inch Diameter Brake 
Manufactured to AIST Specifications 
550 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.2 to 4.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 13 X 5.75 Inch, Finished or Pilot Bore Part E013500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
250 LBS Net, 280 LBS Gross 
Ships via Motor Freight Only  
Ships in 10 Weeks, Peck MI 
Dated 06-2022
- 0 $9,273.00
8 AME-ET-13DC Ametek Gemco Electro-Thrust Brake Assembly ET-13 
13 Inch Diameter Brake 
Manufactured to AIST Specifications 
550 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.2 to 4.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 13 X 5.75 Inch, Finished or Pilot Bore Part E013500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
250 LBS Net, 280 LBS Gross 
Ships via Motor Freight Only
- 0 $10,053.71
9 AME-ET-14NA Ametek Gemco Electro-Thrust Brake Assembly 
Part ET-14NA 
14 Inch Diameter Brake 
800 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.2 to 4.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 14 X 4.25 Inch, Finished or Pilot Bore Part E014500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
360 LBS Net, 410 LBS Gross 
Ships via Motor Freight Only  
Ships in 6 Weeks 
Dated 06-2022
- 0 $11,797.00
10 AME-ET-14NA DC Ametek Gemco Electro-Thrust Brake Assembly ET-14NADC 
14 Inch Diameter Brake 
800 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.75 Seconds 
With Adjustable Valve 1.2 to 4.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 14 X 4.25 Inch, Finished or Pilot Bore Part E014500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
320 LBS Net, 370 LBS Gross 
Ships via Motor Freight Only
- 0 $12,007.42
11 AME-ET-16 Ametek Gemco Electro-Thrust Brake Assembly ET-16 
16 Inch Diameter Brake 
Manufactured to AIST Specifications 
1000 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.45 Seconds 
With Adjustable Valve 0.8 to 3.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
400 LBS Net, 430 LBS Gross 
Ships via Motor Freight Only 
Ships in 6 Weeks, Peck MI 
Dated 01-2021
- 0 $12,243.96
12 AME-ET-16DC Ametek Gemco Electro-Thrust Brake Assembly ET-16 
16 Inch Diameter Brake 
Manufactured to AIST Specifications 
1000 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.45 Seconds 
With Adjustable Valve 0.8 to 3.8 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 16 X 6.75 Inch, Finished or Pilot Bore Part E016500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
400 LBS Net, 430 LBS Gross 
Ships via Motor Freight Only
- 0 $12,736.42
13 AME-ET-18NA Ametek Gemco Electro-Thrust Brake Assembly ET-18NA 
18 Inch Diameter Brake 
1500 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.35 Seconds 
With Adjustable Valve 0.7 to 3.0 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
580 LBS Net, 610 LBS Gross 
Ships via Motor Freight Only  
Dated 06-2022
- 0 $15,949.00
14 AME-ET-18NA DC Ametek Gemco Electro-Thrust Brake Assembly ET-18NADC 
18 Inch Diameter Brake 
1500 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC, Shunt Wound Only, required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.35 Seconds 
With Adjustable Valve 0.7 to 3.0 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 18 X 8.50 Inch, Finished or Pilot Bore Part BH181001 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
580 LBS Net, 610 LBS Gross 
Ships via Motor Freight Only
- 0 $15,221.50
15 AME-ET-19 Ametek Gemco Electro-Thrust Brake Assembly ET-19 
19 Inch Diameter Brake 
Manufactured to AIST Specifications 
2000 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.35 Seconds 
With Adjustable Valve 0.7 to 3.0 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
640 LBS Net, 670 LBS Gross 
Ships via Motor Freight Only
- 0 $15,275.52
16 AME-ET-19NA Ametek Gemco Electro-Thrust Brake Assembly ET-19NA 
19 Inch Diameter Brake 
1600 LB FT Brake Torque, Continuous Rating 
Adjustable Torque with Scale Indicator 
230 Volt DC is required to release the brake 
Spring Applied Electrohydraulic Release for Fail Safe Operation 
-13 thru 104 Degrees F with Standard Thruster Fluid 
Brake Setting Times Without Adjustable Valve 0.35 Seconds 
With Adjustable Valve 0.7 to 3.0 Seconds 
Engineered to apply softly and slowly to avoid swinging loads 
This brake is not designed for hoist applications 
Options available at additional cost include: 
Brake Wheel 19 X 8.75 Inch, Finished or Pilot Bore Part E019500 
Self Adjusting Mechanism for Lining Wear 
Limit Switches for Set and Release contacts 
Silicon Fluid for low temperature applications, -40 Degrees F 
Brake Hand Release Lever, specify latching or non-latching lever 
Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat 
640 LBS Net, 670 LBS Gross 
Ships via Motor Freight Only 
Pricing on request
- 0 Call   Call
GEMCO ETH Electro-Thrust Shoe Brakes
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-ETH-08 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 100 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $7,159.31
2 AME-ETH-08NA-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 160 LB FT, 230 Volt DC Motor, Built to AISE Specifications with the exception of the brake torque which is 60 FT LB higher than AISE specifies, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 1.1 Sec. With Adjusting Valve 1.5 to 7.2 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application (165LBS) Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $9,404.63
3 AME-ETH-08NA-DC SYSTEM Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $14,860.78
4 AME-ETH-08NA BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 160 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $7,159.31
5 AME-ETH-10-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 200 LB FT, 230 Volt DC Motor, Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # 82300014 (165LBS) - 0 $10,475.99
6 AME-ETH-10 1 BRKSYS AC Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 200 Ft LB, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. System includes: Qty. 1, ETH-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $13,197.58
7 AME-ETH-10 2 BRKSYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $26,809.88
8 AME-ETH-10 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake, 200 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 150 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters - 0 $11,695.00
9 AME-ETH-10 BRAKE SYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $15,853.30
10 AME-ETH-11 BRAKE ONLY 400 FT LBS 
Dated 1/18
- 0 $10,378.80
11 AME-ETH-13 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $9,795.59
12 AME-ETH-13 BRAKE ONLY DC Ametek Gemco spring applied, electro-hydraulically released, 13 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 230 Volt DC Shunt Wound Motor.550 FT LBS. - 0 $12,451.30
13 AME-ETH-13 BRAKE SYS Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters. System includes: Qty. 1, ET-13H Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $14,897.50
14 AME-ETH-13 BRAKE SYS DC Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 13 Inch Diameter Brake, 550 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-13 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $17,553.22
15 AME-ETH-14NA Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). The thruster includes a 230VDC motor. The brake is set up for a 14" diameter wheel which is not included. Two 10797 armored hose kits are included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included - 0 $11,793.58
16 AME-ETH-14NA-DC BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 14 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 800 LB FT, 230 Volt DC Motor, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.45 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # (300LBS) - 0 $14,449.30
17 AME-ETH-14NA BO Ametek Gemco spring applied, electro-hydraulically released, 14 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 460 / 230 Volt AC motor. 800 FT LBS. - 0 $11,803.30
18 AME-ETH-16 BRAKE ONLY Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters 01/11 - 0 $10,907.98
19 AME-ETH-16 BRAKE ONLY DC Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake.The thruster includes a 230VDC motor. The brake is set up for a 16" diameter wheel which is not included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included. - 0 $13,092.82
20 AME-ETH-16 BRAKE SYS DC Ametek Gemco spring applied, electro-hydraulically released brake system with hydraulic actuator for auxiliary manual cab control via foot pedal. 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake. The thruster includes a 230VDC Shunt Wound Motor. The brake is set up for a 16" diameter wheel which is not included. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703 - 0 $19,987.53
21 AME-ETH-16 BRAKE SYSTEM AC Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters - 0 $17,835.10
GEMCO ET/ETH Brakes Brake Shoes, Linings, Bolts and Pins
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E004047 Ametek Gemco Brake Shoe Assembly TM-43 
Part E004047 
Brake Shoe & Lining 
For a TM-43 4.5 Inch Electric Brake 
Bonded Premium Non-Asbestos Lining Material 
2 Per brake, sold each 
70 Degree Arc 
aka 645C555G02 E004047002 
Dated 01-2024 
(2LBS) H 4" L 5" W 4" Box STOCK @ BPI
- 0 $749.00
2 AME-E004070 Ametek Gemco Bolt 
Part E004070 
Hardened Brake Shoe Bolt 
For a TM-43 or TM-63 DC Brake 
aka 27D7221H04 E004070006 
Item 15, 2 per brake, sold each 
Dated 01-2024 
(1LB)
- 0 $237.00
3 AME-E006023 Ametek Gemco Brake Shoe Assembly TM 6" 
Part E006023 
aka E006023002 
For 6 Inch a TM-63, ET6 or ET6NA Brake 
Bonded Premium Non-Asbestos Lining Material 
Sold each, 2 per Brake 
70 Degree Arc 
Old Part 645C162G02 & 645C162J04 Casting # 
Normally a Stock Item @ BPI 
Ships from Stock to 4 weeks 
Dated 01-2024 
(2LBS) H 4" L 10" W 4" Box
0 $806.00
4 AME-E008025 Ametek Gemco Brake Shoe Assembly TM 8" 
Part E008025 
aka E008025002 
Brake Shoe & Lining Assembly 
For an 8 Inch TM-83 or ET-8 Brake 
Item 14, 2 per brake, sold each 
Premium Bonded, Non-Asbestos Material 
Old WEST 439C314G02 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(3LBS) H 4" L 8" W 4" Box
0 $880.00
5 AME-E010047 Ametek Gemco Brake Shoe Assembly TM 10" 
Part E010047 
aka E0100470002 
Old Part 635C292G01 
For a 10 Inch TM-1035 or ET-10 Brake 
Item 14 
2 per brake, sold each 
Premium OEM Non-Asbestos Bonded Lining Material 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(5LBS) H 4" L 10" W 4" Box
0 $1,060.00
6 AME-E010107 Ametek Gemco Shoe & Lining CB 10" 
Part E010107 
aka E010107006 
Old Part 254C27G04 
Outer Brake Shoe 
For a CB-160 10 Inch Electric Brake 
Bonded Premium Non-Asbestos Lining Material  
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(15LBS)
0 $1,807.00
7 AME-E010108 Ametek Gemco Lining & Rivet Kit CB160 
Part E010108 
aka E010108005 
Old Part 3279B95G04 
For a 10 Inch CB-160 Solenoid Brake 
Premium OEM Non-Asbestos Drilled Linings 
Qty. 2, with 6 Drilled and Countersunk Holes & 18 Brass Push Pins 
Linings for 2 Brake Shoes - 1 Pair 
Normally a Stock Item at BPI 
Ships from our Stock to 2 Weeks 
C. F. for Pricing 
Dated 01-2024 
(2LBS) H 4" L 8" W 4" Box
- 6 $2,529.80
8 AME-E013025 Ametek Gemco Brake Shoe & Lining TM13 
Part E013025 
aka E013025002 
Old Part 439C201G01  
For a 13 Inch TM1355 or ET13 Brake 
Item 14, 2 per brake, sold each 
Bonded, Premium Non-Asbestos Lining Material 
Normally a Stock item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(12LBS) H 8" L 12" W 8" Box
- 0 $1,275.00
9 AME-E013053 Ametek Gemco Bolt TM1355 
Part E013053 
aka E013053006 
Old Part 24D6387G04  
Hardened Brake Shoe Bolt Assembly 
For 13 Inch TM-1355 DC Brake 
Item 16, 2 per brake, sold each 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(5LBS)
- 0 $367.00
10 AME-E016025 Ametek Gemco Brake Shoe Assembly TM 16" 
Part E016025 
aka E016025002 
Old Part 635C227G01 
For a 16 Inch TM-1665 or ET-16 Brake 
Premium Non-Asbestos Material Bonded to the Brake Shoe 
Item 14, 2 per brake, sold each 
Dated 01-2024 
(31LBS) H 12" L 10" W 12" Box
0 $1,698.00
11 AME-E016027 Ametek Gemco Bolt 
Part E016027 
Old Part 24D6387G03 
Brake Shoe Bolt 
For a 16 Inch TM-1655 & ET-16 Brake 
Includes Hardened Bolt 
Nut & Pin 
Item 16, 2 per brake, sold each 
Ships in 3 Weeks, Peck MI 
Dated 01-2024 
(8LBS) H 4" L 8" W 4" Box
- 0 $420.00
12 AME-E019024 Ametek Gemco Brake Shoe Assembly TM 19" 
Part E019024 
aka E019024002 
aka Old Part 439C394G01 
Brake Shoe & Lining Assembly 
For a 19 Inch TM-1985 or ET-19 Brake 
Premium,Non-Asbestos Lining Material 
Bonded to the Brake Shoe  
Qty. 1, 2 per brake, sold each 
Item 14 
Normally a Stock Item @ BPI 
Ships from Stock to 6 Weeks 
Dated 01-2024 
(45LBS) H 12" L 20" W 12" Box
- 0 $2,192.00
13 AME-E019027 Ametek Gemco Brake Shoe Bolt 
Part E019027 
For a TM-1985 or ET19 Brake Shoe 
Item 16, 2 per brake, sold each 
1.25 Inch Dia 
10.5 Inch Long 
Threaded both ends 
1 end has pin hole, Nut for use with pin, 1 pin 
Nut is on & pinned 
C. F. for Pricing 
Dated 01-2024 
aka 24D6387G01 
(5 LBS)
- 0 Call   Call
14 AME-E019065 Ametek Gemco Lining Kit 19" 
Part E019065 
aka E019065005 
Old Part 861C691G20 439C394H02 
For a 19 Inch TM-1985 DC Brake 
Pair of Drilled & Countersunk Linings 
Includes 26 Rivets 10-18, 24 Required 
Also available undrilled for bonded brake shoes 
Premium Non Asbestos Material 
MSDS Sheets Available 
Ships from Stock to 3 Weeks 
C. F. for Pricing 
Dated 01-2024 
(10LBS) H 10" L 18" W 10" Box
1 Call   Call
15 AME-E023025 Ametek Gemco Brake Shoe & Lining TM23 
Part E023025 
aka E023025999 
Old Part 635C316G01 
For a 23 Inch TM-2311 DC Brake 
Item 14, 2 per brake, sold each 
Premium Bonded, Non-Asbestos Material 
Ships in 10 to 11 Weeks, Peck MI 
C. F. for Pricing 
Dated 01-2024
- 0 Call   Call
16 AME-E023028 Ametek Gemco Brake Shoe Bolt TM-2311 
Part E023028 
aka E023028002 
Hardened Brake Shoe Bolt 
For Mounting the Brake Shoes 
Includes Bolt Nut & Lockwasher 
For a 23 Inch TM-2311 DC Brake 
Item 16, 2 per Brake, sold each 
Old WEST 24D6387G02 
Ships in 4 Weeks 
C. F. for Pricing 
Dated 01-2024 
(12LBS) H 4" L 12" W 4" Box
- 0 Call   Call
17 AME-E030040 Ametek Gemco Bolt, Hardened Brake Shoe Bolt Assembly for a TM-3014 30 Inch Brake. Includes the Hex Nut. Ref. # 16, 2 per brake but sold individually, 450A869G01  
C. F. for Pricing 
Dated 01-2024
- 0 Call   Call
 
GEMCO ET Brakes Replacement Parts
 

GEMCO ET8 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E008025 Ametek Gemco Brake Shoe Assembly TM 8" 
Part E008025 
aka E008025002 
Brake Shoe & Lining Assembly 
For an 8 Inch TM-83 or ET-8 Brake 
Item 14, 2 per brake, sold each 
Premium Bonded, Non-Asbestos Material 
Old WEST 439C314G02 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(3LBS) H 4" L 8" W 4" Box
0 $880.00
2 AME-E010070 Ametek Gemco Bolt. Brake Shoe Bolt Assembly 
Hardened Bolt with Nut, Lockwasher & Cotter Pin 
For a TM-83, TM-1035 & ET-10 Brake 
2 per brake, sold each 
aka 27D7221H14 
Dated 01-2024
- 2 $243.00
3 AME-PSD0146500 Ametek Gemco Repair Kit Thruster 
Part PSD0146500 
Repair - Seal Kit 
For Thruster Assemblies: 
PSD0151705 
PSD0148317 
PSD0148305 
PSD0165807 
PSD0175907 
Brakes: 
ET8, ET10 ET11 & ET11NA 
Item 8A 
Ships in 6 to 8 Weeks, Peck MI 
Dated 10-2021 
(2LBS) H 4" L 6" W 4" Box
0 $6,419.52
GEMCO ET10 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E010047 Ametek Gemco Brake Shoe Assembly TM 10" 
Part E010047 
aka E0100470002 
Old Part 635C292G01 
For a 10 Inch TM-1035 or ET-10 Brake 
Item 14 
2 per brake, sold each 
Premium OEM Non-Asbestos Bonded Lining Material 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(5LBS) H 4" L 10" W 4" Box
0 $1,060.00
2 AME-E010070 Ametek Gemco Bolt. Brake Shoe Bolt Assembly 
Hardened Bolt with Nut, Lockwasher & Cotter Pin 
For a TM-83, TM-1035 & ET-10 Brake 
2 per brake, sold each 
aka 27D7221H14 
Dated 01-2024
- 2 $243.00
3 AME-E010309 Ametek Gemco Tie Rod Assembly for an ET-10 Brake - 1 $406.08
4 AME-E010286 Ametek Gemco Self Adjust Assembly Kit for an ET10 Brake - 0 $1,427.76
5 AME-PSD0146500 Ametek Gemco Repair Kit Thruster 
Part PSD0146500 
Repair - Seal Kit 
For Thruster Assemblies: 
PSD0151705 
PSD0148317 
PSD0148305 
PSD0165807 
PSD0175907 
Brakes: 
ET8, ET10 ET11 & ET11NA 
Item 8A 
Ships in 6 to 8 Weeks, Peck MI 
Dated 10-2021 
(2LBS) H 4" L 6" W 4" Box
0 $6,419.52
6 AME-E010266 Ametek Gemco Spring. Main Spring on a ET-10 Brake - 0 $71.28
7 AME-E010312 Ametek Gemco Pin Kit for an ET-10 Thruster Brake. Includes Base Pins & Top Pins with Retaining Rings - 0 $304.56
GEMCO ET13 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E013194 Ametek Gemco Base / Frame 
Part E013194 
For a 13 Inch ET-13 Thruster Brake  
Item 1, 1 per brake 
Dated
- 0 $2,292.84
2 AME-E013025 Ametek Gemco Brake Shoe & Lining TM13 
Part E013025 
aka E013025002 
Old Part 439C201G01  
For a 13 Inch TM1355 or ET13 Brake 
Item 14, 2 per brake, sold each 
Bonded, Premium Non-Asbestos Lining Material 
Normally a Stock item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(12LBS) H 8" L 12" W 8" Box
- 0 $1,275.00
3 AME-E013053 Ametek Gemco Bolt TM1355 
Part E013053 
aka E013053006 
Old Part 24D6387G04  
Hardened Brake Shoe Bolt Assembly 
For 13 Inch TM-1355 DC Brake 
Item 16, 2 per brake, sold each 
Normally a Stock Item @ BPI 
Ships from Stock to 3 Weeks 
Dated 01-2024 
(5LBS)
- 0 $367.00
4 AME-PM0139600 Ametek Gemco Arm. Outer Shoe Arm on a ET13 Brake. 1 Pair. Item 4 4/7 - 0 $597.24
5 AME-E013228 Ametek Gemco Tie Rod Assembly 
Part E013228 
For a 13 Inch ETH-13EB50 Thruster Brake 
Item 5, 1 per brake 
Dated
- 1 $457.92
6 AME-E013240 Ametek Gemco Tie Rod Assembly 
Part E013240 
Self Adjust Tie Rod Assembly 
For a 13 Inch ET-13 Thruster Brake with the Self Adjust Option 
Item 5A, 1 per brake 
Dated
- 0 $1,469.88
7 AME-E013225 Ametek Gemco Arm 
Part E013225 
Inner Shoe Arm 
For a 13 Inch ET-13 Thruster Brake 
Item 6 / 1 Pair 
Dated
- 0 $711.72
8 AME-E013229 Ametek Gemco Force Arm Assembly 
Part E013229 
For a 13 Inch ET-13 Thruster Brake 
Item 7, 1 per brake 
Dated
- 0 $361.80
9 AME-PSD0146500 Ametek Gemco Repair Kit Thruster 
Part PSD0146500 
Repair - Seal Kit 
For Thruster Assemblies: 
PSD0151705 
PSD0148317 
PSD0148305 
PSD0165807 
PSD0175907 
Brakes: 
ET8, ET10 ET11 & ET11NA 
Item 8A 
Ships in 6 to 8 Weeks, Peck MI 
Dated 10-2021 
(2LBS) H 4" L 6" W 4" Box
0 $6,419.52
10 AME-E013231 Ametek Gemco Pin Kit for a ET-13 Brake. Includes Base Pins and Top Pins with Retaining Rings. Item 10 - 0 $406.08
GEMCO ET16 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E016025 Ametek Gemco Brake Shoe Assembly TM 16" 
Part E016025 
aka E016025002 
Old Part 635C227G01 
For a 16 Inch TM-1665 or ET-16 Brake 
Premium Non-Asbestos Material Bonded to the Brake Shoe 
Item 14, 2 per brake, sold each 
Dated 01-2024 
(31LBS) H 12" L 10" W 12" Box
0 $1,698.00
2 AME-E016027 Ametek Gemco Bolt 
Part E016027 
Old Part 24D6387G03 
Brake Shoe Bolt 
For a 16 Inch TM-1655 & ET-16 Brake 
Includes Hardened Bolt 
Nut & Pin 
Item 16, 2 per brake, sold each 
Ships in 3 Weeks, Peck MI 
Dated 01-2024 
(8LBS) H 4" L 8" W 4" Box
- 0 $420.00
3 AME-PSD0146500 Ametek Gemco Repair Kit Thruster 
Part PSD0146500 
Repair - Seal Kit 
For Thruster Assemblies: 
PSD0151705 
PSD0148317 
PSD0148305 
PSD0165807 
PSD0175907 
Brakes: 
ET8, ET10 ET11 & ET11NA 
Item 8A 
Ships in 6 to 8 Weeks, Peck MI 
Dated 10-2021 
(2LBS) H 4" L 6" W 4" Box
0 $6,419.52
GEMCO ET19 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E019024 Ametek Gemco Brake Shoe Assembly TM 19" 
Part E019024 
aka E019024002 
aka Old Part 439C394G01 
Brake Shoe & Lining Assembly 
For a 19 Inch TM-1985 or ET-19 Brake 
Premium,Non-Asbestos Lining Material 
Bonded to the Brake Shoe  
Qty. 1, 2 per brake, sold each 
Item 14 
Normally a Stock Item @ BPI 
Ships from Stock to 6 Weeks 
Dated 01-2024 
(45LBS) H 12" L 20" W 12" Box
- 0 $2,192.00
2 AME-E019027 Ametek Gemco Brake Shoe Bolt 
Part E019027 
For a TM-1985 or ET19 Brake Shoe 
Item 16, 2 per brake, sold each 
1.25 Inch Dia 
10.5 Inch Long 
Threaded both ends 
1 end has pin hole, Nut for use with pin, 1 pin 
Nut is on & pinned 
C. F. for Pricing 
Dated 01-2024 
aka 24D6387G01 
(5 LBS)
- 0 Call   Call
3 AME-PSD0146500 Ametek Gemco Repair Kit Thruster 
Part PSD0146500 
Repair - Seal Kit 
For Thruster Assemblies: 
PSD0151705 
PSD0148317 
PSD0148305 
PSD0165807 
PSD0175907 
Brakes: 
ET8, ET10 ET11 & ET11NA 
Item 8A 
Ships in 6 to 8 Weeks, Peck MI 
Dated 10-2021 
(2LBS) H 4" L 6" W 4" Box
0 $6,419.52
GEMCO ET23 Brakes Replacement Parts
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-E023025 Ametek Gemco Brake Shoe & Lining TM23 
Part E023025 
aka E023025999 
Old Part 635C316G01 
For a 23 Inch TM-2311 DC Brake 
Item 14, 2 per brake, sold each 
Premium Bonded, Non-Asbestos Material 
Ships in 10 to 11 Weeks, Peck MI 
C. F. for Pricing 
Dated 01-2024
- 0 Call   Call
2 AME-E023028 Ametek Gemco Brake Shoe Bolt TM-2311 
Part E023028 
aka E023028002 
Hardened Brake Shoe Bolt 
For Mounting the Brake Shoes 
Includes Bolt Nut & Lockwasher 
For a 23 Inch TM-2311 DC Brake 
Item 16, 2 per Brake, sold each 
Old WEST 24D6387G02 
Ships in 4 Weeks 
C. F. for Pricing 
Dated 01-2024 
(12LBS) H 4" L 12" W 4" Box
- 0 Call   Call
3 AME-PSD0146500 Ametek Gemco Repair Kit Thruster 
Part PSD0146500 
Repair - Seal Kit 
For Thruster Assemblies: 
PSD0151705 
PSD0148317 
PSD0148305 
PSD0165807 
PSD0175907 
Brakes: 
ET8, ET10 ET11 & ET11NA 
Item 8A 
Ships in 6 to 8 Weeks, Peck MI 
Dated 10-2021 
(2LBS) H 4" L 6" W 4" Box
0 $6,419.52
Secure Online Order
 

 
Secure Online Order
 
14,361 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 

Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 RLS
  • 2006 RLS
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
MSDS
   - MSDS Information
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
  ACH Form: Word   /   PDF
Supplier of Industrial Brake Parts Since 1985
This web site: Owned and operated by Brake Products, Inc.
Designed and maintaned by Internet and Database Software, Inc.