|Linear Displacement Transducers
955D BRIK Gen III LDT
The 955D BRIK is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The BRIK is
a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one
inch tall. It is available in analog, digital, and quadrature outputs. The BRIK can be ordered in span lengths up to 180 inches long in 0.1 inch
increments. Applications include: Presses, blow molding, extrusion, roll positioning, dancer control and many more.
Input Voltage- 13.5 to 30 VDC
Current Draw- 2.5 Watts Maximum, 120 mA @ 15 VDC Typical
Output- Control Pulse, Variable Pulse, Stop/Start
Resolution- Controller Dependent
Non-Linearity- +/- 0.05% of Stroke
Repeatbility- +/- 0.006% of Full Stroke
Hysteresis- +/- 0.02% of Full Scale
Update- Controller Dependent
Operating Temperature- -20o to 70o C
Span Length- 5" to 180"
Null Zone- 3.00"
Dead Zone- 2.00"
LED- Green = Power is applied and magnet is present. Red = Fault, magnet is in the Dead Zone or lost. Yellow = No Interrogation Signal
Connector - Standard 6 Pin Micro 12mm Euro Connector
Approvals - CE
Enclosure- IP67, IP68 Optional
Specifications are subject to change without notice. Specifications are based on a typical 36" LDT.
Gemco Ordering Guide
955D BRIK LDT Manual
Magnets, Cables and Connector Styles