Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)

BRAKE PRODUCTS 74,494 part numbers: Brake Wheels & Discontinued Brake Parts   GEMCO 14,168 part numbers: Motion Control Products     GLEASON 21,294 part numbers: Cable & Hose Management Systems   AERO-MOTIVE 3,616 part numbers: Cable & Hose Management Systems   CUTLER-HAMMER 6,324 part numbers: Electrical Control Products             STEARNS 6,627 part numbers: Motor Mounted Brakes   HUBBELL 16,101 part numbers: Electrical Control Products   SUPERBOLT 109 part numbers: Fastening Solutions   TELEMOTIVE 2,473 part numbers: Radio Remote Control   RENOLD 401 part numbers: Mechanical Power Transmission Products

 

Aero-Motive Direct Amazon Store   69 part numbers   Brake Products Amazon Store   507 part numbers

 

Check out our expanded Wagner inventory:

 

Web: www.GemcoDirect.com	Email: sales@GemcoDirect.com	Phone: (888) 861-8777

 

Control Relays   Motogard - Over-Temperature Protection   DESCRIPTION   Motogard Over-Temperature Protection Systems provide immediate overheating protection for: motors, equipment enclosures, semiconductor heat sinks, sleeve bearings, and other related machinery. All Motogard systems fully conform to the NEC requirements for integral motor thermal protection. Using Positive Temperature Coefficient (PTC) thermistors embedded in or in contact with the surface, the Motogard system is able to continually sense when the equipment exceeds the pre-selected temperature limits.   Motogard systems are recommended for applications requiring high reliability under conditions of heavy duty or severe ambient contamination. Minimum rif interference, absence of arcing, and maintenance-free long life are built into the Motogard systems.   • Motogard - Brochure • Motogard 115 Installation Instructions • Motogard 120 Installation Instructions • Motogard 135 Installation Instructions • Motogard 150 Installation Instructions • Motogard Installation Manual       Motogard - Over-Temperature Protection No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-115101-2 Ametek Gemco MOTOGARD 9966  Part 115101-2  Series 115 Over Temperature Protection System  6 Inputs, 2 Triac Outputs 1 N.O. 1 N.C.  Input Rating: 120 VAC + or - 10% Single Phase 50 / 60 Hz  Output Rating: 120 / 240 Volts 5 AMP Continuous  Automatic Reset  NEMA 4 Enclosure 5.5" Wide X 4.25" Long X 3.12" High  [Amazon]  [Ships from Stock to 2 Weeks]  [Updated 1-19]  (5LBS) H 4" L 6" W 4" Box 0 $491.00 2 AME-120101 Ametek Gemco MOTOGARD 9966  Part 120101  Series 120 Over Temperature Protection System  MOTOGARD Over-Temperature Protection Systems  provide immediate overheating protection for:  Motors  Equipment Enclosures  Semiconductor Heatsinks  Sleeve Bearings  and other related machinery  fully conform to the NEC  requirements for integral motor thermal protection  Using Positive Temperature Coefficient (PTC)  Thermistors embedded in or in contact with the  surface, the MOTOGARD system is able to continually  sense when the equipment exceeds the pre-selected  temperature limits. Thermistors are NOT included  Ships from Stock to 2 Weeks  Updated 1-19  (1LB) H 4" L 8" W 4" Box 2 $315.00 3 AME-135101 Ametek Gemco MOTOGARD 9966  Part 135101  Series 135 Over Temperature Protection System  [Ships in 2 Weeks]  [Updated 1-19] - 0 $628.00 4 AME-150101 Ametek Gemco MOTOGARD 9966  Part 150101  Series 150 Over Temperature Protection System  Provide Immediate Overheating Protection for:  Motors Equipment Enclosures  Semiconductor Heatsinks  Sleeve Bearings and other related machinery  For use with PTC Thermistors embedded in or in contact with the monitored surface  1 Input, Form C Relay Output  2 Triac Outputs 1-N.O. 1 N.C.  Input Rating: 120 VAC + or - 10% Single Phase 50 / 60 Hz  Output Rating: 120 VAC for Size 5 Contactor Coil  Reset is Automatic  Enclosure is 3.25" Wide X 2.25" Long X 2.50" High  Potted in a Polyester Case  Conforms with NEC Requirements for Integral Motor Thermal Protection  [Amazon]  [Ships from Stock to 2 Weeks]  [Updated 1-19]  (1LB) H 4" L 6" W 5" Box 1 $249.00 Thermistors No Part Number Description Image Stock Qty Price Each Qty Ord'd Update Cart 1 AME-104A022-4-44-T8155 Ametek Gemco Thermistor. Spring Loaded Probe Thermistor. 4 Inch Length, 44 Inch Lead - 0 $202.00 2 AME-T8060 Ametek Gemco Thermistor 60 C  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  60 C + or - 5 Degrees  140 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Gray Leads - 0 $31.58 3 AME-T8070 Ametek Gemco Thermistor 70 C  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  70 C + or - 5 Degrees  158 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Brown Leads - 0 $23.00 4 AME-T8075 Ametek Gemco Thermistors  series 9967 BASIC Thermistor  For MOTOGARD Controllers  Designed for use with Positive Temperature Coefficient Thermistors  75 Degree C  Switches @ + or - 5 %  Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity  # 22 - 26 Teflon Insulated Leads  6 Inch Wire Leads  (1LBS) H 3.00" L 4.00" W 3.00"  [Amazon] 2 $24.00 5 AME-T8080 Ametek Gemco Thermistor 80 C  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  80 C + or - 5 Degrees  176 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & White Leads - 0 $23.00 6 AME-T8085 Ametek Gemco Thermistors. 9967 BASIC Thermistor. MOTOGARD Controllers are designed for use with Positive Temperature Coefficient Thermistors. 155 Degree C. Switches @ + or - 5 %. Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity# 22 - 26 Teflon Insulated Leads. Specify desired length of the leads. 6 Inch Minimum (<1LB) - 0 $24.00 7 AME-T8090 Ametek Gemco Thermistor 90 C  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  90 C + or - 5 Degrees  194 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Green & Green Leads  [Amazon] Dated 1/8  (1LBS) H 4" L 5" W 4" Box 10 $23.00 8 AME-T8095 Ametek Gemco Thermistors  Part T8095  Series 9967 BASIC Thermistor  For MOTOGARD Controllers  Designed for use with Positive Temperature Coefficient Thermistors  95 Degree C  Switches @ + or - 5%  Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity  # 22 - 26 Teflon Insulated Leads  6 Inch Wire Leads  [Amazon] Dated 1/18  (1LBS) H 4" L 5" W 4" Box 2 $24.00 9 AME-T8100 Ametek Gemco Thermistor 100 C  Part T8100  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  100 C + or - 5 Degrees  212 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Red & Red Leads  Dated 1/18 - 0 $23.00 10 AME-T8105 Ametek Gemco Thermistors  Part T8105  9967 BASIC Thermistor. MOTOGARD Controllers are designed for use with Positive Temperature Coefficient Thermistors. 105 Degree C. Switches @ + or - 5%. Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity# 22 - 26 Teflon Insulated Leads. Specify desired length of the leads. 6 Inch Minimum  [Amazon] Dated 1/18  (1LB) H 4" L 5" W 4" Box 1 $24.00 11 AME-T8110 Ametek Gemco Thermistor 110 C  Part T8110  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  110 C + or - 5 Degrees  230 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Brown & Brown Leads  Dated 1/18 - 0 $23.00 12 AME-T8115 Ametek Gemco Thermistors  Series 9967 BASIC Thermistor  For MOTOGARD Controllers are designed for use with Positive Temperature Coefficient Thermistors  115 Degree C  Switches @ + or - 5 %  Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity  # 22 - 26 Teflon Insulated Leads  6 Inch Wire Leads  [Amazon] Dated 1/18  (1LB) H 4" L 5" W 4" Box 3 $24.00 13 AME-T8120 Ametek Gemco Thermistor 120 C  Part T8120  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  120 C + or - 5 Degrees  248 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Gray & Gray Leads  [Amazon] Dated 1/18  (1LB) H 4" L 5" W 4" Box 0 $24.00 14 AME-T8125 Ametek Gemco Thermistors  Part T8125  Series 9967 BASIC Thermistor  For MOTOGARD Controllers  Designed for use with Positive Temperature Coefficient Thermistors  125 Degree C  Switches @ + or - 5%  Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity  # 22 - 26 Teflon Insulated Leads  6 Inch Wire Leads  [Amazon] Dated 1/18  (1LB) H 4" L 5" W 4" Box 0 $24.00 15 AME-T8130 Ametek Gemco Thermistor 130 C  Part T8130  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  130 C + or - 5 Degrees  266 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, Blue & Blue Leads  [Amazon]  (1LB) H 4" L 5" W 4" Box 3 $23.00 16 AME-T8135 Ametek Gemco Thermistors  Part T8135  9967 BASIC Thermistor.  MOTOGARD Controllers are designed for use with Positive Temperature Coefficient Thermistors. 135 Degree C, 275 Degree F. Switches @ + or - 5%. Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity# 22 - 26 Teflon Insulated Leads. Specify desired length of the leads. 6 Inch Minimum (<1LB)  Dated 1/18 - 0 $24.00 17 AME-T8140 Ametek Gemco Thermistor 140 C  Part T8140  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  140C + or - 5 Degrees  284 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Blue Leads  [Amazon] Dated 1/18  (1LBS) H 4" L 5" W 4" Box 3 $23.00 18 AME-T8145 Ametek Gemco Thermistors  Part T8145  Series 9967 BASIC Thermistor  For MOTOGARD Controllers  Designed for use with Positive Temperature Coefficient Thermistors  145 Degree C  Switches @ + or - 5%  Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity  # 22 - 26 Teflon Insulated Leads  6 Inch Wire Leads  [Amazon] Dated 1/18  (1LB) H 4" L 5" W 4" Box 0 $24.00 19 AME-T8150 Ametek Gemco Thermistor 150 C  Part T8150  9967 Series Thermistors  Part AME-T8150  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature 150 C + or - 5 Degree  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty  [Amazon] 1/18  (1LB) H 4" L 5" W 4" Box 10 $23.00 20 AME-T8155 Ametek Gemco Thermistors  OBSOLETE  Series 9967 BASIC Thermistor  For MOTOGARD Controllers  Designed for use with Positive Temperature Coefficient Thermistors  155 Degree C  Switches @ + or - 5%  Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity  # 22 - 26 Teflon Insulated Leads  6 Inch Wire Leads  [Amazon] Dated 1/18  (1LB) H 4" L 5" W 4" Box 0 $24.00 21 AME-T8160 Ametek Gemco Thermistor 160 C  Part T8160  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature 160 C + or - 5 Degree  320 F  Color Code Blue / Red  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty  Dated 1/19  (1LB) H 4" L 5" W 4" Box 0 $23.00 22 AME-T8165 Ametek Gemco Thermistors  Part T8185  OBSOLETE  Series 9967 BASIC Thermistor  For MOTOGARD Controllers  Designed for use with Positive Temperature Coefficient Thermistors  165 Degree C  Switches @ + or - 5%  Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity  # 22 - 26 Teflon Insulated Leads  6 Inch Wire Leads  [Amazon]  (1LB) H 4" L 5" W 4" Box 1 $22.00 23 AME-T8170 Ametek Gemco Thermistor 170 C  Part T8170  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  170C + or - 5 Degrees  338 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Green Leads  [Amazon] Dated 1/18  (1LB) H 4" L 5" W 4" Box 9 $23.00 24 AME-T8175 Ametek Gemco Thermistors  Part T8175  Series 9967 BASIC Thermistor  For MOTOGARD Controllers  Designed for use with Positive Temperature Coefficient Thermistors  175 Degree C  Switches @ + or - 9%  Thermistor is encapsulated in a special epoxy for rugged mechanical duty, severe environments and good thermal conductivity  # 22 - 26 Teflon Insulated Leads  6 Inch Wire Leads  [Amazon] Dated 1/18  (1LB) H 4" L 5" W 4" Box 13 $33.28 25 AME-T8180 Ametek Gemco Thermistor 180 C  Part T8180  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  180 C + or - 5 Degrees  356 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Red Leads  Dated 1/18 - 0 $23.00 26 AME-T8190 Ametek Gemco Thermistor 190 C  Part T8190  9967 Series Thermistors  PTC Positive Temperature Control Thermistor  Snap Action Response at Rated Temperature  190 C + or - 5 Degrees  374 F + or - 9 Degrees  High speed overtemperature sensing with no switch point drift or aging  Epoxy Encapsulated for rugged mechanical duty, 24 AWG by 6 Inches, White & Gray Leads  Dated 1/18 - 0 $24.00

Secure Online Order     Secure Online Order   14,168 part numbers available for online order   Shopping Cart Empty Checkout is secure   All products are covered by a $1,000,000 liability insurance: Click to view the Certificate Products Available From Stock Free shipping via UPS Ground (continental US only, motor freight excluded)

Web Site Features   Part Number Lookup   Enter at least three characters of a Gemco part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:   Part Number:   Search scope: This web site only All BPI web sites   Formal PDF Quotation   To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.   Your shopping cart is kept intact and you can still check out at a later time.

Application Notes Application Notes   Check-out application notes compiled using real-life situations our clients have efficiently resolved using various Gemco products, in these application areas:     • Cranes   • Battery Manufacturing   • Fiberglass Winders   • Hydraulic Cylinders   • Crusher/Baler   • Stretch Hooding Machine   • Electric Arc Furnace Cover   • And more

PLS, PLC and Network Modules PLS, PLC and Network Modules     • 1746 LDT Interface Card   • 1989 Quik-Set III Multi-Turn PLS   • 1990DN DeviceNet Resolver      Interface Module   • 1991 Quik-Set IV UHS PLS   • 1992 Press Set   • 1995A/B/E/L Micro-Set PLS   • 1996 Ram Set   • 2110 Shut Height Monitor   • 2120 PLC Interface Module   • 2500 High Speed PLS

 

Rotary Feedback Rotary Limit Switches, Position Sensors, Resolvers, Encoders     • 1950 Precision Snap Switches   • 1970 Drive-Chek Control   • 1980 Rotating Cam Limit Switch   • 1980R Rotating Cam Limit      Switch with Resolver   • 1983 Optical Limit Switch   • 1986A standard foot mount   • 1986B 2.25" sqr flange mount   • 1986C 2.06" sqr flange mount   • 1986D 2.50" dia face mount   • 1986DN DeviceNet resolver   • 1986E 100mm face mount   • 1986G square flange mount   • 1986GG multi-turn dual   • 1986I 4.00" round face mount   • 1986F standard block style   • 1986H servo mount resolver   • 1986MD mill duty housing   • 1986XP explosion proof   • 1997 Gate Hoist Rotating Cam      Limit Switch, Designed to      Meet Specifications of The      Corps of Engineers   • 2000 RLS   • 2006 RLS   • 3001 Adjustable Couplings

Linear Feedback Linear Displacement Transducers     • 925 Linear Cable Reel Sensor   • 950IS Intrinsically Safe LDT   • 950MD Mill Duty Housing LDT   • 952 BlueOx LDT   • 953A/D/SSI VMAX LDT   • 953N ReadyLink EtherNet/IP     LDT with RapidRecall   • 955 eBrik   • 955A BRIK Gen III LDT   • 955C/CA/CD/CDQ BRIK Gen III   • 955D BRIK Gen III LDT   • 955DQ BRIK Gen III LDT   • 955LC BRIK LDT   • 955S Smart BRIK LDT   • 955 BRIK Accessories   • 956 BLOK Housing Option   • 956S BLOK LDT   • 957N ReadyLink EtherNet/IP     LDT with RapidRecall   • 957A, D & SSI Brik LDT   • 957A/D/SSI BRIK LDT     Accessories   • Rod Style LDT Accessories   • LDT Magnets, Cables,     Accessories and Parts   • 958A Embedded LDT

Other Measurements Other Measurements     • 6012/6013 Electrode     Holders/Electrodes   • 7010 Tilt Switch Float   • 7014 Unifloat   • 7100 Leak Detect Stik   • 7230 HT Digital Probe   • 7250 Digital Stik   • 7330 Pro-Stik II

Press Safety Products Press Safety Products     • 1999 Semelex II Safetimeter   • 1025 Foot and Palm Switches

 

Gemco Industrial Brakes Gemco Industrial Brakes   • Electro-Thrust Brakes (ET)    - Thrust Shoe Brakes • Hydraulic Brakes (H, HM)    - Hydraulic Shoe Brakes    - Replacement Parts • Magnetic Brakes (TM)    - Magnetic DC Shoe Brakes    - Replacement Parts • Solenoid Brakes (CB)    - Solenoid AC Shoe Brakes

Control Relays Control Relays     • 1500 Induction Style Relay   • 5200 Solid State Relay   • 5400 Plug In Style Solid State     Relay   • 5600 Solid State Relay   • 8040 Standard Control and     Alarm Panel   • Motogard - Over-Temperature     Protection

Frequently Requested Quotations Frequently Requested Quotations     • Actuating Cylinder   • Hydraulic Shoe Brakes   • Solenoid DC Shoe Brakes   • Solenoid AC Shoe Brakes   • Various Replacement Parts   • 1950 Series Snap Switches   • And more

 

This web site is owned and operated by Brake Products, Inc.   16751 Hilltop Park Place   Chagrin Falls, Ohio 44023   Phone: (440) 543-7962   Fax:     (440) 543-7963   Web:   www.brakeproducts.com   Email: sales@brakeproducts.com   Federal ID #: 34-1473351   CAGE Code: 1QTP8   DUNS# 14-748-2392   Download: Form W-9 Supplier of Industrial Brake Parts Since 1985