Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
62,610 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,367 part numbers: Motion Control Products
 
  GLEASON
17,958 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
3,182 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,359 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,742 part numbers: Motor Mounted Brakes
  HUBBELL
8,387 part numbers: Electrical Control Products
  SUPERBOLT
117 part numbers: Fastening Solutions
  TELEMOTIVE
2,497 part numbers: Radio Remote Control
  RENOLD
406 part numbers: Mechanical Power Transmission Products
 
AUTOMATIC QUANTITY DISCOUNTS
 
BPI's web orders and web site generated PDF quotations now support quantity discount of up to 10%.
 
Quotation is valid for 30 days and can be immediately converted into an order.

 
 
CREDIT TERMS CHANGES
 
  1. Any account with invoices outstanding for more than 60 days will automatically be put on a credit hold.
  2. New customer payment terms are "Credit Card" only, full pre-pay. Credit Card information needs recorded at the time of order. Terms can be re-negotiated, upon successful payment.
 
Web: www.GemcoDirect.com Email: sales@GemcoDirect.com Phone: (888) 861-8777
 
Linear Displacement Transducers
955DQ BRIK Gen III LDT
 
DESCRIPTION
 
The 955DQ BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. It is available in analog, digital, and quadrature outputs. The 955DQ BRIK is an accurate, auto-tuning, non-contact linear displacement transducer in an economical, low profile package with direct quadrature output.
 
SPECIFICATIONS
Input Voltage- 13.5 to 30 VDC
Current Draw- 2.5 Watts Maximum, 120 mA @ 15 VDC Typical
Output- Quadrature Output A+, A-, B+, B-, Z+, Z-Line Drivers: 5V or Input Power
Resolution- 0.001"
Non-Linearity- +/- 0.05% of Stroke
Repeatbility- +/- 0.006% of Full Stroke
Hysteresis- +/- 0.02% of Full Scale
50" or less - 1mS (Stroke Lengths 5" - 50")
51" to 100" - 2mS (Stroke Lengths 51" - 100")
101" to 150" - 3mS (Stroke Lengths 101" - 150")
151" to 180" - 4mS (Stroke Lengths 151" - 180")
Operating Temperature - -20o to 70o C
Span Length- 5" to 180"
Null Zone- 3.00"
Dead Zone- 2.00"
LED- Green = Power is applied and magnet is present. Red = Fault, magnet is in the Dead Zone or lost.
Connector - Standard 12 Pin Micro (Option E) 12mm Euro Connectoror 10 Pin HRS (Option H)
Approvals - CE
Enclosure - IP67, IP68 Optional (Connector Option E Only)
Specifications are subject to change without notice. Specifications are based on a typical 36" LDT.
 
Gemco Ordering Guide
955DQ Brik Manual
Magnets, Cables and Connector Styles
 

 

955DQ LDT Accessories
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-SD0521800 Ametek Gemco Slide Magnet Assembly 
Part SD0521800 
With the Top Center Mounted Swivel Linkage 
For use with 955 Low-Profile LDT's 
Normally a Stock Item @ BPI 
Ships from Stock to 1 Week  
Dated 01-2024 
(1LBS) H 4" L 5" W 4" Box
6 $61.00
2 AME-SD0522100 Ametek Gemco Magnet 955 
Part SD0522100 
Float Position Magnet 
For a 955 BRIK LDT's 
Normally a Stock Item @ BPI 
Ships from Stock to 2 Weeks 
Dated 01 2023 
(1LB) H 4" L 5" W 4" Box
7 $61.00
3 AME-SD0551500 Ametek Gemco Magnet 
Part SD0551500 
Large Width Floating Position Magnet 
For 955 BRIK LDT's 
Ships in 2 Weeks 
Dated 01-2023 
(1LBS) H 4" L 6" W 4" Box
0 $61.00
4 AME-SD0522000 Ametek Gemco Mounting Feet 955 LTD 
Part SD0522000 
Mounting Feet for use with 955 LDT's 
2 per LDT, plus 1 every 3 Feet  
Normally a Stock Item @ BPI 
Ships from Stock to 10 Days 
Dated 01-2023 
(1LB) H 4" L 5" W 4" Box
28 $6.00
5 AME-SD0527700L12 Ametek Gemco Cable Assembly 
Part SD0527700L12 
NOW OBSOLETE, But we still have Qty 4 
For the 956DQ LDT Connector 
Option H = HRS Environmental Connector 
10 Pin Connector 
12 Feet Long 
(1LB) H 2" L 6" W 6"
4 $108.00
6 AME-949023L6 Ametek Gemco Cable Assembly 
Part 949023L6 
For a 955DQ & 956DQ LDT 
6 Feet Long 
12 Pin Straight Connector 
Connector option "E", Euro Connector, 12 mm 
Other Lengths Available add or subtract $ 2.00 per foot 
Dated 1-2021 
(2LBS) H 6" L 5" W 5" Box
0 $80.00
7 AME-949023L12 Ametek Gemco Cable Assembly 
Part 949023L12 
For a 955DQ & 956DQ LDT 
12 Feet Long 
12 Pin Straight Connector 
Connector option "E", Euro Connector, 12 mm 
Other Lengths Available add or subtract $ 2.00 per foot 
Normally a Stock Item @ BPI 
Ships from Stock to 2 Weeks 
Dated 1-2021 
(2LBS) H 6" L 5" W 5" Box
0 $99.00
8 AME-955ARM12 Ametek Gemco Control Arm 955 12" 
Part 955ARM12 
Control Arm 
12 Inched Long 
Ships in 5 Days. Peck MI 
Dated 01-2021
- 0 $77.00
9 AME-955ARM15 Ametek Gemco Control Arm 
15 Inches Long 
For use with 955A & S, 955DQ & D, 955LC LDT's 
Female & Male Threaded Ends 1/4-28 
Other lengths available 3, 6, 9, 12, 15, 18, 22, 28 Inch or a custom length 
(1LBS) H 1.00" L 15.00" W 1.00" 
[Amazon] 
Dated 1-2021
1 $77.00
10 AME-955ARM18 Ametek Gemco Control Arm 
18 Inches Long 
For use with 955A & S, 955DQ & D, 955LC LDT's 
Female & Male Threaded Ends 1/4-28 
Other lengths available 3, 6, 9, 12, 15, 18, 22, 28 Inch or a custom length 
(1LBS) H 1.00" L 20.00" W 1.00" 
Dated 1-2021
- 0 $77.00
11 AME-955ARM22 Ametek Gemco 22 Inch Control Arm; Product line: 955 Acc 
Dated 1-2021
- 0 $77.00
12 AME-955ARM24 Ametek Gemco Control Arm 
24 Inches Long 
For use with 955A & S, 955DQ & D, 955LC LDT's 
Female & Male Threaded Ends 1/4-28 
Other lengths available 3, 6, 9, 12, 15, 18, 22, 28 Inch or a custom length 
(1LBS) H 1.00" L 24.00" W 1.00" 
Dated 1-2021
- 0 $92.00
13 AME-955ARM27 Ametek Gemco Control Arm 
27 Inches Long 
For use with 955A & S, 955DQ & D, 955LC LDT's 
Female & Male Threaded Ends 1/4-28 
Other lengths available 3, 6, 9, 12, 15, 18, 22, 28 Inch or a custom length 
(1LBS) H 1.00" L 28.00" W 1.00"
- 0 $87.57
14 AME-955ARM28 Ametek Gemco Control Arm 
28 Inches Long 
For use with 955A & S, 955DQ & D, 955LC LDT's 
Female & Male Threaded Ends 1/4-28 
Other lengths available 3, 6, 9, 12, 15, 18, 22, 28 Inch or a custom length 
(1LBS) H 1.00" L 28.00" W 1.00" 
Dated 1-2021
- 0 $92.00
15 AME-955ARM3 Ametek Gemco Control Arm 
3 Inches Long 
For use with 955A & S, 955DQ & D, 955LC LDT's 
Female & Male Threaded Ends 1/4-28 
Other lengths available 3, 6, 9, 12, 15, 18, 22, 28 Inch or a custom length 
(1LBS) H 1.00" L 4.00" W 1.00" 
Dated 1-2021
- 0 $60.00
16 AME-955ARM6 Ametek Gemco Control Arm 
6 Inches Long 
For use with 955A & S, 955DQ & D, 955LC LDT's 
Female & Male Threaded Ends 1/4-28 
Other lengths available 3, 6, 9, 12, 15, 18, 22, 28 Inch or a custom length 
(1LBS) H 1.00" L 6.00" W 1.00" 
Dated 1-2021
- 0 $60.00
17 AME-955ARM9 Ametek Gemco Control Arm 
9 Inches Long 
For a 955 LDT 
Dated 1-2021
- 0 $60.00
18 AME-04570252 Ametek Gemco Rod End 956 955 
Part 04570252 
For the 956 LDT or Control Arm 955ARM 
Female Thread 1/4 -28 5 MM Bore 
Normally a Stock Item @ BPI 
Ships form Stock to 10 Days 
Dated 1-2021 
(1LB) H 4" L 6" W 4" Box
2 $14.00
955DQ BRIK Gen III LDT
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 AME-955DQ-0060-E-1000-C-F8-X1-N Ametek Gemco Linear Distance Transducer model 955DQ-0060-E-1000-C-F8-X1-N-D-X 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0060 = 6 Inch Stroke/ Active Travel 
E = Euro 12 Pin, 12mm Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
C = Sourcing, typically used with sourcing output type  
F8 = 500 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
D = Differential RS422 Line Driver 
X = No Environment options
- 0 $652.32
2 AME-955DQ-0060-E-1000-C-F9-X1-N Ametek Gemco Linear Distance Transducer model 955DQ-0060-E-1000-C-F9-X1-N-D-X 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0060 = 6 Inch Stroke/ Active Travel 
E = Euro 12 Pin, 12mm Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
C = Sourcing, typically used with sourcing output type  
F9 = 1 MHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
D = Differential RS422 Line Driver 
X = No Environment options
- 0 $652.32
3 AME-955DQ-0060-E-1000-E-F7-X1-N Ametek Gemco Linear Distance Transducer model 955DQ-0060-E-1000-E-F7-X1-N-D-X 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0060 = 6 Inch Stroke/ Active Travel 
E = Euro 12 Pin, 12mm Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
E = Sinking Type, typically used with sourcing output type  
F7 = 250 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
D = Differential RS422 Line Driver 
X = No Environment options
- 0 $652.32
4 AME-955DQ-0158--500-T-F3X1-VDX Ametek Gemco Linear Distance Transducer model 955DQ-0158-E-500-T-F3-X1-VDX 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0158 = 15.8 Inch Stroke/ Active Travel 
E = Euro 12 Pin, 12mm Connector 
500 = 500 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
T = TTL Level  
F3 = 50 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
V = Volatile, Not Retentive 
D = Differential Line Driver 13.5 to 30 VDC, V out = V in (LDT Power) -1 Volt 
X = No Environment options
- 0 $676.08
5 AME-955DQ-0300-E-9999-E-F2-X1-N Ametek Gemco Linear Distance Transducer model 955DQ-0300-E-9999-E-F2-X1-N-L-X 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0300 = 30.0 Inch Stroke/ Active Travel 
E = Euro 12 Pin, 12mm Connector 
9999 = 9999 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
E = Sinking Type, typically used with sourcing output type  
F2 = 25 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
L = Differential Line Driver 13.5 to 30 VDC, V out = V in (LDT Power) - 1 Volt 
X = No Environment options
- 0 $725.76
6 AME-955DQ-0420-E-1000-E-F7-X1-N Ametek Gemco Linear Distance Transducer model 955DQ-0420-E-1000-E-F7-X1-N-D-X 
955DQ = BRIK Generation III with direct Quadrature Output 
Auto-Tuning Low Profile Package with LED Diagnostics 
0420 = 42.0 Inch Stroke/ Active Travel 
E = Euro 12 Pin, 12mm Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
E = Sinking Type, typically used with sourcing output type  
F7 = 250 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
D = Differential RS422 Line Driver 
X = No Environment options
- 0 $776.52
7 AME-955DQ-0750-E-1000-E-F1-X1-N Ametek Gemco Linear Distance Transducer model 955DQ-0750-E-1000-E-F1-X1-N-D-X 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0750 = 75.0 Inch Stroke/ Active Travel 
E = Euro 12 Pin, 12mm Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
E = Sinking Type, typically used with sourcing output type  
F1 = 10 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
D = Differential RS422 Line Driver 
X = No Environment options
- 0 $964.44
8 AME-955DQ-0940-H-1000-E-F1-X1-N Ametek Gemco Linear Distance Transducer model 955DQ-0940-H-1000-E-F1-X1-N-L-X 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0949 = 94.9 Inch Stroke/ Active Travel 
H = HRS Environmental Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
E = Sinking Type, typically used with sourcing output type  
F1 = 10 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
L = Differential Line Driver 13.5 to 30 VDC, V out = V in (LDT Power) -1 Volt 
X = No Environment options
- 0 $1,043.28
9 AME-955DQ-0940-H-1000-E-F7-X1-V Ametek Gemco Linear Distance Transducer model 955DQ-0940-H-1000-E-F7-X1-V 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0940 = 94.0 Inch Stroke/ Active Travel 
H = HRS Environmental Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
E = Sinking Type, typically used with sourcing output type  
F7 = 250 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
D = Differential RS422 Line Driver 
X = No Environment options
- 0 $1,043.28
10 AME-955DQ-1080-H-1000-E-F1-X1-N Ametek Gemco Linear Distance Transducer model 955DQ-1080-H-1000-E-F1-X1-N-L-X 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
1080 = 108.0 Inch Stroke/ Active Travel 
H = HRS Environmental Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
E = Sinking Type, typically used with sourcing output type  
F1 = 10 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
L = Differential Line Driver 13.5 to 30 VDC, V out = V in (LDT Power) -1 Volt 
X = No Environment options
- 0 $1,089.72
 

Secure Online Order
 

 
Secure Online Order
 
14,367 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 

Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
Application Notes

Application Notes
 
Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:
 
  • Cranes
  • Battery Manufacturing
  • Fiberglass Winders
  • Hydraulic Cylinders
  • Crusher/Baler
  • Stretch Hooding Machine
  • Electric Arc Furnace Cover
  • And more
PLS, PLC and Network Modules

PLS, PLC and Network Modules
 
  • 1746 LDT Interface Card
  • 1989 Quik-Set III Multi-Turn PLS
  • 1990DN DeviceNet Resolver
     Interface Module
  • 1991 Quik-Set IV UHS PLS
  • 1992 Press Set
  • 1995A/B/E/L Micro-Set PLS
  • 1996 Ram Set
  • 2110 Shut Height Monitor
  • 2120 PLC Interface Module
  • 2500 High Speed PLS
 
Rotary Feedback

Rotary Limit Switches, Position Sensors, Resolvers, Encoders
 
  • 1950 Precision Snap Switches
  • 1970 Drive-Chek Control
  • 1980 Rotating Cam Limit Switch
  • 1980R Rotating Cam Limit
     Switch with Resolver
  • 1983 Optical Limit Switch
  • 1986A standard foot mount
  • 1986B 2.25" sqr flange mount
  • 1986C 2.06" sqr flange mount
  • 1986D 2.50" dia face mount
  • 1986DN DeviceNet resolver
  • 1986E 100mm face mount
  • 1986G square flange mount
  • 1986GG multi-turn dual
  • 1986I 4.00" round face mount
  • 1986F standard block style
  • 1986H servo mount resolver
  • 1986MD mill duty housing
  • 1986XP explosion proof
  • 1997 Gate Hoist Rotating Cam
     Limit Switch, Designed to
     Meet Specifications of The
     Corps of Engineers

  • 2000 RLS
  • 2006 RLS
  • 3001 Adjustable Couplings
Linear Feedback

Linear Displacement Transducers
 
  • 925 Linear Cable Reel Sensor
  • 950IS Intrinsically Safe LDT
  • 950MD Mill Duty Housing LDT
  • 952 BlueOx LDT
  • 953A/D/SSI VMAX LDT
  • 953N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 955 eBrik
  • 955A BRIK Gen III LDT
  • 955C/CA/CD/CDQ BRIK Gen III
  • 955D BRIK Gen III LDT
  • 955DQ BRIK Gen III LDT
  • 955LC BRIK LDT
  • 955S Smart BRIK LDT
  • 955 BRIK Accessories
  • 956 BLOK Housing Option
  • 956S BLOK LDT
  • 957N ReadyLink EtherNet/IP
    LDT with RapidRecall
  • 957A, D & SSI Brik LDT
  • 957A/D/SSI BRIK LDT
    Accessories
  • Rod Style LDT Accessories
  • LDT Magnets, Cables,
    Accessories and Parts
  • 958A Embedded LDT
Other Measurements

Other Measurements
 
  • 6012/6013 Electrode
    Holders/Electrodes
  • 7010 Tilt Switch Float
  • 7014 Unifloat
  • 7100 Leak Detect Stik
  • 7230 HT Digital Probe
  • 7250 Digital Stik
  • 7330 Pro-Stik II
Press Safety Products

Press Safety Products
 
  • 1999 Semelex II Safetimeter
  • 1025 Foot and Palm Switches
 
Gemco Industrial Brakes

Gemco Industrial Brakes
 
Electro-Thrust Brakes (ET)
   - Thrust Shoe Brakes
Hydraulic Brakes (H, HM)
   - Hydraulic Shoe Brakes
   - Replacement Parts
Magnetic Brakes (TM)
   - Magnetic DC Shoe Brakes
   - Replacement Parts
Solenoid Brakes (CB)
   - Solenoid AC Shoe Brakes
MSDS
   - MSDS Information
Control Relays

Control Relays
 
  • 1500 Induction Style Relay
  • 5200 Solid State Relay
  • 5400 Plug In Style Solid State
    Relay
  • 5600 Solid State Relay
  • 8040 Standard Control and
    Alarm Panel
  • Motogard - Over-Temperature
    Protection
Frequently Requested Quotations

Frequently Requested Quotations
 
  • Actuating Cylinder
  • Hydraulic Shoe Brakes
  • Solenoid DC Shoe Brakes
  • Solenoid AC Shoe Brakes
  • Various Replacement Parts
  • 1950 Series Snap Switches
  • And more
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
  ACH Form: Word   /   PDF
Supplier of Industrial Brake Parts Since 1985