Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 48,046 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,353 part numbers: Motion Control Products     GLEASON 17,990 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,205 part numbers: Cable & Hose Management Systems             CUTLER-HAMMER 916 part numbers: Electrical Control Products   HUBBELL 8,396 part numbers: Electrical Control Products   SUPERBOLT 122 part numbers: Fastening Solutions   RENOLD 406 part numbers: Mechanical Power Transmission Products

 

AUTOMATIC QUANTITY DISCOUNTS   BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.   Quotation is valid for 30 days and can be immediately converted into an order.

 

CREDIT TERMS CHANGES   Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

GemcoDirect Online Order
 

Database Lookup:     By Part Number By Description
Total 14353 part numbers listed in this database. Shown in 450 pages by 32 items.
Pages:   Prev,   Next,   403  404  405  406  407  408  409  410  411  412  413  414  415  416  417  418  419  420  421  422  423
Part Number	Product Category	Description	Image	Stock Qty	Weight (lbs.)	Price (US$)	Order Quantity
AME-ET-6NA	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly ET-6NA  6 Inch Diameter Brake  60 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 6 X 3.125, Finished or Pilot Bore Part E006500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships in 6 Weeks  Dated 06-2022  Ships via Motor Freight Only   120 LBS Net, 150 LBS Gross	-	1	0.00	5,201.00
AME-ET-8	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly  Part ET-8  8 Inch Diameter Brake  Manufactured to AIST Specifications  100 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships from Stock to 5 Weeks  Motor Freight Only  140 LBS Net, 170 LBS Gross  Dated 1-2020	-	1	0.00	5,282.28
AME-ET-8DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly   Part ET-8DC  Manufactured to AIST Specifications  8 Inch Diameter Brake  100 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 Volt DC, Shunt Wound Only, required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  140 LBS Net, 170 LBS Gross  Ships via Motor Freight Only  Dated 1/18	-	0	0.00	7,850.52
AME-ET-8NA	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly  Part ET-8NA  8 Inch Diameter Brake  160 LB FT Brake Torque, Continuous Rating  Adjustable Torque with Scale Indicator  230 / 460 VAC, 3 Phase, 60 Hz. required to release the brake  Spring Applied Electrohydraulic Release for Fail Safe Operation  -13 thru 104 Degrees F with Standard Thruster Fluid  Brake Setting Times Without Adjustable Valve 1.1 Seconds  With Adjustable Valve 1.5 to 7.2 Seconds  Engineered to apply softly and slowly to avoid swinging loads  This brake is not designed for hoist applications  Options available at additional cost include:  Brake Wheel 8 X 3.25 Inch, Finished or Pilot Bore Part E008500  Self Adjusting Mechanism for Lining Wear  Limit Switches for Set and Release contacts  Silicon Fluid for low temperature applications, -40 Degrees F  Brake Hand Release Lever, specify latching or non-latching lever  Enclosures NEMA 4 & NEMA 3R & Strip Heater / Thermostat  Ships via Motor Freight Only   140 LBS Net, 170 LBS Gross  Ship in 6 to 8 Weeks, Peck MI  Dated 06-2022	-	3	0.00	5,660.00
AME-ETH-08 BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 100 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters	-	0	0.00	7,159.31
AME-ETH-08NA BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 160 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 1.10 Seconds. With Adjusting Valve 1.5 to 7.2 Seconds to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 140 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters	-	0	0.00	7,159.31
AME-ETH-08NA-DC BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 160 LB FT, 230 Volt DC Motor, Built to AISE Specifications with the exception of the brake torque which is 60 FT LB higher than AISE specifies, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 1.1 Sec. With Adjusting Valve 1.5 to 7.2 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application (165LBS) Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	9,404.63
AME-ETH-08NA-DC SYSTEM	Gemco Parts	Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	14,860.78
AME-ETH-10 1 BRKSYS AC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 200 Ft LB, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. System includes: Qty. 1, ETH-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	13,197.58
AME-ETH-10 2 BRKSYS DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	26,809.88
AME-ETH-10 BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake, 200 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release or Electrohydraulically Released and Control Cylinder / Hydraulically Applied via an existing hydraluc brake system, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoisting applications. 150 LBS + skid. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters	-	0	0.00	11,695.00
AME-ETH-10 BRAKE SYS DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 10 Inch Diameter Brake, 200 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	15,853.30
AME-ETH-10-DC BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 10 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 200 LB FT, 230 Volt DC Motor, Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # 82300014 (165LBS)	-	0	0.00	10,475.99
AME-ETH-11 BRAKE ONLY	Gemco Parts	400 FT LBS  Dated 1/18	-	0	0.00	10,378.80
AME-ETH-13 BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	9,795.59
AME-ETH-13 BRAKE ONLY DC	Gemco Parts	Ametek Gemco spring applied, electro-hydraulically released, 13 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 230 Volt DC Shunt Wound Motor.550 FT LBS.	-	0	0.00	12,451.30
AME-ETH-13 BRAKE SYS	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 13 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 550 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 250 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters. System includes: Qty. 1, ET-13H Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	14,897.50
AME-ETH-13 BRAKE SYS DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 13 Inch Diameter Brake, 550 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-13 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	17,553.22
AME-ETH-14NA	Gemco Parts	Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). The thruster includes a 230VDC motor. The brake is set up for a 14" diameter wheel which is not included. Two 10797 armored hose kits are included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included	-	0	0.00	11,793.58
AME-ETH-14NA BO	Gemco Parts	Ametek Gemco spring applied, electro-hydraulically released, 14 inch brake assembly with hydraulic slave actuator for auxiliary manual cab control via the existing Wagner hydraulic brake system. The hydraulic thruster is powered by a 460 / 230 Volt AC motor. 800 FT LBS.	-	0	0.00	11,803.30
AME-ETH-14NA-DC BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 14 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 800 LB FT, 230 Volt DC Motor, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times; Without Adjusting Valve 0.45 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters # (300LBS)	-	0	0.00	14,449.30
AME-ETH-16 BRAKE ONLY	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a existing Wagner hydraulic brake system., 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters 01/11	-	0	0.00	10,907.98
AME-ETH-16 BRAKE ONLY DC	Gemco Parts	Ametek Gemco spring applied, electro-hydraulically released brake assembly with hydraulic actuator for auxiliary manual cab control via foot pedal (sold separately). 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake.The thruster includes a 230VDC motor. The brake is set up for a 16" diameter wheel which is not included. A fluid reservoir bleeder is required, but not included. A manual hydraulic foot pedal control cylinder is required, but not included.	-	0	0.00	13,092.82
AME-ETH-16 BRAKE SYS DC	Gemco Parts	Ametek Gemco spring applied, electro-hydraulically released brake system with hydraulic actuator for auxiliary manual cab control via foot pedal. 1000 LB / FT. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake. The thruster includes a 230VDC Shunt Wound Motor. The brake is set up for a 16" diameter wheel which is not included. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	19,987.53
AME-ETH-16 BRAKE SYSTEM AC	Gemco Parts	Ametek Gemco Electro-Thrust Brake Assembly, 16 Inch Diameter Brake with hydraulic slave actuator for auxiliary manual cab control via a foot pedal. 1000 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.45 Sec. With Adjusting Valve 0.8 to 3.8 Sec. to softly apply the brake, Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. System includes: Qty. 1, ETH-16 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703400 LBS + skid. Options available at additional cost include: Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures and strip heaters	-	0	0.00	17,835.10
AME-ETH-8 BRAKE SYS DC	Gemco Parts	Ametek Gemco Electro-Thrust Brake System with Hydraulic Cab Control. 8 Inch Diameter Brake, 100 LB FT, 230 VDC Shunt Wound Motor. Built to AISE Specifications, Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.3 to 7.3 Sec. to softly apply the brake, hydraulic actuator for auxiliary cab control for a progressive hydraulic brake pedal actuation. System includes: Qty. 1, ET-10 Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703	-	0	0.00	15,765.82
AME-F000017	Gemco Parts	Ametek Gemco Gasket   Part F000017  aka F17   Copper Gasket  Used with J010160 Armored Hose & Adaptor & Outlet Plugs  Ships from Stock to 2 Weeks  Dated 1-19  (1LB) H 4" L 5" W 4" Box		853	0.00	1.72
AME-F000602	Gemco Parts	Ametek Gemco Gasket  Part F000602  aka F000602998 F602  Copper Gasket  Ships from BPI Stock  Dated 01-2024  (1LB) H 4" L 5" W 4" Box		8	0.00	14.00
AME-F000603	Gemco Parts	Ametek Gemco Gasket  Part F000603  aka F000603998 F603  Copper Gasket  Ships from BPI Stock  Dated 01-2024  (1LB) H 4" L 5" W 4" Box		15	0.00	14.00
AME-F000673	Gemco Parts	Ametek Gemco Bolt   Part F000673  Bolt For Swivel Fitting  aka F000673999  Dated 01-2024  (1LB) H 4" L 5" W 4" Box	-	8	0.00	29.00
AME-F000996	Gemco Parts	Ametek Gemco Plug  Part F000996  aka F000996999 F996  Adaptor Outlet Plug  Dated 01-2023  For Plugging Actuators & Control Cylinders  Used with F00017 Gasket & F006446 Bleeder   Which are sold separately  Ships from Stock  Dated 01-2021  (1LB) H 4" L 5" W 4" Box		106	0.00	33.00
AME-F002395	Gemco Parts	Ametek Gemco Boot  Part F002395  Actuator Boot  For Brake Actuating / Slave Cylinders  J007905, J023437 & J008765  Item 11  Dated 01-2024  (1LB) H 4" L 8" W 4" Box	-	17	0.00	51.00

Prices are subject to change without notice. Last updated: 28-Oct-2024 05:54:38 AM (EST)

Secure Online Order     Secure Online Order   part numbers available for online order   Shopping Cart Empty Checkout is secure   Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes • MSDS    - MSDS Information

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9   ACH Form: Word   /   PDF Supplier of Industrial Brake Parts Since 1985 This web site: Owned and operated by Brake Products, Inc. Designed and maintaned by Internet and Database Software, Inc.