TELEMOTIVE 2,498 part numbers: Radio Remote Control
RENOLD 406 part numbers: Mechanical Power Transmission Products
AUTOMATIC QUANTITY DISCOUNTS
BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.
Quotation is valid for 30 days and can be immediately converted into an order.
CREDIT TERMS CHANGES
Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold.
New customer payment terms are "Credit Card" only, full pre-pay.
Credit Card information needs recorded at the time of order.
Terms can be re-negotiated, upon successful payment.
Shut Height Monitor - The Series 2110 Shut Height Monitor gives you a highly accurate readout of shut height as you
jog the shut height motor or manually adjust the shut height mechanism. Once proper shut height is determined, the readout can be recorded for
use the next time the die is used in the same press, significantly reducing setup time and the number of test parts. Position accuracy of the
2110 is +/-.001". The 2110 unit can be used with our Series 1986 Resolver Assembly, 1986MD Resolver with Mill Duty Housing, Series 951 Quik Stik
II Linear Transducer, Series 953 VMax Linear Transducer, and the 952 BlueOx Linear Transducer.
FEATURES
• Modular Design
• Six (6)/Seven (7) Segment Large Display
• Ten (10) Segment LED Bar Graph
• Two (2) Serial Communication Ports
• Digital Input for Run/Program Selector Switch
• Optional Relay Board
• Variable Pulse L.D.T. Input Module Board
• Control Pulse L.D.T. Input Module Board
• Resolver Input Module Board
• Designed to: UL 508 Specifications
Interface Module - The Series 2120 PLC Interface Module is an accurate, absolute position sensing device for use with rugged, noise immune
transducers in harsh environments. It can be used as a simple indicator of position or as a PLC Interface Module generating digital signals, as
well as serial and analog outputs to feed PLC's.
The Series 2120 PLC Interface Module improves on our popular Series 1994R and 1994L PLC Interface modules. In fact, the Series 2120 combines all
the features of the Series 1994 into one unit with many added features our customers requested. The Series 2110 and 2120 can be interfaced with
a Series 951, Series 952, Series 955, and a Series 925.
SPECIFICATIONS
Power Requirements: 85-265 VAC 50/60 Hz; internally fused at 1.5 Amps Temperature: Operating: 32o to 131o F; Storage: 0o to 150o F Environment: Humidity: 5% to 95%; Non-condensing Shock & Vibration: Tested to MIL-Std 810E, Method 514.4, Category 10, 20-2K Hz, 2G sine, 0.04 G2/Hz random, UL 491, 5A 19, 10-150 Hz, 10G sine Electromagnetic Compatibility: Tested to: IEC 801-2, Level 5 (electrostatic discharge requirements);IEC 801-4, Level 4 (Electrical fast transient/burst requirements);IEC 801-5, Level 3.5 (Surge immunity requirements) Digital Outputs: TTL/CMOS @ 24 mA, 24V sinking/sourcing @ 200 mA, Update time: 50 microseconds Analog Outputs: +/- 10 VDC into 2K ohm; 4/20 mA (sourcing) into 500 ohm; Update time: 5mS Memory Retention Time: Maintains last programmed values to ten years without power Relay Contact Ratings: All relays rated UL & CSA for 1/4 HP, 125 to 250 VAC; 8A 250 VAC, 30 VDC, Shock Resistant to 10G Movement Input: 85 - 265 VAC, 12 mA (rms) max; optical isolated to 3200 VDC/2250 VAC Program Mode Key Input: Dry contact; Open collector (drain) ONLY; +5 VDC Max. - current 0.2 mA RS232 Output: 115.2 K baud RS485 Output: 115.2 K baud
DeviceNet Resolver Interface Module - The 1990DN Resolver Interface Module plugs in as a node on any control system or a DeviceNet Scanner Card.
Continuous rotary position data is provided with 23-bit resolution. In addition, eight built-in user programmable set-points allow direct control
of critical functions. All programming is done over the DeviceNet network. This product can be used with the Series 1986 Resolver.
SPECIFICATIONS
Resolution - 12 bit (4096 Counts)
Power Requirements - 92mA @ 11 VDC Typical, 67mA @ 24 VDC Typical
Inrush - 350mA @ 11 VDC for 20 msec., 450mA @ 25 VDC for 10 msec.
Device Type - Generic
Communications - Group 2 slave only
Messages Supported - Polled, Bit Strobed, Explicit Temperature
Operating -20o C to 70o C
Storage -40o C to 85o C
Scale Factor - 2 to 4096
Position Range - 0 to 1 less than Scale Factor Update Rates
Position - 915microseconds
RPM - 29.29mS
Specifications may change without notice
Interface Card - The Series 1746L Transducer Interface Card incorporates Allen-Bradley licensed technology for complete compatibility with A-B
Series 1746 I/O chassis. The unit monitors machine position and delivers continuous absolute position data to the SLC processor in inches to
0.001" or in millimeters to 0.01 millimeters and velocity data. This high resolution is accomplished without the need for re-circulations
for improved system response time. This product can be used with the Series 951 Quik-Stik II LDT, Series 952 BlueOx LDT, Series 953 VMax, and
the 955S Smart BRIK LDT.
Note: This product had been discontinued in the beginning of 2016.
Resolver-based PLS, Micro-set Programmable Limit Switch - The Series 1995A PLS was designed for use in rotary application. It incorporates many
features for safe, efficient operation. The completely self-contained unit can operate up to 30 independent outputs (six standard) based on the
rotary position of the resolver. It offers an on-line "fault check" that provide an automatic, in process mechanism to verify that all
major programmable limit switch functions are operating properly, The "fault check" output can be energized by activating the
fault-check enable input. The output is a mechanical relay that is energized during normal operation, having 1 N.O. and 1 N.C. contact. This unit
can be used with our Series 1986 Resolver Assembly. Enclosure options include Nema 4 and Nema 12.
Micro-set Programmable Limit Switch with Brake Monitor - The Series 1995B Micro-Set PLS was designed for use in the mechanical press industry.
It incorporates many features for safe, efficient press automation. This completely self-contained unit can turn up to 30 independent outputs on
or off based on the rotary position of the press crank. On-line brake monitoring checks the stopping time of the press against a customer-selected
preset stopping time. It can also be used to check the stopping distance at any point in the stroke. A dedicated mechanical SPDT relay remains
energized when stopping time is within tolerance. Once exceeded, the mechanical relay de-energizes to initiate a stoppage or warning signal. This
unit can be used with our Series 1986 Resolver Assembly. Enclosure options include Nema 4 and Nema 12.
The Series 1995L Micro-Set PLS was designed for use in linear machine control applications. It incorporates many features for safe, efficient
machine automation. This completely self-contained unit can turn up to 30 independent outputs on or off based on the position of a linear
displacement transducer or feedback from other analog devices such as pressure transducers, potentiometers, etc. It offers 0-10 VDC input with a
built-in +/- 15 VDC power supply for feed to a linear displacement transducer. Other input voltages are available for use with other devices. The
1995L can be used with our Series 955 Brik Linear Transducer, our Series 951 Quik Stik II Linear Transducer, our Series 952 BlueOx Linear
Transducer, and our Series 953 VMax Linear Transducer.
Quik-Set III Multi-turn PLS - The Quik-Set III is a fully integrated microcomputer-based Programmable Limit Switch with a convenient keypad for
programming each independent output circuit to open or close at the desired settings. The system allows precise position control of either rotary
or linear motion through the keypad or by a remote programmable controller, computer or via any remote serial data link using RS-232 or RS-422.
The Quik-Set III PLS is a pilot device used for industrial applications such as material handling, assembly machines, mechanical presses,
packaging machines, steel mills, and many other applications where accurate repetitive and sequential operations are required in control
circuitry.
Quik-Set IV UHS Programmable Limit Switch - The Series 1991 PLS is an ultra high-speed programmable limit switch designed to provide set point
control in high-speed machine applications. Its hardware driven logic circuits operate at a throughput time of 10 microseconds (.00001 seconds)
on the first 16 output circuits. This allows one count accuracy on systems with 3600 counts per revolution scale factor at speeds over 1600 RPM.
Speed compensation software allows independent rates of advance or retard on the leading and trailing edge of a programmed set point. This
allows full compensation for both the on and off response time of the machine function being manipulated for precise control of its location and
duration within the machine cycle. Operation programming can be done through its keypad or remotely via RS232 or RS485 from a PLC, PC or any
computer device with two-way serial communications capability. The PLS system's position information, programs and set pint memory are
non-volatile, making it as realizable as fixed limit or proximity switches, but far more flexible.
High Speed Programmable Limit Switch - The Series 2500 PLS is a high-speed resolver based Programmable Limit Switch that monitors rotary machine
position and provides discrete limit switch outputs. These outputs are updated at a much faster rate than can be accomplished using any
conventional PLC. The 2500 PLS uses a unique easy to understand programming sequence. The traditional number buttons have been replaced with a
rotary knob and the main controller has a 2 x 24 vacuum fluorescent display along with four push-button keys for programming. The Series 2500 is
a family of PLS's that offers unparalleled flexibility. The main controller is resolver-based and consists of 8 isolated DC inputs and 8
isolated output relays, one fault check output relay and one optional brake monitor input relay.
Press-Set II - The Series 1992 Press-Set Automation Controller is designed as a modular system that allows you to select features and options to
reach the level of automation your processes require. The Series 1992 Press-Set includes a 16 channel programmable limit switch and 12
programmable and 3 static die protection inputs. The programming features allow the unit it interfaces with feeders, tonnage monitor,
lubricators and part transfer equipment. The Series 1992 Press-Set is a resolver-based system designed specifically for harsh pressroom
environments. With it's "ready-to-serve" menu, the Press-Set reduces setup time and scrap and tooling damage while increasing uptime
and improving profits and efficiency.
The standard 1996 Ram-Set consists of a transducer, transducer cable termination kit, controller, and output module.
The transducer device is a magnetostrictive linear displacement transducer (LDT for short). The LDT consists of a fixed guide
tube assembly attached to an electronics package, and a non-contacting magnet assembly that moves up and down the guide
tube. The magnet position is precisely sensed by the guide tube electronics. The guide tube assembly is attached to a fixed
member of the slide, typically at the Pitman arm. The magnet assembly is attached to a moving portion of the slide.
The output signal of the LDT is transmitted through the cable termination kit. The kit consists of strain relief fittings at the
transducer connection point, flexible cable between the transducer, and a J box mounted on the crown of the press. The J box
has quick disconnect fittings for the flexible cable and cable running to the controller.
The controller and output modules accept slide position information from the LDT, programming information, and energize outputs
to accurately position the slide to any customer selected die number.
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
Formal PDF Quotation
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
Your shopping cart is kept intact and you can still check out at a later time.
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
• Cranes
• Battery Manufacturing
• Fiberglass Winders
• Hydraulic Cylinders
• Crusher/Baler
• Stretch Hooding Machine
• Electric Arc Furnace Cover
• And more
• Actuating Cylinder
• Hydraulic Shoe Brakes
• Solenoid DC Shoe Brakes
• Solenoid AC Shoe Brakes
• Various Replacement Parts
• 1950 Series Snap Switches
• And more
This web site is owned and operated by Brake Products, Inc.
16751 Hilltop Park Place
Chagrin Falls, Ohio 44023
Phone: (440) 543-7962
Fax: (440) 543-7963
Web: www.brakeproducts.com
Email: sales@brakeproducts.com
Federal ID #: 34-1473351
CAGE Code: 1QTP8
DUNS# 14-748-2392
Download: Form W-9
ACH Form: Word / PDF
